* Re: [patch] Fix for ATAPI CD/DVD-ROMs and burners with vt8235 (and other chipsets)
2002-12-27 10:11 [patch] Fix for ATAPI CD/DVD-ROMs and burners with vt8235 (and other chipsets) Vojtech Pavlik
@ 2002-12-28 0:51 ` Alan Cox
2003-01-06 20:42 ` AnonimoVeneziano
` (3 subsequent siblings)
4 siblings, 0 replies; 7+ messages in thread
From: Alan Cox @ 2002-12-28 0:51 UTC (permalink / raw)
To: Vojtech Pavlik; +Cc: Linus Torvalds, Andre Hedrick, Marcelo Tosatti, LMKL
Fine with me.
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: [patch] Fix for ATAPI CD/DVD-ROMs and burners with vt8235 (and other chipsets)
2002-12-27 10:11 [patch] Fix for ATAPI CD/DVD-ROMs and burners with vt8235 (and other chipsets) Vojtech Pavlik
2002-12-28 0:51 ` Alan Cox
@ 2003-01-06 20:42 ` AnonimoVeneziano
2003-01-06 23:42 ` AnonimoVeneziano
` (2 subsequent siblings)
4 siblings, 0 replies; 7+ messages in thread
From: AnonimoVeneziano @ 2003-01-06 20:42 UTC (permalink / raw)
To: Vojtech Pavlik; +Cc: LMKL
Vojtech Pavlik wrote:
>Hi!
>
>Attached are two patches, one for recent 2.4 and one for 2.5, which
>enlarge the address setup timing for ATAPI devices. This is needed for
>several CD/DVD-ROMs and burners that won't work with standard timings.
>So far problems were reported only on vt8233a and vt8235, but I suppose
>other chipsets where the drivers actually program the address setup
>timing according to the spec can be affected.
>
>Please apply, thanks.
>
>
>
>------------------------------------------------------------------------
>
>You can import this changeset into BK by piping this whole message to:
>'| bk receive [path to repository]' or apply the patch as usual.
>
>===================================================================
>
>
>ChangeSet@1.897, 2002-12-27 10:59:52+01:00, vojtech@suse.cz
> Workaround (ide-timing.h) for many ATAPI CD/DVD-ROMs and burners.
> They need extended (beyond spec) address setup timing, and as such
> don't work on recent VIA chipsets.
>
>
> ide-timing.h | 8 ++++++++
> 1 files changed, 8 insertions(+)
>
>
>diff -Nru a/drivers/ide/ide-timing.h b/drivers/ide/ide-timing.h
>--- a/drivers/ide/ide-timing.h Fri Dec 27 11:00:15 2002
>+++ b/drivers/ide/ide-timing.h Fri Dec 27 11:00:15 2002
>@@ -245,6 +245,14 @@
> }
>
> /*
>+ * If the drive is an ATAPI device it may need slower address setup timing,
>+ * so we stay on the safe side.
>+ */
>+
>+ if (drive->media != ide_disk)
>+ p.setup = 120;
>+
>+/*
> * Convert the timing to bus clock counts.
> */
>
>
>===================================================================
>
>
>This BitKeeper patch contains the following changesets:
>+
>## Wrapped with gzip_uu ##
>
>
>begin 664 bkpatch2571
>M'XL(`*\D##X``^V476_3,!2&K^M?<=`NV`=-;.>S19U66@05H%5E&S=(R+-/
>ME]`FKF*WI2@_'J>MMFG:D(;@CB1*8N?X]3GO>90#N#18=5LK_=VBS,@!O-?&
>M=EMF:="3/]UXHK4;^YDNT-]'^=<SOQ"5Q+DF+F(LK,Q@A97IMI@7W,[8S0*[
>MK<G;=Y<?^Q-">CT89**\P<]HH=<C5E<K,5?F3-ALKDO/5J(T!5KA25W4MZ$U
>MIY2[,V))0*.X9C$-DUHRQ9@(&2K*PS0.2;:\R<Y<#KD5YA$!QGE">9#0J':/
>M(")#8%[:28!RGW&?)\!H-^IT(WY"69=2V)=ZMC<"3ABT*7D#?S?K`9$`7W0U
>M$Y5>E@H.<X5MFQ=Y>>-E1S#5%12BW$#_HC\>P6#H#Z^&[<GY)P/"15\OJ]*Y
>M[C4B%QENH$14@#\LELJ]'%[C1KLPLT!Y!$*I"HT!@W:Y@-T>K[8RPDTN7>^=
>MBM+E2PMKEQ#H$BJ46%JX&O5!9OG"K71[?0`>A`$9WS63M)]Y$$(%):>P:#!Y
>MW$A5Y0U0OO/#O^_)/5^C@"=NF,91':L8(Q&QSE3%`1?R8?=^+[=EHQ-UPK@.
>MXB1E6U2?6M&0^\_R)L_*FP:\P](PX&GMR`Z2+=/!0Z+#^"FBT_]$[XG>M?T<
>MVM5Z>SE$QT\2\`>XCWB80$K@&$93L!GNM"%OBMX[H7"52S=EG3W[LLU<K[%Z
>MO,Q&RVA8(QCKXEUIC:P14W=SR7KNNT^^DE8^A</M9NW3`E4NX$4/W/=O*C>S
>H(])J+;R=;`\8IZ_="O_X[I<N,Y0SLRQZBH5*1E-!?@&ZOKMG+P8`````
>`
>end
>
>
>------------------------------------------------------------------------
>
>You can import this changeset into BK by piping this whole message to:
>'| bk receive [path to repository]' or apply the patch as usual.
>
>===================================================================
>
>
>ChangeSet@1.957, 2002-12-27 10:46:29+01:00, vojtech@suse.cz
> Workaround (ide-timing.h) for many ATAPI CD/DVD-ROMs and burners.
> They need extended (beyond spec) address setup timing, and as such
> don't work on recent VIA chipsets.
>
>
> ide-timing.h | 8 ++++++++
> 1 files changed, 8 insertions(+)
>
>
>diff -Nru a/drivers/ide/ide-timing.h b/drivers/ide/ide-timing.h
>--- a/drivers/ide/ide-timing.h Fri Dec 27 10:47:10 2002
>+++ b/drivers/ide/ide-timing.h Fri Dec 27 10:47:10 2002
>@@ -245,6 +245,14 @@
> }
>
> /*
>+ * If the drive is an ATAPI device it may need slower address setup timing,
>+ * so we stay on the safe side.
>+ */
>+
>+ if (drive->media != ide_disk)
>+ p.setup = 120;
>+
>+/*
> * Convert the timing to bus clock counts.
> */
>
>
>===================================================================
>
>
>This BitKeeper patch contains the following changesets:
>+
>## Wrapped with gzip_uu ##
>
>
>begin 664 bkpatch1702
>M'XL(`)XA##X``[V46V_3,!3'G^M/<=`>V(4F=JY-4*>.%4$%:%79Q@L2<FUW
>M"6WC*G;:%>7#<])6&XP-,6Y)%,4^Y_Q]+C]E#RZ,*M/64G^V2F1D#UYK8].6
>MJ8QRQ!=<C[3&M9OIN7)W7NYXZL[RHC($[4-N109+59JTQ1S_9L>N%RIMC5Z^
>MNGA[,B*DVX73C!=7ZKVRT.T2J\LEGTG3XS:;Z<*Q)2_,7%GN"#VO;UQKCU(/
>M[Y#%/@VCFD4TB&O!)&,\8$I2+^A$`5GPI9KU*K'"G.\$,\^+6$(CG]9^%"<>
>MZ0-SDC`&ZKG,<[T8&$V#*/62(\I22F%79&_7`CABT*;D!?S=C$^)@`^ZG/)2
>M5X6$_5RJMLWG>7'E9`<PT27,>;&&D_.3X0!.^V[_LM\>G;TSP-%[7)4%-MQ!
>MC?-,K:%02H*ZMJJ0^+$_5FN-7F:AQ`%P*4ME#!AEJP5LCWBV4>&X6>',!4A=
>M/+6PPG1`%U`JH0H+EX,3$%F^P$`\Z0WX8=P)R/!VC*3]R(L0RBDY!GX]UJK7
>M%&&<ABMGJK">F2.GM2SS!B47V^%^VY)M5SLL8AZ-65B'":6T[HQID(1C7XQC
>MGD@QN3N[G\LA&3%-@C!(&C(Z;`/I0Q$-L_\L[S]7CFK/C_UX`[?W/=IA&CR(
>M=N<_H/V++-]#,NH\DN5[24:9'UC>S/L,VN5J\R";PP='_QN<#[P@A@Z!0QA,
>MP&9JJPUY4_*N#U(M<X%;%INSJ]O,]$J5]U?9:!D-*P7&HC\6U\@:/L$7)NN@
>MW24?22N?P/[FL/;Q7,F<PY,NH/V3S,WT@+1:"V<KVP7DYCE&N(>W?W&1*3$U
>2U;PKPTXH/"[)5_MR+Q\@!@``
>`
>end
>
>
Excuse me, which of those two is the patch for 2.4 kernels?
Bye
Marcello
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: [patch] Fix for ATAPI CD/DVD-ROMs and burners with vt8235 (and other chipsets)
2002-12-27 10:11 [patch] Fix for ATAPI CD/DVD-ROMs and burners with vt8235 (and other chipsets) Vojtech Pavlik
2002-12-28 0:51 ` Alan Cox
2003-01-06 20:42 ` AnonimoVeneziano
@ 2003-01-06 23:42 ` AnonimoVeneziano
2003-01-19 14:57 ` AnonimoVeneziano
2003-01-20 15:07 ` AnonimoVeneziano
4 siblings, 0 replies; 7+ messages in thread
From: AnonimoVeneziano @ 2003-01-06 23:42 UTC (permalink / raw)
To: Vojtech Pavlik; +Cc: LKML
Vojtech Pavlik wrote:
>Hi!
>
>Attached are two patches, one for recent 2.4 and one for 2.5, which
>enlarge the address setup timing for ATAPI devices. This is needed for
>several CD/DVD-ROMs and burners that won't work with standard timings.
>So far problems were reported only on vt8233a and vt8235, but I suppose
>other chipsets where the drivers actually program the address setup
>timing according to the spec can be affected.
>
>Please apply, thanks.
>
>
>
>------------------------------------------------------------------------
>
>You can import this changeset into BK by piping this whole message to:
>'| bk receive [path to repository]' or apply the patch as usual.
>
>===================================================================
>
>
>ChangeSet@1.897, 2002-12-27 10:59:52+01:00, vojtech@suse.cz
> Workaround (ide-timing.h) for many ATAPI CD/DVD-ROMs and burners.
> They need extended (beyond spec) address setup timing, and as such
> don't work on recent VIA chipsets.
>
>
> ide-timing.h | 8 ++++++++
> 1 files changed, 8 insertions(+)
>
>
>diff -Nru a/drivers/ide/ide-timing.h b/drivers/ide/ide-timing.h
>--- a/drivers/ide/ide-timing.h Fri Dec 27 11:00:15 2002
>+++ b/drivers/ide/ide-timing.h Fri Dec 27 11:00:15 2002
>@@ -245,6 +245,14 @@
> }
>
> /*
>+ * If the drive is an ATAPI device it may need slower address setup timing,
>+ * so we stay on the safe side.
>+ */
>+
>+ if (drive->media != ide_disk)
>+ p.setup = 120;
>+
>+/*
> * Convert the timing to bus clock counts.
> */
>
>
>===================================================================
>
>
>This BitKeeper patch contains the following changesets:
>+
>## Wrapped with gzip_uu ##
>
>
>begin 664 bkpatch2571
>M'XL(`*\D##X``^V476_3,!2&K^M?<=`NV`=-;.>S19U66@05H%5E&S=(R+-/
>ME]`FKF*WI2@_'J>MMFG:D(;@CB1*8N?X]3GO>90#N#18=5LK_=VBS,@!O-?&
>M=EMF:="3/]UXHK4;^YDNT-]'^=<SOQ"5Q+DF+F(LK,Q@A97IMI@7W,[8S0*[
>MK<G;=Y<?^Q-">CT89**\P<]HH=<C5E<K,5?F3-ALKDO/5J(T!5KA25W4MZ$U
>MIY2[,V))0*.X9C$-DUHRQ9@(&2K*PS0.2;:\R<Y<#KD5YA$!QGE">9#0J':/
>M(")#8%[:28!RGW&?)\!H-^IT(WY"69=2V)=ZMC<"3ABT*7D#?S?K`9$`7W0U
>M$Y5>E@H.<X5MFQ=Y>>-E1S#5%12BW$#_HC\>P6#H#Z^&[<GY)P/"15\OJ]*Y
>M[C4B%QENH$14@#\LELJ]'%[C1KLPLT!Y!$*I"HT!@W:Y@-T>K[8RPDTN7>^=
>MBM+E2PMKEQ#H$BJ46%JX&O5!9OG"K71[?0`>A`$9WS63M)]Y$$(%):>P:#!Y
>MW$A5Y0U0OO/#O^_)/5^C@"=NF,91':L8(Q&QSE3%`1?R8?=^+[=EHQ-UPK@.
>MXB1E6U2?6M&0^\_R)L_*FP:\P](PX&GMR`Z2+=/!0Z+#^"FBT_]$[XG>M?T<
>MVM5Z>SE$QT\2\`>XCWB80$K@&$93L!GNM"%OBMX[H7"52S=EG3W[LLU<K[%Z
>MO,Q&RVA8(QCKXEUIC:P14W=SR7KNNT^^DE8^A</M9NW3`E4NX$4/W/=O*C>S
>H(])J+;R=;`\8IZ_="O_X[I<N,Y0SLRQZBH5*1E-!?@&ZOKMG+P8`````
>`
>end
>
>
>------------------------------------------------------------------------
>
>You can import this changeset into BK by piping this whole message to:
>'| bk receive [path to repository]' or apply the patch as usual.
>
>===================================================================
>
>
>ChangeSet@1.957, 2002-12-27 10:46:29+01:00, vojtech@suse.cz
> Workaround (ide-timing.h) for many ATAPI CD/DVD-ROMs and burners.
> They need extended (beyond spec) address setup timing, and as such
> don't work on recent VIA chipsets.
>
>
> ide-timing.h | 8 ++++++++
> 1 files changed, 8 insertions(+)
>
>
>diff -Nru a/drivers/ide/ide-timing.h b/drivers/ide/ide-timing.h
>--- a/drivers/ide/ide-timing.h Fri Dec 27 10:47:10 2002
>+++ b/drivers/ide/ide-timing.h Fri Dec 27 10:47:10 2002
>@@ -245,6 +245,14 @@
> }
>
> /*
>+ * If the drive is an ATAPI device it may need slower address setup timing,
>+ * so we stay on the safe side.
>+ */
>+
>+ if (drive->media != ide_disk)
>+ p.setup = 120;
>+
>+/*
> * Convert the timing to bus clock counts.
> */
>
>
>===================================================================
>
>
>This BitKeeper patch contains the following changesets:
>+
>## Wrapped with gzip_uu ##
>
>
>begin 664 bkpatch1702
>M'XL(`)XA##X``[V46V_3,!3'G^M/<=`>V(4F=JY-4*>.%4$%:%79Q@L2<FUW
>M"6WC*G;:%>7#<])6&XP-,6Y)%,4^Y_Q]+C]E#RZ,*M/64G^V2F1D#UYK8].6
>MJ8QRQ!=<C[3&M9OIN7)W7NYXZL[RHC($[4-N109+59JTQ1S_9L>N%RIMC5Z^
>MNGA[,B*DVX73C!=7ZKVRT.T2J\LEGTG3XS:;Z<*Q)2_,7%GN"#VO;UQKCU(/
>M[Y#%/@VCFD4TB&O!)&,\8$I2+^A$`5GPI9KU*K'"G.\$,\^+6$(CG]9^%"<>
>MZ0-SDC`&ZKG,<[T8&$V#*/62(\I22F%79&_7`CABT*;D!?S=C$^)@`^ZG/)2
>M5X6$_5RJMLWG>7'E9`<PT27,>;&&D_.3X0!.^V[_LM\>G;TSP-%[7)4%-MQ!
>MC?-,K:%02H*ZMJJ0^+$_5FN-7F:AQ`%P*4ME#!AEJP5LCWBV4>&X6>',!4A=
>M/+6PPG1`%U`JH0H+EX,3$%F^P$`\Z0WX8=P)R/!VC*3]R(L0RBDY!GX]UJK7
>M%&&<ABMGJK">F2.GM2SS!B47V^%^VY)M5SLL8AZ-65B'":6T[HQID(1C7XQC
>MGD@QN3N[G\LA&3%-@C!(&C(Z;`/I0Q$-L_\L[S]7CFK/C_UX`[?W/=IA&CR(
>M=N<_H/V++-]#,NH\DN5[24:9'UC>S/L,VN5J\R";PP='_QN<#[P@A@Z!0QA,
>MP&9JJPUY4_*N#U(M<X%;%INSJ]O,]$J5]U?9:!D-*P7&HC\6U\@:/L$7)NN@
>MW24?22N?P/[FL/;Q7,F<PY,NH/V3S,WT@+1:"V<KVP7DYCE&N(>W?W&1*3$U
>2U;PKPTXH/"[)5_MR+Q\@!@``
>`
>end
>
>
Hi again :)
Excuse me for the disturb.
But I haven't understood very well the last 2 patches.
I haven't understood if these patches (vt8235-marcelo , vt8235-linus )
are stand alone patches , or them works with vt8235-atapi patch . Alone
this two patches (I've tried both) does not work , The problem persists.
Them are to use with the precedent patch?
Bye
Marcello
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: [patch] Fix for ATAPI CD/DVD-ROMs and burners with vt8235 (and other chipsets)
2002-12-27 10:11 [patch] Fix for ATAPI CD/DVD-ROMs and burners with vt8235 (and other chipsets) Vojtech Pavlik
` (2 preceding siblings ...)
2003-01-06 23:42 ` AnonimoVeneziano
@ 2003-01-19 14:57 ` AnonimoVeneziano
2003-01-20 15:07 ` AnonimoVeneziano
4 siblings, 0 replies; 7+ messages in thread
From: AnonimoVeneziano @ 2003-01-19 14:57 UTC (permalink / raw)
To: Vojtech Pavlik
Cc: Linus Torvalds, Alan Cox, Andre Hedrick, Marcelo Tosatti, LMKL
Vojtech Pavlik wrote:
>Hi!
>
>Attached are two patches, one for recent 2.4 and one for 2.5, which
>enlarge the address setup timing for ATAPI devices. This is needed for
>several CD/DVD-ROMs and burners that won't work with standard timings.
>So far problems were reported only on vt8233a and vt8235, but I suppose
>other chipsets where the drivers actually program the address setup
>timing according to the spec can be affected.
>
>Please apply, thanks.
>
>
>
>------------------------------------------------------------------------
>
>You can import this changeset into BK by piping this whole message to:
>'| bk receive [path to repository]' or apply the patch as usual.
>
>===================================================================
>
>
>ChangeSet@1.897, 2002-12-27 10:59:52+01:00, vojtech@suse.cz
> Workaround (ide-timing.h) for many ATAPI CD/DVD-ROMs and burners.
> They need extended (beyond spec) address setup timing, and as such
> don't work on recent VIA chipsets.
>
>
> ide-timing.h | 8 ++++++++
> 1 files changed, 8 insertions(+)
>
>
>diff -Nru a/drivers/ide/ide-timing.h b/drivers/ide/ide-timing.h
>--- a/drivers/ide/ide-timing.h Fri Dec 27 11:00:15 2002
>+++ b/drivers/ide/ide-timing.h Fri Dec 27 11:00:15 2002
>@@ -245,6 +245,14 @@
> }
>
> /*
>+ * If the drive is an ATAPI device it may need slower address setup timing,
>+ * so we stay on the safe side.
>+ */
>+
>+ if (drive->media != ide_disk)
>+ p.setup = 120;
>+
>+/*
> * Convert the timing to bus clock counts.
> */
>
>
>===================================================================
>
>
>This BitKeeper patch contains the following changesets:
>+
>## Wrapped with gzip_uu ##
>
>
>begin 664 bkpatch2571
>M'XL(`*\D##X``^V476_3,!2&K^M?<=`NV`=-;.>S19U66@05H%5E&S=(R+-/
>ME]`FKF*WI2@_'J>MMFG:D(;@CB1*8N?X]3GO>90#N#18=5LK_=VBS,@!O-?&
>M=EMF:="3/]UXHK4;^YDNT-]'^=<SOQ"5Q+DF+F(LK,Q@A97IMI@7W,[8S0*[
>MK<G;=Y<?^Q-">CT89**\P<]HH=<C5E<K,5?F3-ALKDO/5J(T!5KA25W4MZ$U
>MIY2[,V))0*.X9C$-DUHRQ9@(&2K*PS0.2;:\R<Y<#KD5YA$!QGE">9#0J':/
>M(")#8%[:28!RGW&?)\!H-^IT(WY"69=2V)=ZMC<"3ABT*7D#?S?K`9$`7W0U
>M$Y5>E@H.<X5MFQ=Y>>-E1S#5%12BW$#_HC\>P6#H#Z^&[<GY)P/"15\OJ]*Y
>M[C4B%QENH$14@#\LELJ]'%[C1KLPLT!Y!$*I"HT!@W:Y@-T>K[8RPDTN7>^=
>MBM+E2PMKEQ#H$BJ46%JX&O5!9OG"K71[?0`>A`$9WS63M)]Y$$(%):>P:#!Y
>MW$A5Y0U0OO/#O^_)/5^C@"=NF,91':L8(Q&QSE3%`1?R8?=^+[=EHQ-UPK@.
>MXB1E6U2?6M&0^\_R)L_*FP:\P](PX&GMR`Z2+=/!0Z+#^"FBT_]$[XG>M?T<
>MVM5Z>SE$QT\2\`>XCWB80$K@&$93L!GNM"%OBMX[H7"52S=EG3W[LLU<K[%Z
>MO,Q&RVA8(QCKXEUIC:P14W=SR7KNNT^^DE8^A</M9NW3`E4NX$4/W/=O*C>S
>H(])J+;R=;`\8IZ_="O_X[I<N,Y0SLRQZBH5*1E-!?@&ZOKMG+P8`````
>`
>end
>
>
>------------------------------------------------------------------------
>
>You can import this changeset into BK by piping this whole message to:
>'| bk receive [path to repository]' or apply the patch as usual.
>
>===================================================================
>
>
>ChangeSet@1.957, 2002-12-27 10:46:29+01:00, vojtech@suse.cz
> Workaround (ide-timing.h) for many ATAPI CD/DVD-ROMs and burners.
> They need extended (beyond spec) address setup timing, and as such
> don't work on recent VIA chipsets.
>
>
> ide-timing.h | 8 ++++++++
> 1 files changed, 8 insertions(+)
>
>
>diff -Nru a/drivers/ide/ide-timing.h b/drivers/ide/ide-timing.h
>--- a/drivers/ide/ide-timing.h Fri Dec 27 10:47:10 2002
>+++ b/drivers/ide/ide-timing.h Fri Dec 27 10:47:10 2002
>@@ -245,6 +245,14 @@
> }
>
> /*
>+ * If the drive is an ATAPI device it may need slower address setup timing,
>+ * so we stay on the safe side.
>+ */
>+
>+ if (drive->media != ide_disk)
>+ p.setup = 120;
>+
>+/*
> * Convert the timing to bus clock counts.
> */
>
>
>===================================================================
>
>
>This BitKeeper patch contains the following changesets:
>+
>## Wrapped with gzip_uu ##
>
>
>begin 664 bkpatch1702
>M'XL(`)XA##X``[V46V_3,!3'G^M/<=`>V(4F=JY-4*>.%4$%:%79Q@L2<FUW
>M"6WC*G;:%>7#<])6&XP-,6Y)%,4^Y_Q]+C]E#RZ,*M/64G^V2F1D#UYK8].6
>MJ8QRQ!=<C[3&M9OIN7)W7NYXZL[RHC($[4-N109+59JTQ1S_9L>N%RIMC5Z^
>MNGA[,B*DVX73C!=7ZKVRT.T2J\LEGTG3XS:;Z<*Q)2_,7%GN"#VO;UQKCU(/
>M[Y#%/@VCFD4TB&O!)&,\8$I2+^A$`5GPI9KU*K'"G.\$,\^+6$(CG]9^%"<>
>MZ0-SDC`&ZKG,<[T8&$V#*/62(\I22F%79&_7`CABT*;D!?S=C$^)@`^ZG/)2
>M5X6$_5RJMLWG>7'E9`<PT27,>;&&D_.3X0!.^V[_LM\>G;TSP-%[7)4%-MQ!
>MC?-,K:%02H*ZMJJ0^+$_5FN-7F:AQ`%P*4ME#!AEJP5LCWBV4>&X6>',!4A=
>M/+6PPG1`%U`JH0H+EX,3$%F^P$`\Z0WX8=P)R/!VC*3]R(L0RBDY!GX]UJK7
>M%&&<ABMGJK">F2.GM2SS!B47V^%^VY)M5SLL8AZ-65B'":6T[HQID(1C7XQC
>MGD@QN3N[G\LA&3%-@C!(&C(Z;`/I0Q$-L_\L[S]7CFK/C_UX`[?W/=IA&CR(
>M=N<_H/V++-]#,NH\DN5[24:9'UC>S/L,VN5J\R";PP='_QN<#[P@A@Z!0QA,
>MP&9JJPUY4_*N#U(M<X%;%INSJ]O,]$J5]U?9:!D-*P7&HC\6U\@:/L$7)NN@
>MW24?22N?P/[FL/;Q7,F<PY,NH/V3S,WT@+1:"V<KVP7DYCE&N(>W?W&1*3$U
>2U;PKPTXH/"[)5_MR+Q\@!@``
>`
>end
>
>
Mmmm, Why for me this two patches don't work?I've tried to apply
manually (as I've done for vt8235-atapi that works) and in automatic
way, but this doesn't work , are you sure that there isn't something
wrong? I've tried to increase the setup timing from 120 up to 400 but
this doesn't work too. It compiles but doesn't work.
Bye
Marcello
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: [patch] Fix for ATAPI CD/DVD-ROMs and burners with vt8235 (and other chipsets)
2002-12-27 10:11 [patch] Fix for ATAPI CD/DVD-ROMs and burners with vt8235 (and other chipsets) Vojtech Pavlik
` (3 preceding siblings ...)
2003-01-19 14:57 ` AnonimoVeneziano
@ 2003-01-20 15:07 ` AnonimoVeneziano
2003-01-25 12:02 ` Vojtech Pavlik
4 siblings, 1 reply; 7+ messages in thread
From: AnonimoVeneziano @ 2003-01-20 15:07 UTC (permalink / raw)
To: Vojtech Pavlik, LKML
I've tried to install 2.4.21-pre3-ac4, that should include these
patches, but this doesn't solve the problem as vt8235-atapi does.
So, please , if there is something wrong correct that.
Excuse me please.
Byez
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: [patch] Fix for ATAPI CD/DVD-ROMs and burners with vt8235 (and other chipsets)
2003-01-20 15:07 ` AnonimoVeneziano
@ 2003-01-25 12:02 ` Vojtech Pavlik
0 siblings, 0 replies; 7+ messages in thread
From: Vojtech Pavlik @ 2003-01-25 12:02 UTC (permalink / raw)
To: AnonimoVeneziano; +Cc: Vojtech Pavlik, LKML
On Mon, Jan 20, 2003 at 04:07:44PM +0100, AnonimoVeneziano wrote:
> I've tried to install 2.4.21-pre3-ac4, that should include these
> patches, but this doesn't solve the problem as vt8235-atapi does.
>
> So, please , if there is something wrong correct that.
>
> Excuse me please.
I'll send you a new experimental patch soon.
--
Vojtech Pavlik
SuSE Labs
^ permalink raw reply [flat|nested] 7+ messages in thread