* Re: status of HPT374 support in 2.4.20 and 2.5.50
2002-12-07 21:26 status of HPT374 support in 2.4.20 and 2.5.50 jorg de jong
@ 2002-12-07 21:53 ` Andrew Morton
2002-12-07 22:26 ` Jorg de Jong
0 siblings, 1 reply; 7+ messages in thread
From: Andrew Morton @ 2002-12-07 21:53 UTC (permalink / raw)
To: jorg de jong; +Cc: linux-kernel
jorg de jong wrote:
>
> Hi,
>
> I just bought a Highpoint Rocketraid 404 controler. To my suppirce I
> found that
> the kernel I was using does not like it one bit. The kernel entered a
> kernel panic/BUG
> in file hpt666.c:1031. The kernel was a Redhat stock kernel
> 2.4.18-18.8.0smp.
>
> Not afraid to build my own kernel I tried:
> - 2.4.20; which also stoped with a kernel panic.
> - 2.4.20-ac1; this kernel boots just fine. It even sees the controller
> but does not detect
> the drive.
> - 2.5.46; sees the controler but no drive
> - 2.5.50; sees the controler but no drive
>
This patch (against 2.4.20) is the one I use when I need to
use the hpt374 in 2.4 kernels.
drivers/ide/hpt366.c | 468 ++++++++++++++++++++++++++++++++++++++++----------
drivers/ide/ide-pci.c | 69 ++++++-
2 files changed, 446 insertions(+), 91 deletions(-)
--- 24/drivers/ide/hpt366.c~hpt374 Sat Dec 7 13:51:38 2002
+++ 24-akpm/drivers/ide/hpt366.c Sat Dec 7 13:51:38 2002
@@ -166,9 +166,8 @@ struct chipset_bus_clock_list_entry {
* PIO.
* 31 FIFO enable.
*/
-struct chipset_bus_clock_list_entry forty_base [] = {
-
- { XFER_UDMA_4, 0x900fd943 },
+struct chipset_bus_clock_list_entry forty_base_hpt366[] = {
+ { XFER_UDMA_4, 0x900fd943 },
{ XFER_UDMA_3, 0x900ad943 },
{ XFER_UDMA_2, 0x900bd943 },
{ XFER_UDMA_1, 0x9008d943 },
@@ -186,8 +185,7 @@ struct chipset_bus_clock_list_entry fort
{ 0, 0x0120d9d9 }
};
-struct chipset_bus_clock_list_entry thirty_three_base [] = {
-
+struct chipset_bus_clock_list_entry thirty_three_base_hpt366[] = {
{ XFER_UDMA_4, 0x90c9a731 },
{ XFER_UDMA_3, 0x90cfa731 },
{ XFER_UDMA_2, 0x90caa731 },
@@ -206,7 +204,7 @@ struct chipset_bus_clock_list_entry thir
{ 0, 0x0120a7a7 }
};
-struct chipset_bus_clock_list_entry twenty_five_base [] = {
+struct chipset_bus_clock_list_entry twenty_five_base_hpt366[] = {
{ XFER_UDMA_4, 0x90c98521 },
{ XFER_UDMA_3, 0x90cf8521 },
@@ -331,6 +329,144 @@ struct chipset_bus_clock_list_entry fift
{ 0, 0x0ac1f48a }
};
+struct chipset_bus_clock_list_entry thirty_three_base_hpt372[] = {
+ { XFER_UDMA_6, 0x1c81dc62 },
+ { XFER_UDMA_5, 0x1c6ddc62 },
+ { XFER_UDMA_4, 0x1c8ddc62 },
+ { XFER_UDMA_3, 0x1c8edc62 }, /* checkme */
+ { XFER_UDMA_2, 0x1c91dc62 },
+ { XFER_UDMA_1, 0x1c9adc62 }, /* checkme */
+ { XFER_UDMA_0, 0x1c82dc62 }, /* checkme */
+
+ { XFER_MW_DMA_2, 0x2c829262 },
+ { XFER_MW_DMA_1, 0x2c829266 }, /* checkme */
+ { XFER_MW_DMA_0, 0x2c82922e }, /* checkme */
+
+ { XFER_PIO_4, 0x0c829c62 },
+ { XFER_PIO_3, 0x0c829c84 },
+ { XFER_PIO_2, 0x0c829ca6 },
+ { XFER_PIO_1, 0x0d029d26 },
+ { XFER_PIO_0, 0x0d029d5e },
+ { 0, 0x0d029d5e }
+};
+
+struct chipset_bus_clock_list_entry fifty_base_hpt372[] = {
+ { XFER_UDMA_5, 0x12848242 },
+ { XFER_UDMA_4, 0x12ac8242 },
+ { XFER_UDMA_3, 0x128c8242 },
+ { XFER_UDMA_2, 0x120c8242 },
+ { XFER_UDMA_1, 0x12148254 },
+ { XFER_UDMA_0, 0x121882ea },
+
+ { XFER_MW_DMA_2, 0x22808242 },
+ { XFER_MW_DMA_1, 0x22808254 },
+ { XFER_MW_DMA_0, 0x228082ea },
+
+ { XFER_PIO_4, 0x0a81f442 },
+ { XFER_PIO_3, 0x0a81f443 },
+ { XFER_PIO_2, 0x0a81f454 },
+ { XFER_PIO_1, 0x0ac1f465 },
+ { XFER_PIO_0, 0x0ac1f48a },
+ { 0, 0x0a81f443 }
+};
+
+struct chipset_bus_clock_list_entry sixty_six_base_hpt372[] = {
+ { XFER_UDMA_6, 0x1c869c62 },
+ { XFER_UDMA_5, 0x1cae9c62 },
+ { XFER_UDMA_4, 0x1c8a9c62 },
+ { XFER_UDMA_3, 0x1c8e9c62 },
+ { XFER_UDMA_2, 0x1c929c62 },
+ { XFER_UDMA_1, 0x1c9a9c62 },
+ { XFER_UDMA_0, 0x1c829c62 },
+
+ { XFER_MW_DMA_2, 0x2c829c62 },
+ { XFER_MW_DMA_1, 0x2c829c66 },
+ { XFER_MW_DMA_0, 0x2c829d2e },
+
+ { XFER_PIO_4, 0x0c829c62 },
+ { XFER_PIO_3, 0x0c829c84 },
+ { XFER_PIO_2, 0x0c829ca6 },
+ { XFER_PIO_1, 0x0d029d26 },
+ { XFER_PIO_0, 0x0d029d5e },
+ { 0, 0x0d029d26 }
+};
+
+struct chipset_bus_clock_list_entry thirty_three_base_hpt374[] = {
+ { XFER_UDMA_6, 0x12808242 },
+ { XFER_UDMA_5, 0x12848242 },
+ { XFER_UDMA_4, 0x12ac8242 },
+ { XFER_UDMA_3, 0x128c8242 },
+ { XFER_UDMA_2, 0x120c8242 },
+ { XFER_UDMA_1, 0x12148254 },
+ { XFER_UDMA_0, 0x121882ea },
+
+ { XFER_MW_DMA_2, 0x22808242 },
+ { XFER_MW_DMA_1, 0x22808254 },
+ { XFER_MW_DMA_0, 0x228082ea },
+
+ { XFER_PIO_4, 0x0a81f442 },
+ { XFER_PIO_3, 0x0a81f443 },
+ { XFER_PIO_2, 0x0a81f454 },
+ { XFER_PIO_1, 0x0ac1f465 },
+ { XFER_PIO_0, 0x0ac1f48a },
+ { 0, 0x06814e93 }
+};
+
+#if 0
+struct chipset_bus_clock_list_entry fifty_base_hpt374[] = {
+ { XFER_UDMA_6, },
+ { XFER_UDMA_5, },
+ { XFER_UDMA_4, },
+ { XFER_UDMA_3, },
+ { XFER_UDMA_2, },
+ { XFER_UDMA_1, },
+ { XFER_UDMA_0, },
+ { XFER_MW_DMA_2, },
+ { XFER_MW_DMA_1, },
+ { XFER_MW_DMA_0, },
+ { XFER_PIO_4, },
+ { XFER_PIO_3, },
+ { XFER_PIO_2, },
+ { XFER_PIO_1, },
+ { XFER_PIO_0, },
+ { 0, }
+};
+#endif
+#if 0
+struct chipset_bus_clock_list_entry sixty_six_base_hpt374[] = {
+ { XFER_UDMA_6, 0x12406231 }, /* checkme */
+ { XFER_UDMA_5, 0x12446231 },
+ 0x14846231
+ { XFER_UDMA_4, 0x16814ea7 },
+ 0x14886231
+ { XFER_UDMA_3, 0x16814ea7 },
+ 0x148c6231
+ { XFER_UDMA_2, 0x16814ea7 },
+ 0x148c6231
+ { XFER_UDMA_1, 0x16814ea7 },
+ 0x14906231
+ { XFER_UDMA_0, 0x16814ea7 },
+ 0x14986231
+ { XFER_MW_DMA_2, 0x16814ea7 },
+ 0x26514e21
+ { XFER_MW_DMA_1, 0x16814ea7 },
+ 0x26514e97
+ { XFER_MW_DMA_0, 0x16814ea7 },
+ 0x26514e97
+ { XFER_PIO_4, 0x06814ea7 },
+ 0x06514e21
+ { XFER_PIO_3, 0x06814ea7 },
+ 0x06514e22
+ { XFER_PIO_2, 0x06814ea7 },
+ 0x06514e33
+ { XFER_PIO_1, 0x06814ea7 },
+ 0x06914e43
+ { XFER_PIO_0, 0x06814ea7 },
+ 0x06914e57
+ { 0, 0x06814ea7 }
+};
+#endif
+
#define HPT366_DEBUG_DRIVE_INFO 0
#define HPT370_ALLOW_ATA100_5 1
#define HPT366_ALLOW_ATA66_4 1
@@ -347,6 +483,10 @@ static int n_hpt_devs;
static unsigned int pci_rev_check_hpt3xx(struct pci_dev *dev);
static unsigned int pci_rev2_check_hpt3xx(struct pci_dev *dev);
+static unsigned int pci_rev3_check_hpt3xx(struct pci_dev *dev);
+static unsigned int pci_rev5_check_hpt3xx(struct pci_dev *dev);
+static unsigned int pci_rev7_check_hpt3xx(struct pci_dev *dev);
+
byte hpt366_proc = 0;
byte hpt363_shared_irq;
byte hpt363_shared_pin;
@@ -360,11 +500,13 @@ extern char *ide_media_verbose(ide_drive
static int hpt366_get_info (char *buffer, char **addr, off_t offset, int count)
{
char *p = buffer;
- char *chipset_nums[] = {"366", "366", "368", "370", "370A"};
+ char *chipset_nums[] = {"366", "366", "368",
+ "370", "370A", "372",
+ "??", "374" };
int i;
p += sprintf(p, "\n "
- "HighPoint HPT366/368/370\n");
+ "HighPoint HPT366/368/370/372/374\n");
for (i = 0; i < n_hpt_devs; i++) {
struct pci_dev *dev = hpt_devs[i];
unsigned long iobase = dev->resource[4].start;
@@ -388,7 +530,7 @@ static int hpt366_get_info (char *buffer
(c0 & 0x80) ? "no" : "yes",
(c1 & 0x80) ? "no" : "yes");
- if (pci_rev_check_hpt3xx(dev)) {
+ if (pci_rev3_check_hpt3xx(dev)) {
u8 cbl;
cbl = inb_p(iobase + 0x7b);
outb_p(cbl | 1, iobase + 0x7b);
@@ -437,7 +579,19 @@ static int hpt366_get_info (char *buffer
}
#endif /* defined(DISPLAY_HPT366_TIMINGS) && defined(CONFIG_PROC_FS) */
-static unsigned int pci_rev_check_hpt3xx (struct pci_dev *dev)
+/*
+ * fixme: it really needs to be a switch.
+ */
+
+static unsigned int pci_rev2_check_hpt3xx (struct pci_dev *dev)
+{
+ unsigned int class_rev;
+ pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
+ class_rev &= 0xff;
+ return ((int) (class_rev > 0x01) ? 1 : 0);
+}
+
+static unsigned int pci_rev3_check_hpt3xx (struct pci_dev *dev)
{
unsigned int class_rev;
pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
@@ -445,12 +599,20 @@ static unsigned int pci_rev_check_hpt3xx
return ((int) (class_rev > 0x02) ? 1 : 0);
}
-static unsigned int pci_rev2_check_hpt3xx (struct pci_dev *dev)
+static unsigned int pci_rev5_check_hpt3xx (struct pci_dev *dev)
{
unsigned int class_rev;
pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
class_rev &= 0xff;
- return ((int) (class_rev > 0x01) ? 1 : 0);
+ return ((int) (class_rev > 0x04) ? 1 : 0);
+}
+
+static unsigned int pci_rev7_check_hpt3xx (struct pci_dev *dev)
+{
+ unsigned int class_rev;
+ pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
+ class_rev &= 0xff;
+ return ((int) (class_rev > 0x06) ? 1 : 0);
}
static int check_in_drive_lists (ide_drive_t *drive, const char **list)
@@ -484,6 +646,7 @@ static unsigned int pci_bus_clock_list (
static void hpt366_tune_chipset (ide_drive_t *drive, byte speed)
{
+ struct pci_dev *dev = HWIF(drive)->pci_dev;
byte regtime = (drive->select.b.unit & 0x01) ? 0x44 : 0x40;
byte regfast = (HWIF(drive)->channel) ? 0x55 : 0x51;
/*
@@ -497,30 +660,13 @@ static void hpt366_tune_chipset (ide_dri
/*
* Disable the "fast interrupt" prediction.
*/
- pci_read_config_byte(HWIF(drive)->pci_dev, regfast, &drive_fast);
+ pci_read_config_byte(dev, regfast, &drive_fast);
if (drive_fast & 0x02)
- pci_write_config_byte(HWIF(drive)->pci_dev, regfast, drive_fast & ~0x20);
+ pci_write_config_byte(dev, regfast, drive_fast & ~0x20);
- pci_read_config_dword(HWIF(drive)->pci_dev, regtime, ®1);
- /* detect bus speed by looking at control reg timing: */
- switch((reg1 >> 8) & 7) {
- case 5:
- reg2 = pci_bus_clock_list(speed, forty_base);
- break;
- case 9:
- reg2 = pci_bus_clock_list(speed, twenty_five_base);
- break;
- default:
- case 7:
- reg2 = pci_bus_clock_list(speed, thirty_three_base);
- break;
- }
-#if 0
- /* this is a nice idea ... */
- list_conf = pci_bus_clock_list(speed,
- (struct chipset_bus_clock_list_entry *)
- dev->sysdata);
-#endif
+ pci_read_config_dword(dev, regtime, ®1);
+ reg2 = pci_bus_clock_list(speed,
+ (struct chipset_bus_clock_list_entry *) dev->sysdata);
/*
* Disable on-chip PIO FIFO/buffer (to avoid problems handling I/O errors later)
*/
@@ -531,7 +677,12 @@ static void hpt366_tune_chipset (ide_dri
}
reg2 &= ~0x80000000;
- pci_write_config_dword(HWIF(drive)->pci_dev, regtime, reg2);
+ pci_write_config_dword(dev, regtime, reg2);
+}
+
+static void hpt368_tune_chipset (ide_drive_t *drive, byte speed)
+{
+ hpt366_tune_chipset(drive, speed);
}
static void hpt370_tune_chipset (ide_drive_t *drive, byte speed)
@@ -577,6 +728,39 @@ static void hpt370_tune_chipset (ide_dri
pci_write_config_dword(dev, drive_pci, list_conf);
}
+static void hpt372_tune_chipset (ide_drive_t *drive, byte speed)
+{
+ byte regfast = (HWIF(drive)->channel) ? 0x55 : 0x51;
+ unsigned int list_conf = 0;
+ unsigned int drive_conf = 0;
+ unsigned int conf_mask = (speed >= XFER_MW_DMA_0) ? 0xc0000000 : 0x30070000;
+ byte drive_pci = 0x40 + (drive->dn * 4);
+ byte drive_fast = 0;
+ struct pci_dev *dev = HWIF(drive)->pci_dev;
+
+ /*
+ * Disable the "fast interrupt" prediction.
+ * don't holdoff on interrupts. (== 0x01 despite what the docs say)
+ */
+ pci_read_config_byte(dev, regfast, &drive_fast);
+ drive_fast &= ~0x07;
+ pci_write_config_byte(HWIF(drive)->pci_dev, regfast, drive_fast);
+
+ list_conf = pci_bus_clock_list(speed,
+ (struct chipset_bus_clock_list_entry *)
+ dev->sysdata);
+ pci_read_config_dword(dev, drive_pci, &drive_conf);
+ list_conf = (list_conf & ~conf_mask) | (drive_conf & conf_mask);
+ if (speed < XFER_MW_DMA_0)
+ list_conf &= ~0x80000000; /* Disable on-chip PIO FIFO/buffer */
+ pci_write_config_dword(dev, drive_pci, list_conf);
+}
+
+static void hpt374_tune_chipset (ide_drive_t *drive, byte speed)
+{
+ hpt372_tune_chipset(drive, speed);
+}
+
static int hpt3xx_tune_chipset (ide_drive_t *drive, byte speed)
{
if ((drive->media != ide_disk) && (speed < XFER_SW_DMA_0))
@@ -585,9 +769,15 @@ static int hpt3xx_tune_chipset (ide_driv
if (!drive->init_speed)
drive->init_speed = speed;
- if (pci_rev_check_hpt3xx(HWIF(drive)->pci_dev)) {
+ if (pci_rev7_check_hpt3xx(HWIF(drive)->pci_dev)) {
+ hpt374_tune_chipset(drive, speed);
+ } else if (pci_rev5_check_hpt3xx(HWIF(drive)->pci_dev)) {
+ hpt372_tune_chipset(drive, speed);
+ } else if (pci_rev3_check_hpt3xx(HWIF(drive)->pci_dev)) {
hpt370_tune_chipset(drive, speed);
- } else {
+ } else if (pci_rev2_check_hpt3xx(HWIF(drive)->pci_dev)) {
+ hpt368_tune_chipset(drive, speed);
+ } else {
hpt366_tune_chipset(drive, speed);
}
drive->current_speed = speed;
@@ -664,13 +854,20 @@ static int config_chipset_for_dma (ide_d
byte ultra66 = eighty_ninty_three(drive);
int rval;
+ config_chipset_for_pio(drive);
+ drive->init_speed = 0;
+
if ((drive->media != ide_disk) && (speed < XFER_SW_DMA_0))
return ((int) ide_dma_off_quietly);
- if ((id->dma_ultra & 0x0020) &&
+ if ((id->dma_ultra & 0x0040) &&
+ (pci_rev5_check_hpt3xx(HWIF(drive)->pci_dev)) &&
+ (ultra66)) {
+ speed = XFER_UDMA_6;
+ } else if ((id->dma_ultra & 0x0020) &&
(!check_in_drive_lists(drive, bad_ata100_5)) &&
(HPT370_ALLOW_ATA100_5) &&
- (pci_rev_check_hpt3xx(HWIF(drive)->pci_dev)) &&
+ (pci_rev3_check_hpt3xx(HWIF(drive)->pci_dev)) &&
(ultra66)) {
speed = XFER_UDMA_5;
} else if ((id->dma_ultra & 0x0010) &&
@@ -703,7 +900,8 @@ static int config_chipset_for_dma (ide_d
(void) hpt3xx_tune_chipset(drive, speed);
- rval = (int)( ((id->dma_ultra >> 11) & 7) ? ide_dma_on :
+ rval = (int)( ((id->dma_ultra >> 14) & 3) ? ide_dma_on :
+ ((id->dma_ultra >> 11) & 7) ? ide_dma_on :
((id->dma_ultra >> 8) & 7) ? ide_dma_on :
((id->dma_mword >> 8) & 7) ? ide_dma_on :
ide_dma_off_quietly);
@@ -726,12 +924,14 @@ void hpt3xx_intrproc (ide_drive_t *drive
void hpt3xx_maskproc (ide_drive_t *drive, int mask)
{
+ struct pci_dev *dev = HWIF(drive)->pci_dev;
+
if (drive->quirk_list) {
- if (pci_rev_check_hpt3xx(HWIF(drive)->pci_dev)) {
+ if (pci_rev3_check_hpt3xx(dev)) {
byte reg5a = 0;
- pci_read_config_byte(HWIF(drive)->pci_dev, 0x5a, ®5a);
+ pci_read_config_byte(dev, 0x5a, ®5a);
if (((reg5a & 0x10) >> 4) != mask)
- pci_write_config_byte(HWIF(drive)->pci_dev, 0x5a, mask ? (reg5a | 0x10) : (reg5a & ~0x10));
+ pci_write_config_byte(dev, 0x5a, mask ? (reg5a | 0x10) : (reg5a & ~0x10));
} else {
if (mask) {
disable_irq(HWIF(drive)->irq);
@@ -758,7 +958,7 @@ static int config_drive_xfer_rate (ide_d
}
dma_func = ide_dma_off_quietly;
if (id->field_valid & 4) {
- if (id->dma_ultra & 0x002F) {
+ if (id->dma_ultra & 0x007F) {
/* Force if Capable UltraDMA */
dma_func = config_chipset_for_dma(drive);
if ((id->field_valid & 2) &&
@@ -889,6 +1089,43 @@ int hpt370_dmaproc (ide_dma_action_t fun
}
return ide_dmaproc(func, drive); /* use standard DMA stuff */
}
+
+int hpt374_dmaproc (ide_dma_action_t func, ide_drive_t *drive)
+{
+ struct pci_dev *dev = HWIF(drive)->pci_dev;
+ ide_hwif_t *hwif = HWIF(drive);
+ unsigned long dma_base = hwif->dma_base;
+ byte mscreg = hwif->channel ? 0x54 : 0x50;
+// byte reginfo = hwif->channel ? 0x56 : 0x52;
+ byte dma_stat;
+
+ switch (func) {
+ case ide_dma_check:
+ return config_drive_xfer_rate(drive);
+ case ide_dma_test_irq: /* returns 1 if dma irq issued, 0 otherwise */
+ dma_stat = inb(dma_base+2);
+#if 0 /* do not set unless you know what you are doing */
+ if (dma_stat & 4) {
+ byte stat = GET_STAT();
+ outb(dma_base+2, dma_stat & 0xE4);
+ }
+#endif
+ /* return 1 if INTR asserted */
+ return (dma_stat & 4) == 4;
+ case ide_dma_end:
+ {
+ byte bwsr_mask = hwif->channel ? 0x02 : 0x01;
+ byte bwsr_stat, msc_stat;
+ pci_read_config_byte(dev, 0x6a, &bwsr_stat);
+ pci_read_config_byte(dev, mscreg, &msc_stat);
+ if ((bwsr_stat & bwsr_mask) == bwsr_mask)
+ pci_write_config_byte(dev, mscreg, msc_stat|0x30);
+ }
+ default:
+ break;
+ }
+ return ide_dmaproc(func, drive); /* use standard DMA stuff */
+}
#endif /* CONFIG_BLK_DEV_IDEDMA */
/*
@@ -1006,7 +1243,7 @@ static int hpt370_busproc(ide_drive_t *
return 0;
}
-static void __init init_hpt370(struct pci_dev *dev)
+static void __init init_hpt37x(struct pci_dev *dev)
{
int adjust, i;
u16 freq;
@@ -1027,18 +1264,44 @@ static void __init init_hpt370(struct pc
freq &= 0x1FF;
if (freq < 0x9c) {
pll = F_LOW_PCI_33;
- dev->sysdata = (void *) thirty_three_base_hpt370;
- printk("HPT370: using 33MHz PCI clock\n");
+ if (pci_rev7_check_hpt3xx(dev)) {
+ dev->sysdata = (void *) thirty_three_base_hpt374;
+ } else if (pci_rev5_check_hpt3xx(dev)) {
+ dev->sysdata = (void *) thirty_three_base_hpt372;
+ } else if (dev->device == PCI_DEVICE_ID_TTI_HPT372) {
+ dev->sysdata = (void *) thirty_three_base_hpt372;
+ } else {
+ dev->sysdata = (void *) thirty_three_base_hpt370;
+ }
+ printk("HPT37X: using 33MHz PCI clock\n");
} else if (freq < 0xb0) {
pll = F_LOW_PCI_40;
} else if (freq < 0xc8) {
pll = F_LOW_PCI_50;
- dev->sysdata = (void *) fifty_base_hpt370;
- printk("HPT370: using 50MHz PCI clock\n");
+ if (pci_rev7_check_hpt3xx(dev)) {
+ // dev->sysdata = (void *) fifty_base_hpt374;
+ BUG();
+ } else if (pci_rev5_check_hpt3xx(dev)) {
+ dev->sysdata = (void *) fifty_base_hpt372;
+ } else if (dev->device == PCI_DEVICE_ID_TTI_HPT372) {
+ dev->sysdata = (void *) fifty_base_hpt372;
+ } else {
+ dev->sysdata = (void *) fifty_base_hpt370;
+ }
+ printk("HPT37X: using 50MHz PCI clock\n");
} else {
pll = F_LOW_PCI_66;
- dev->sysdata = (void *) sixty_six_base_hpt370;
- printk("HPT370: using 66MHz PCI clock\n");
+ if (pci_rev7_check_hpt3xx(dev)) {
+ // dev->sysdata = (void *) sixty_six_base_hpt374;
+ BUG();
+ } else if (pci_rev5_check_hpt3xx(dev)) {
+ dev->sysdata = (void *) sixty_six_base_hpt372;
+ } else if (dev->device == PCI_DEVICE_ID_TTI_HPT372) {
+ dev->sysdata = (void *) sixty_six_base_hpt372;
+ } else {
+ dev->sysdata = (void *) sixty_six_base_hpt370;
+ }
+ printk("HPT37X: using 66MHz PCI clock\n");
}
/*
@@ -1049,7 +1312,7 @@ static void __init init_hpt370(struct pc
* on PRST/SRST when the HPT state engine gets reset.
*/
if (dev->sysdata)
- goto init_hpt370_done;
+ goto init_hpt37X_done;
/*
* adjust PLL based upon PCI clock, enable it, and wait for
@@ -1076,9 +1339,18 @@ static void __init init_hpt370(struct pc
pci_write_config_dword(dev, 0x5c,
pll & ~0x100);
pci_write_config_byte(dev, 0x5b, 0x21);
- dev->sysdata = (void *) fifty_base_hpt370;
- printk("HPT370: using 50MHz internal PLL\n");
- goto init_hpt370_done;
+ if (pci_rev7_check_hpt3xx(dev)) {
+ // dev->sysdata = (void *) fifty_base_hpt374;
+ BUG();
+ } else if (pci_rev5_check_hpt3xx(dev)) {
+ dev->sysdata = (void *) fifty_base_hpt372;
+ } else if (dev->device == PCI_DEVICE_ID_TTI_HPT372) {
+ dev->sysdata = (void *) fifty_base_hpt372;
+ } else {
+ dev->sysdata = (void *) fifty_base_hpt370;
+ }
+ printk("HPT37X: using 50MHz internal PLL\n");
+ goto init_hpt37X_done;
}
}
pll_recal:
@@ -1088,13 +1360,41 @@ pll_recal:
pll += (adjust >> 1);
}
-init_hpt370_done:
+init_hpt37X_done:
/* reset state engine */
pci_write_config_byte(dev, 0x50, 0x37);
pci_write_config_byte(dev, 0x54, 0x37);
udelay(100);
}
+static void __init init_hpt366 (struct pci_dev *dev)
+{
+ unsigned int reg1 = 0;
+ byte drive_fast = 0;
+
+ /*
+ * Disable the "fast interrupt" prediction.
+ */
+ pci_read_config_byte(dev, 0x51, &drive_fast);
+ if (drive_fast & 0x80)
+ pci_write_config_byte(dev, 0x51, drive_fast & ~0x80);
+ pci_read_config_dword(dev, 0x40, ®1);
+
+ /* detect bus speed by looking at control reg timing: */
+ switch((reg1 >> 8) & 7) {
+ case 5:
+ dev->sysdata = (void *) forty_base_hpt366;
+ break;
+ case 9:
+ dev->sysdata = (void *) twenty_five_base_hpt366;
+ break;
+ case 7:
+ default:
+ dev->sysdata = (void *) thirty_three_base_hpt366;
+ break;
+ }
+}
+
unsigned int __init pci_init_hpt366 (struct pci_dev *dev, const char *name)
{
byte test = 0;
@@ -1118,20 +1418,14 @@ unsigned int __init pci_init_hpt366 (str
if (test != 0x08)
pci_write_config_byte(dev, PCI_MAX_LAT, 0x08);
- if (pci_rev_check_hpt3xx(dev)) {
- init_hpt370(dev);
+ if (pci_rev3_check_hpt3xx(dev)) {
+ init_hpt37x(dev);
hpt_devs[n_hpt_devs++] = dev;
} else {
+ init_hpt366(dev);
hpt_devs[n_hpt_devs++] = dev;
}
-#if defined(DISPLAY_HPT366_TIMINGS) && defined(CONFIG_PROC_FS)
- if (!hpt366_proc) {
- hpt366_proc = 1;
- hpt366_display_info = &hpt366_get_info;
- }
-#endif /* DISPLAY_HPT366_TIMINGS && CONFIG_PROC_FS */
-
return dev->irq;
}
@@ -1151,8 +1445,6 @@ unsigned int __init ata66_hpt366 (ide_hw
void __init ide_init_hpt366 (ide_hwif_t *hwif)
{
- int hpt_rev;
-
hwif->tuneproc = &hpt3xx_tune_drive;
hwif->speedproc = &hpt3xx_tune_chipset;
hwif->quirkproc = &hpt3xx_quirkproc;
@@ -1165,31 +1457,37 @@ void __init ide_init_hpt366 (ide_hwif_t
hwif->serialized = hwif->mate->serialized = 1;
#endif
- hpt_rev = pci_rev_check_hpt3xx(hwif->pci_dev);
- if (hpt_rev) {
- /* set up ioctl for power status. note: power affects both
- * drives on each channel */
- hwif->busproc = &hpt370_busproc;
- }
-
- if (pci_rev2_check_hpt3xx(hwif->pci_dev)) {
- /* do nothing now but will split device types */
- hwif->resetproc = &hpt3xx_reset;
-/*
- * don't do until we can parse out the cobalt box argh ...
- * hwif->busproc = &hpt3xx_tristate;
- */
- }
-
#ifdef CONFIG_BLK_DEV_IDEDMA
if (hwif->dma_base) {
- if (hpt_rev) {
+ if (pci_rev3_check_hpt3xx(hwif->pci_dev)) {
byte reg5ah = 0;
pci_read_config_byte(hwif->pci_dev, 0x5a, ®5ah);
if (reg5ah & 0x10) /* interrupt force enable */
pci_write_config_byte(hwif->pci_dev, 0x5a, reg5ah & ~0x10);
- hwif->dmaproc = &hpt370_dmaproc;
+ /*
+ * set up ioctl for power status.
+ * note: power affects both
+ * drives on each channel
+ */
+ hwif->resetproc = &hpt3xx_reset;
+ hwif->busproc = &hpt370_busproc;
+
+ if (pci_rev7_check_hpt3xx(hwif->pci_dev)) {
+ hwif->dmaproc = &hpt374_dmaproc;
+ } else if (pci_rev5_check_hpt3xx(hwif->pci_dev)) {
+ hwif->dmaproc = &hpt374_dmaproc;
+ } else if (hwif->pci_dev->device == PCI_DEVICE_ID_TTI_HPT372) {
+ hwif->dmaproc = &hpt374_dmaproc;
+ } else if (pci_rev3_check_hpt3xx(hwif->pci_dev)) {
+ hwif->dmaproc = &hpt370_dmaproc;
+ }
+ } else if (pci_rev2_check_hpt3xx(hwif->pci_dev)) {
+// hwif->resetproc = &hpt3xx_reset;
+// hwif->busproc = &hpt3xx_tristate;
+ hwif->dmaproc = &hpt366_dmaproc;
} else {
+// hwif->resetproc = &hpt3xx_reset;
+// hwif->busproc = &hpt3xx_tristate;
hwif->dmaproc = &hpt366_dmaproc;
}
if (!noautodma)
--- 24/drivers/ide/ide-pci.c~hpt374 Sat Dec 7 13:51:38 2002
+++ 24-akpm/drivers/ide/ide-pci.c Sat Dec 7 13:51:38 2002
@@ -79,6 +79,8 @@
#define DEVID_UM8886BF ((ide_pci_devid_t){PCI_VENDOR_ID_UMC, PCI_DEVICE_ID_UMC_UM8886BF})
#define DEVID_HPT34X ((ide_pci_devid_t){PCI_VENDOR_ID_TTI, PCI_DEVICE_ID_TTI_HPT343})
#define DEVID_HPT366 ((ide_pci_devid_t){PCI_VENDOR_ID_TTI, PCI_DEVICE_ID_TTI_HPT366})
+#define DEVID_HPT372 ((ide_pci_devid_t){PCI_VENDOR_ID_TTI, PCI_DEVICE_ID_TTI_HPT372})
+#define DEVID_HPT374 ((ide_pci_devid_t){PCI_VENDOR_ID_TTI, PCI_DEVICE_ID_TTI_HPT374})
#define DEVID_ALI15X3 ((ide_pci_devid_t){PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M5229})
#define DEVID_CY82C693 ((ide_pci_devid_t){PCI_VENDOR_ID_CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693})
#define DEVID_HINT ((ide_pci_devid_t){0x3388, 0x8013})
@@ -450,6 +452,13 @@ static ide_pci_device_t ide_pci_chipsets
{DEVID_UM8886BF,"UM8886BF", NULL, NULL, NULL, NULL, {{0x00,0x00,0x00}, {0x00,0x00,0x00}}, ON_BOARD, 0 },
{DEVID_HPT34X, "HPT34X", PCI_HPT34X, NULL, INIT_HPT34X, NULL, {{0x00,0x00,0x00}, {0x00,0x00,0x00}}, NEVER_BOARD, 16 },
{DEVID_HPT366, "HPT366", PCI_HPT366, ATA66_HPT366, INIT_HPT366, DMA_HPT366, {{0x00,0x00,0x00}, {0x00,0x00,0x00}}, OFF_BOARD, 240 },
+#if 1
+ {DEVID_HPT372, "HPT372", PCI_HPT366, ATA66_HPT366, INIT_HPT366, DMA_HPT366, {{0x00,0x00,0x00}, {0x00,0x00,0x00}}, OFF_BOARD, 0 },
+ {DEVID_HPT374, "HPT374", PCI_HPT366, ATA66_HPT366, INIT_HPT366, DMA_HPT366, {{0x00,0x00,0x00}, {0x00,0x00,0x00}}, OFF_BOARD, 0 },
+#else
+ {DEVID_HPT372, "HPT372", NULL, NULL, NULL, NULL, {{0x00,0x00,0x00}, {0x00,0x00,0x00}}, OFF_BOARD, 0 },
+ {DEVID_HPT374, "HPT374", NULL, NULL, NULL, NULL, {{0x00,0x00,0x00}, {0x00,0x00,0x00}}, OFF_BOARD, 0 },
+#endif
{DEVID_ALI15X3, "ALI15X3", PCI_ALI15X3, ATA66_ALI15X3, INIT_ALI15X3, DMA_ALI15X3, {{0x00,0x00,0x00}, {0x00,0x00,0x00}}, ON_BOARD, 0 },
{DEVID_CY82C693,"CY82C693", PCI_CY82C693, NULL, INIT_CY82C693, NULL, {{0x00,0x00,0x00}, {0x00,0x00,0x00}}, ON_BOARD, 0 },
{DEVID_HINT, "HINT_IDE", NULL, NULL, NULL, NULL, {{0x00,0x00,0x00}, {0x00,0x00,0x00}}, ON_BOARD, 0 },
@@ -474,6 +483,7 @@ static unsigned int __init ide_special_s
{
switch(dev->device) {
case PCI_DEVICE_ID_TTI_HPT366:
+ case PCI_DEVICE_ID_TTI_HPT374:
case PCI_DEVICE_ID_PROMISE_20246:
case PCI_DEVICE_ID_PROMISE_20262:
case PCI_DEVICE_ID_PROMISE_20265:
@@ -824,6 +834,7 @@ controller_ok:
IDE_PCI_DEVID_EQ(d->devid, DEVID_AEC6260R) ||
IDE_PCI_DEVID_EQ(d->devid, DEVID_HPT34X) ||
IDE_PCI_DEVID_EQ(d->devid, DEVID_HPT366) ||
+ IDE_PCI_DEVID_EQ(d->devid, DEVID_HPT374) ||
IDE_PCI_DEVID_EQ(d->devid, DEVID_CS5530) ||
IDE_PCI_DEVID_EQ(d->devid, DEVID_CY82C693) ||
IDE_PCI_DEVID_EQ(d->devid, DEVID_CMD646) ||
@@ -906,6 +917,44 @@ static void __init pdc20270_device_order
ide_setup_pci_device(dev2, d2);
}
+static void __init hpt374_device_order_fixup (struct pci_dev *dev, ide_pci_device_t *d)
+{
+ struct pci_dev *dev2 = NULL, *findev;
+ ide_pci_device_t *d2;
+
+ if (PCI_FUNC(dev->devfn) & 1)
+ return;
+
+ pci_for_each_dev(findev) {
+ if ((findev->vendor == dev->vendor) &&
+ (findev->device == dev->device) &&
+ ((findev->devfn - dev->devfn) == 1) &&
+ (PCI_FUNC(findev->devfn) & 1)) {
+ dev2 = findev;
+ break;
+ }
+ }
+
+ printk("%s: IDE controller on PCI bus %02x dev %02x\n", d->name, dev->bus->number, dev->devfn);
+ ide_setup_pci_device(dev, d);
+ if (!dev2) {
+ return;
+ } else {
+ byte irq = 0, irq2 = 0;
+ pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq);
+ pci_read_config_byte(dev2, PCI_INTERRUPT_LINE, &irq2);
+ if (irq != irq2) {
+ pci_write_config_byte(dev2, PCI_INTERRUPT_LINE, irq);
+ dev2->irq = dev->irq;
+ printk("%s: pci-config space interrupt fixed.\n", d->name);
+ }
+ }
+ d2 = d;
+ printk("%s: IDE controller on PCI bus %02x dev %02x\n", d2->name, dev2->bus->number, dev2->devfn);
+ ide_setup_pci_device(dev2, d2);
+
+}
+
static void __init hpt366_device_order_fixup (struct pci_dev *dev, ide_pci_device_t *d)
{
struct pci_dev *dev2 = NULL, *findev;
@@ -919,12 +968,11 @@ static void __init hpt366_device_order_f
pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
class_rev &= 0xff;
- if (class_rev > 5)
- class_rev = 5;
-
+
strcpy(d->name, chipset_names[class_rev]);
switch(class_rev) {
+ case 5:
case 4:
case 3: printk("%s: IDE controller on PCI bus %02x dev %02x\n", d->name, dev->bus->number, dev->devfn);
ide_setup_pci_device(dev, d);
@@ -944,11 +992,18 @@ static void __init hpt366_device_order_f
hpt363_shared_irq = (dev->irq == dev2->irq) ? 1 : 0;
if (hpt363_shared_pin && hpt363_shared_irq) {
d->bootable = ON_BOARD;
- printk("%s: onboard version of chipset, pin1=%d pin2=%d\n", d->name, pin1, pin2);
+ printk("%s: onboard version of chipset, "
+ "pin1=%d pin2=%d\n", d->name,
+ pin1, pin2);
#if 0
- /* I forgot why I did this once, but it fixed something. */
+ /*
+ * This is the third undocumented detection
+ * method and is generally required for the
+ * ABIT-BP6 boards.
+ */
pci_write_config_byte(dev2, PCI_INTERRUPT_PIN, dev->irq);
- printk("PCI: %s: Fixing interrupt %d pin %d to ZERO \n", d->name, dev2->irq, pin2);
+ printk("PCI: %s: Fixing interrupt %d pin %d "
+ "to ZERO \n", d->name, dev2->irq, pin2);
pci_write_config_byte(dev2, PCI_INTERRUPT_LINE, 0);
#endif
}
@@ -988,6 +1043,8 @@ void __init ide_scan_pcidev (struct pci_
return; /* UM8886A/BF pair */
else if (IDE_PCI_DEVID_EQ(d->devid, DEVID_HPT366))
hpt366_device_order_fixup(dev, d);
+ else if (IDE_PCI_DEVID_EQ(d->devid, DEVID_HPT374))
+ hpt374_device_order_fixup(dev, d);
else if (IDE_PCI_DEVID_EQ(d->devid, DEVID_PDC20270))
pdc20270_device_order_fixup(dev, d);
else if (!IDE_PCI_DEVID_EQ(d->devid, IDE_PCI_DEVID_NULL) || (dev->class >> 8) == PCI_CLASS_STORAGE_IDE) {
_
^ permalink raw reply [flat|nested] 7+ messages in thread