From: Nero <neroz@iinet.net.au>
To: linux-kernel@vger.kernel.org
Subject: IDE performance slowdown in 2.5
Date: Wed, 20 Nov 2002 13:31:39 +1100 [thread overview]
Message-ID: <3DDAF40B.9000002@iinet.net.au> (raw)
With 2.5.47, I get 22mb/s using hdparm -t /dev/hda, and close to 40mb/s
when running 2.4.x
Is this at all expected?
Info from hdparm:
[13:19:08] root@debian:/proc# hdparm -v /dev/hda
/dev/hda:
multcount = 0 (off)
IO_support = 1 (32-bit)
unmaskirq = 1 (on)
using_dma = 1 (on)
keepsettings = 0 (off)
readonly = 0 (off)
readahead = 256 (on)
geometry = 50765/16/63, sectors = 117231408, start = 0
[13:18:51] root@debian:/proc# hdparm -i /dev/hda
/dev/hda:
Model=ST360021A, FwRev=3.05, SerialNo=3HR01F5W
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
BuffType=unknown, BuffSize=2048kB, MaxMultSect=16, MultSect=off
CurCHS=4047/16/255, CurSects=16511760, LBA=yes, LBAsects=117231408
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=no WriteCache=enabled
Drive conforms to: device does not report version: 1 2 3 4 5
Info from dmesg:
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 00:07.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:07.1
ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:DMA
hda: C/H/S=28733/16/255 from BIOS ignored
hda: ST360021A, ATA DISK drive
hda: DMA disabled
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: RICOH CD-R/RW MP7163A, ATAPI CD/DVD-ROM drive
hdd: CD-ROM 32X/AKU, ATAPI CD/DVD-ROM drive
hdc: DMA disabled
hdd: DMA disabled
ide1 at 0x170-0x177,0x376 on irq 15
hda: host protected area => 1
hda: 117231408 sectors (60022 MB) w/2048KiB Cache, CHS=116301/16/63,
UDMA(100)
hda: hda1 < hda5 > hda2 hda3
hdc: ATAPI 32X CD-ROM CD-R/RW drive, 2048kB Cache, DMA
(Why does it say DMA disabled there [for hda], yet hdparm says its
enabled? I checked that there is no init script changing settings on the
drives.)
next reply other threads:[~2002-11-20 3:24 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-11-20 2:31 Nero [this message]
2002-11-20 2:44 ` IDE performance slowdown in 2.5 Nero
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3DDAF40B.9000002@iinet.net.au \
--to=neroz@iinet.net.au \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox