From: jorg de jong <jorg@dejong.info>
To: linux-kernel@vger.kernel.org
Subject: status of HPT374 support in 2.4.20 and 2.5.50
Date: Sat, 07 Dec 2002 22:26:10 +0100 [thread overview]
Message-ID: <3DF26772.8040502@dejong.info> (raw)
Hi,
I just bought a Highpoint Rocketraid 404 controler. To my suppirce I
found that
the kernel I was using does not like it one bit. The kernel entered a
kernel panic/BUG
in file hpt666.c:1031. The kernel was a Redhat stock kernel
2.4.18-18.8.0smp.
Not afraid to build my own kernel I tried:
- 2.4.20; which also stoped with a kernel panic.
- 2.4.20-ac1; this kernel boots just fine. It even sees the controller
but does not detect
the drive.
- 2.5.46; sees the controler but no drive
- 2.5.50; sees the controler but no drive
Google told me that there are successes with the HPT374 contoller(kernel
2.5.46),
but thus far not for me.
Some info about by system:
motherboard: msi k7d; dual amd athlon mp 2000+
onboard ide controller: AMD7441
other pci ide controller: PDC20267
Please help,
regards,
Jorg de Jong
part of dmesg (2.4.20-ac1):
Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
AMD7441: IDE controller at PCI slot 00:07.1
AMD7441: chipset revision 4
AMD7441: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xb000-0xb007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xb008-0xb00f, BIOS settings: hdc:DMA, hdd:DMA
HPT374: IDE controller at PCI slot 00:09.0
HPT374: chipset revision 7
HPT374: not 100% native mode: will probe irqs later
PDC20267: IDE controller at PCI slot 02:05.0
PDC20267: chipset revision 2
PDC20267: not 100% native mode: will probe irqs later
PDC20267: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI Mode.
ide2: BM-DMA at 0x9000-0x9007, BIOS settings: hde:DMA, hdf:pio
ide3: BM-DMA at 0x9008-0x900f, BIOS settings: hdg:DMA, hdh:DMA
hda: ST340823A, ATA DISK drive
blk: queue c0399fa0, I/O limit 4095Mb (mask 0xffffffff)
hdc: LITE-ON LTR-48125S, ATAPI CD/DVD-ROM drive
hdd: TOSHIBA DVD-ROM SD-M1212, ATAPI CD/DVD-ROM drive
hde: ST360021A, ATA DISK drive
blk: queue c039a878, I/O limit 4095Mb (mask 0xffffffff)
hdg: ST360021A, ATA DISK drive
hdh: ST360021A, ATA DISK drive
blk: queue c039ace4, I/O limit 4095Mb (mask 0xffffffff)
blk: queue c039ae30, I/O limit 4095Mb (mask 0xffffffff)
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide2 at 0x8000-0x8007,0x8402 on irq 17
ide3 at 0x8800-0x8807,0x8c02 on irq 17
hda: 78165360 sectors (40021 MB) w/1024KiB Cache, CHS=4865/255/63, UDMA(100)
hde: host protected area => 1
hde: 117231408 sectors (60022 MB) w/2048KiB Cache, CHS=116301/16/63,
UDMA(100)
hdg: host protected area => 1
hdg: 117231408 sectors (60022 MB) w/2048KiB Cache, CHS=116301/16/63,
UDMA(100)
hdh: host protected area => 1
hdh: 117231408 sectors (60022 MB) w/2048KiB Cache, CHS=116301/16/63,
UDMA(100)
next reply other threads:[~2002-12-07 21:18 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-12-07 21:26 jorg de jong [this message]
2002-12-07 21:53 ` status of HPT374 support in 2.4.20 and 2.5.50 Andrew Morton
2002-12-07 22:26 ` Jorg de Jong
2002-12-07 22:49 ` Andrew Morton
2002-12-08 1:29 ` Alan Cox
2002-12-09 14:22 ` jorg de jong
2002-12-09 15:51 ` Alan Cox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3DF26772.8040502@dejong.info \
--to=jorg@dejong.info \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox