From: Nicolas ASPERT <Nicolas.Aspert@epfl.ch>
To: Margit Schubert-While <margitsw@t-online.de>
Cc: linux-kernel@vger.kernel.org, davej@suse.de, faith@redhat.com,
dri-devel@lists.sourceforge.net
Subject: Re: 2.4.20 AGP for I845 wrong ?
Date: Wed, 11 Dec 2002 13:07:45 +0100 [thread overview]
Message-ID: <3DF72A91.5080804@epfl.ch> (raw)
In-Reply-To: <fa.jjk71mv.1kja10g@ifi.uio.no>
[-- Attachment #1: Type: text/plain, Size: 912 bytes --]
Margit Schubert-While wrote:
> From drivers/char/agp/agpgart_be.c
> 4554,4559
> { PCI_DEVICE_ID_INTEL_845_G_0,
> PCI_VENDOR_ID_INTEL,
> INTEL_I845_G,
> "Intel",
> "i845G",
> intel_830mp_setup },
>
> Surely this is wrong or ?
> Should be "intel_845_setup", I think.
>
IIRC, the 845G is a "new" version of the 830MP chipset (it had been
added by Abraham vd Merwe & Graeme Fisher some months ago), but acts
basically just as the 830MP. Therefore the entry is correct.... Or maybe
if it gets confusing adding a comment would not hurt...
>
> Also in drivers/char/drm/drm_agpsupport.h, the switch statement at 262
> is missing the
> cases for INTEL_I830_M, INTEL_I845_G.
That's true. It is also missing in 2.5.51.
I attach two patches, one for 2.4.21-pre1 and one for 2.5.51 that should
fix this.
Regards
Nicolas.
[-- Attachment #2: intelchipset-id-2.4.21-pre1.diff --]
[-- Type: text/plain, Size: 848 bytes --]
diff -ru linux-2.4.21-pre1.clean/drivers/char/drm/drm_agpsupport.h linux-2.4.21-pre1/drivers/char/drm/drm_agpsupport.h
--- linux-2.4.21-pre1.clean/drivers/char/drm/drm_agpsupport.h Wed Dec 11 12:36:58 2002
+++ linux-2.4.21-pre1/drivers/char/drm/drm_agpsupport.h Wed Dec 11 12:42:34 2002
@@ -267,8 +267,10 @@
case INTEL_I810: head->chipset = "Intel i810"; break;
case INTEL_I815: head->chipset = "Intel i815"; break;
case INTEL_I820: head->chipset = "Intel i820"; break;
+ case INTEL_I830_M: head->chipset = "Intel i830M"; break;
case INTEL_I840: head->chipset = "Intel i840"; break;
case INTEL_I845: head->chipset = "Intel i845"; break;
+ case INTEL_I845_G: head->chipset = "Intel i845G"; break;
case INTEL_I850: head->chipset = "Intel i850"; break;
case VIA_GENERIC: head->chipset = "VIA"; break;
[-- Attachment #3: intelchipset-id-2.5.51.diff --]
[-- Type: text/plain, Size: 854 bytes --]
diff -ru linux-2.5.51.clean/drivers/char/drm/drm_agpsupport.h linux-2.5.51/drivers/char/drm/drm_agpsupport.h
--- linux-2.5.51.clean/drivers/char/drm/drm_agpsupport.h Tue Dec 10 03:45:39 2002
+++ linux-2.5.51/drivers/char/drm/drm_agpsupport.h Wed Dec 11 12:55:08 2002
@@ -271,10 +271,12 @@
#if LINUX_VERSION_CODE >= 0x02040f /* KERNEL_VERSION(2,4,15) */
case INTEL_I820: head->chipset = "Intel i820"; break;
#endif
+ case INTEL_I830_M: head->chipset = "Intel i830M"; break;
case INTEL_I840: head->chipset = "Intel i840"; break;
#if LINUX_VERSION_CODE >= 0x02040f /* KERNEL_VERSION(2,4,15) */
case INTEL_I845: head->chipset = "Intel i845"; break;
#endif
+ case INTEL_I845: head->chipset = "Intel i845G"; break;
case INTEL_I850: head->chipset = "Intel i850"; break;
case INTEL_460GX: head->chipset = "Intel 460GX"; break;
next parent reply other threads:[~2002-12-11 12:00 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <fa.jjk71mv.1kja10g@ifi.uio.no>
2002-12-11 12:07 ` Nicolas ASPERT [this message]
2002-12-11 12:20 ` 2.4.20 AGP for I845 wrong ? Dave Jones
2002-12-11 12:26 ` Nicolas ASPERT
2002-12-11 12:38 ` [Dri-devel] " Keith Whitwell
2002-12-11 12:45 ` Keith Whitwell
2002-12-11 13:05 ` Dave Jones
2002-12-11 13:40 ` Keith Whitwell
2002-12-12 1:58 ` David Dawes
2002-12-12 8:57 ` Nicolas ASPERT
2002-12-11 12:16 ` Nicolas ASPERT
2002-12-20 15:09 Margit Schubert-While
-- strict thread matches above, loose matches on Subject: below --
2002-12-10 18:42 Margit Schubert-While
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3DF72A91.5080804@epfl.ch \
--to=nicolas.aspert@epfl.ch \
--cc=davej@suse.de \
--cc=dri-devel@lists.sourceforge.net \
--cc=faith@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=margitsw@t-online.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox