From: Randy Broman <rbroman@bayarea.net>
To: John Bradford <john@grabjohn.com>
Cc: linux-kernel@vger.kernel.org, rbroman@bayarea.net
Subject: Re: RH73 Promise ATA/133 Install Problems
Date: Sat, 04 Jan 2003 11:31:05 -0800 [thread overview]
Message-ID: <3E173679.6050807@bayarea.net> (raw)
In-Reply-To: 200301041859.h04IxaGQ002334@darkstar.example.net
# lspci -v -v
00:0f.0 RAID bus controller: Promise Technology, Inc. PDC20276 IDE (rev
01) (prog-if 85)
Subsystem: Giga-byte Technology: Unknown device b001
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32 (1000ns min, 4500ns max), cache line size 08
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at e800 [size=8]
Region 1: I/O ports at e400 [size=4]
Region 2: I/O ports at e000 [size=8]
Region 3: I/O ports at dc00 [size=4]
Region 4: I/O ports at d800 [size=16]
Region 5: Memory at dffc000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [60] Power Management version 1
Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
John Bradford wrote:
>>I have a Gigabyte GA-7VRXP motherboard which has an on-board
>>Promise 20276 ATA133/RAID controller. I want to install RH73, on the
>>two ATA133 drives connected to the Promise controller. I've set up
>>the motherboard BIOS with the Promise 20276 interfaces as ATA (not
>>RAID), and I want to install on the two drives in a software RAID
>>configuration.
>>
>>If I start the standard RH73 install it does not identify the two drives
>>connected to the Promise interfaces.
>>
>
>Support for the Promise 20276 went in to the kernel at 2.4.19-pre6.
>
>Can you get to a command prompt and post the output of lspci -v -v?
>Maybe it has a non standard PCI id and is not being recognised.
>
>John.
>
next prev parent reply other threads:[~2003-01-04 19:20 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-01-04 18:52 RH73 Promise ATA/133 Install Problems Randy Broman
2003-01-04 18:59 ` John Bradford
2003-01-04 19:31 ` Randy Broman [this message]
2003-01-04 19:37 ` John Bradford
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3E173679.6050807@bayarea.net \
--to=rbroman@bayarea.net \
--cc=john@grabjohn.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox