* Re: Probably buggy MP Table and ACPI doesn't works
[not found] ` <200301251135.52356.bp@dynastytech.com>
@ 2003-01-25 18:04 ` AnonimoVeneziano
0 siblings, 0 replies; 4+ messages in thread
From: AnonimoVeneziano @ 2003-01-25 18:04 UTC (permalink / raw)
To: Bubba, LKML
Ooops , thank you very much! :-D
You are right!
Anyone have an idea about this?
Byez
Bubba wrote:
>fix your clock, last time i checked the month was january, not september.
>
>On Friday 12 September 2003 06:19, AnonimoVeneziano wrote:
>
>
>>Hi, I've compiled my kernel with Local APIC and IO-APIC function on a
>>UniProcessor system (MSI KT4 Ultra + Athlon 2400+) and at the system
>>start I see this (kernel 2.4.21-pre3-ac4 , but is similar with all the
>>kernels) :
>>
>>Linux version 2.4.21-pre3-ac4 (root@valinor) (gcc version 3.2.2 20030109
>>(Debian prerelease)) #1 ven set 12 00:56:30 CEST 2003
>>BIOS-provided physical RAM map:
>> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
>> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
>> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
>> BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
>> BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data)
>> BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS)
>> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
>> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
>> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>>511MB LOWMEM available.
>>found SMP MP-table at 000fb930
>>hm, page 000fb000 reserved twice.
>>hm, page 000fc000 reserved twice.
>>hm, page 000f6000 reserved twice.
>>hm, page 000f7000 reserved twice.
>>On node 0 totalpages: 131056
>>zone(0): 4096 pages.
>>zone(1): 126960 pages.
>>zone(2): 0 pages.
>>Intel MultiProcessor Specification v1.4
>> Virtual Wire compatibility mode.
>>OEM ID: VIA Product ID: VT5440B APIC at: 0xFEE00000
>>Processor #0 Pentium(tm) Pro APIC version 17
>>I/O APIC #2 Version 3 at 0xFEC00000.
>>Enabling APIC mode: Flat. Using 1 I/O APICs
>>Processors: 1
>>Kernel command line: auto BOOT_IMAGE=Linux ro root=305
>>video=vesa:ywrap,mtrr Initializing CPU#0
>>Detected 2000.130 MHz processor.
>>Console: colour dummy device 80x25
>>Calibrating delay loop... 3984.58 BogoMIPS
>>Memory: 516224k/524224k available (1192k kernel code, 7612k reserved,
>>412k data, 104k init, 0k highmem)
>>Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
>>Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
>>Mount cache hash table entries: 512 (order: 0, 4096 bytes)
>>Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
>>Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
>>CPU: CLK_CTL MSR was 6003d22f. Reprogramming to 2003d22f
>>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>>CPU: L2 Cache: 256K (64 bytes/line)
>>Intel machine check architecture supported.
>>Intel machine check reporting enabled on CPU#0.
>>CPU: After generic, caps: 0383fbff c1c3fbff 00000000 00000000
>>CPU: Common caps: 0383fbff c1c3fbff 00000000 00000000
>>CPU: AMD Athlon(tm) XP 2400+ stepping 01
>>Enabling fast FPU save and restore... done.
>>Enabling unmasked SIMD FPU exception support... done.
>>Checking 'hlt' instruction... OK.
>>POSIX conformance testing by UNIFIX
>>enabled ExtINT on CPU#0
>>ESR value before enabling vector: 00000080
>>ESR value after enabling vector: 00000000
>>ENABLING IO-APIC IRQs
>>Setting 2 in the phys_id_present_map
>>...changing IO-APIC physical APIC ID to 2 ... ok.
>>init IO_APIC IRQs
>> IO-APIC (apicid-pin) 2-0, 2-5, 2-9, 2-10, 2-11, 2-17, 2-18, 2-20, 2-22,
>>2-23 not connected.
>>..TIMER: vector=0x31 pin1=2 pin2=0
>>number of MP IRQ sources: 19.
>>number of IO-APIC #2 registers: 24.
>>testing the IO APIC.......................
>>
>>IO APIC #2......
>>.... register #00: 02000000
>>....... : physical APIC id: 02
>>.... register #01: 00178003
>>....... : max redirection entries: 0017
>>....... : PRQ implemented: 1
>>....... : IO APIC version: 0003
>>An unexpected IO-APIC was found. If this kernel release is less than
>>three months old please report this to linux-smp@vger.kernel.org
>>.... IRQ redirection table:
>> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
>> 00 000 00 1 0 0 0 0 0 0 00
>> 01 001 01 0 0 0 0 0 1 1 39
>> 02 001 01 0 0 0 0 0 1 1 31
>> 03 001 01 0 0 0 0 0 1 1 41
>> 04 001 01 0 0 0 0 0 1 1 49
>> 05 000 00 1 0 0 0 0 0 0 00
>> 06 001 01 0 0 0 0 0 1 1 51
>> 07 001 01 0 0 0 0 0 1 1 59
>> 08 001 01 0 0 0 0 0 1 1 61
>> 09 000 00 1 0 0 0 0 0 0 00
>> 0a 000 00 1 0 0 0 0 0 0 00
>> 0b 000 00 1 0 0 0 0 0 0 00
>> 0c 001 01 0 0 0 0 0 1 1 69
>> 0d 001 01 0 0 0 0 0 1 1 71
>> 0e 001 01 0 0 0 0 0 1 1 79
>> 0f 001 01 0 0 0 0 0 1 1 81
>> 10 001 01 1 1 0 1 0 1 1 89
>> 11 000 00 1 0 0 0 0 0 0 00
>> 12 000 00 1 0 0 0 0 0 0 00
>> 13 001 01 1 1 0 1 0 1 1 91
>> 14 000 00 1 0 0 0 0 0 0 00
>> 15 001 01 1 1 0 1 0 1 1 99
>> 16 000 00 1 0 0 0 0 0 0 00
>> 17 000 00 1 0 0 0 0 0 0 00
>>IRQ to pin mappings:
>>IRQ0 -> 0:2
>>IRQ1 -> 0:1
>>IRQ3 -> 0:3
>>IRQ4 -> 0:4
>>IRQ6 -> 0:6
>>IRQ7 -> 0:7
>>IRQ8 -> 0:8
>>IRQ12 -> 0:12
>>IRQ13 -> 0:13
>>IRQ14 -> 0:14
>>IRQ15 -> 0:15
>>IRQ16 -> 0:16
>>IRQ19 -> 0:19
>>IRQ21 -> 0:21
>>.................................... done.
>>Using local APIC timer interrupts.
>>calibrating APIC timer ...
>>..... CPU clock speed is 2000.2553 MHz.
>>..... host bus clock speed is 266.7008 MHz.
>>cpu: 0, clocks: 2667008, slice: 1333504
>>CPU0<T0:2667008,T1:1333504,D:0,S:1333504,C:2667008>
>>mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
>>mtrr: detected mtrr type: Intel
>>PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1
>>PCI: Using configuration type 1
>>PCI: Probing PCI hardware
>>PCI: Using IRQ router default [1106/3177] at 00:11.0
>>PCI->APIC IRQ transform: (B0,I7,P0) -> 19
>>PCI->APIC IRQ transform: (B0,I12,P0) -> 16
>>PCI->APIC IRQ transform: (B0,I16,P0) -> 21
>>PCI->APIC IRQ transform: (B0,I16,P1) -> 21
>>PCI->APIC IRQ transform: (B0,I16,P2) -> 21
>>PCI->APIC IRQ transform: (B0,I16,P3) -> 21
>>PCI->APIC IRQ transform: (B1,I0,P0) -> 16
>>PCI: Via IRQ fixup for 00:10.2, from 10 to 5
>>PCI: Via IRQ fixup for 00:10.0, from 11 to 5
>>PnPBIOS: Found PnP BIOS installation structure at 0xc00f79a0
>>PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x686b, dseg 0xf0000
>>PnPBIOS: 14 nodes reported by PnP BIOS; 14 recorded by driver
>>Linux NET4.0 for Linux 2.4
>>Based upon Swansea University Computer Society NET3.039
>>Initializing RT netlink socket
>>Starting kswapd
>>devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
>>devfs: boot_options: 0x1
>>ACPI: Core Subsystem version [20011018]
>>ACPI: Subsystem enabled
>>vesafb: framebuffer at 0xd8000000, mapped to 0xe0807000, size 65536k
>>vesafb: mode is 1024x768x32, linelength=4096, pages=1
>>vesafb: protected mode interface info at c000:b7d0
>>vesafb: pmi: set display start = c00cb815, set palette = c00cb89a
>>vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce
>>3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
>>vesafb: scrolling: ywrap using protected mode interface, yres_virtual=16384
>>vesafb: directcolor: size=8:8:8:8, shift=24:16:8:0
>>Console: switching to colour frame buffer device 128x48
>>fb0: VESA VGA frame buffer device
>>pty: 256 Unix98 ptys configured
>>Real Time Clock Driver v1.10e
>>Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4
>>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>>VP_IDE: IDE controller at PCI slot 00:11.1
>>PCI: No IRQ known for interrupt pin A of device 00:11.1. Probably buggy
>>MP table.
>>VP_IDE: chipset revision 6
>>VP_IDE: not 100% native mode: will probe irqs later
>>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>>VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci00:11.1
>> ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA
>> ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA
>>hda: QUANTUM FIREBALLP AS30.0, ATA DISK drive
>>hdb: MAXTOR 6L060J3, ATA DISK drive
>>hda: DMA disabled
>>blk: queue c02d8860, I/O limit 4095Mb (mask 0xffffffff)
>>hdb: DMA disabled
>>blk: queue c02d899c, I/O limit 4095Mb (mask 0xffffffff)
>>hdc: _NEC DV-5800A, ATAPI CD/DVD-ROM drive
>>hdd: Hewlett-Packard CD-Writer Plus 8100, ATAPI CD/DVD-ROM drive
>>hdc: DMA disabled
>>hdd: DMA disabled
>>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>>ide1 at 0x170-0x177,0x376 on irq 15
>>hda: host protected area => 1
>>hda: 58633344 sectors (30020 MB) w/1902KiB Cache, CHS=3649/255/63,
>>UDMA(100) hdb: host protected area => 1
>>hdb: 117266688 sectors (60041 MB) w/1819KiB Cache, CHS=7299/255/63,
>>UDMA(133)
>>Partition check:
>> /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 p7 p8 >
>> /dev/ide/host0/bus0/target1/lun0: p1 p2 p3 < p5 > p4
>>NET4: Linux TCP/IP 1.0 for NET4.0
>>IP Protocols: ICMP, UDP, TCP, IGMP
>>IP: routing cache hash table of 4096 buckets, 32Kbytes
>>TCP: Hash tables configured (established 32768 bind 65536)
>>reiserfs: checking transaction log (device 03:05) ...
>>Using r5 hash to sort names
>>ReiserFS version 3.6.25
>>VFS: Mounted root (reiserfs filesystem) readonly.
>>Mounted devfs on /dev
>>Freeing unused kernel memory: 104k freed
>>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
>>Adding Swap: 506036k swap-space (priority -1)
>>Adding Swap: 506036k swap-space (priority -2)
>>IA-32 Microcode Update Driver: v1.11 <tigran@veritas.com>
>>i2c-core.o: i2c core module
>>8139too Fast Ethernet driver 0.9.26
>>eth0: RealTek RTL8139 Fast Ethernet at 0xe4952f00, 00:40:f4:55:a1:40, IRQ
>>19 eth0: Identified 8139 chip type 'RTL-8139C'
>>Power Resource: found
>>Power Resource: found
>>Power Resource: found
>>Power Resource: found
>>ACPI: Power Button (FF) found
>>ACPI: Multiple power buttons detected, ignoring fixed-feature
>>ACPI: Power Button (CM) found
>>ACPI: Sleep Button (CM) found
>>ACPI: System firmware supports S0 S1 S4 S5
>>Processor[0]: C0 C1, 8 throttling states
>>Non-volatile memory driver v1.2
>>SCSI subsystem driver Revision: 1.00
>>scsi0 : SCSI host adapter emulation for IDE ATAPI devices
>> Vendor: _NEC Model: DV-5800A Rev: 1.90
>> Type: CD-ROM ANSI SCSI revision: 02
>> Vendor: HP Model: CD-Writer+ 8100 Rev: 1.0g
>> Type: CD-ROM ANSI SCSI revision: 02
>>cmpci: version $Revision: 5.64 $ time 01:00:52 Sep 12 2003
>>cmpci: found CM8738 adapter at io 0xe800 irq 16
>>cmpci: chip version = 055
>>cmpci: Inverse SPDIF-in
>>cmpci: Enable SPDIF loop
>>arp_tables: (C) 2002 David S. Miller
>>ip_conntrack version 2.1 (4095 buckets, 32760 max) - 292 bytes per
>>conntrack ip_tables: (C) 2000-2002 Netfilter core team
>>ASSERT ip_conntrack_core.c:624 &ip_conntrack_lock not readlocked
>>ASSERT ip_conntrack_core.c:624 &ip_conntrack_lock not readlocked
>>parport0: PC-style at 0x378 (0x778) [PCSPP(,...)]
>>parport0: irq 7
>>ide: no cache flush required.
>>ide: no cache flush required.
>>ide: no cache flush required.
>>ide: no cache flush required.
>>isapnp: Scanning for PnP cards...
>>isapnp: No Plug & Play device found
>>Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ
>>SERIAL_PCI ISAPNP enabled
>>ttyS00 at 0x03f8 (irq = 4) is a 16550A
>>ttyS01 at 0x02f8 (irq = 3) is a 16550A
>>reiserfs: checking transaction log (device 03:01) ...
>>Using r5 hash to sort names
>>ReiserFS version 3.6.25
>>reiserfs: checking transaction log (device 03:06) ...
>>Using r5 hash to sort names
>>ReiserFS version 3.6.25
>>reiserfs: checking transaction log (device 03:07) ...
>>Using r5 hash to sort names
>>ReiserFS version 3.6.25
>>reiserfs: checking transaction log (device 03:08) ...
>>Using r5 hash to sort names
>>ReiserFS version 3.6.25
>>Journalled Block Device driver loaded
>>kjournald starting. Commit interval 5 seconds
>>EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,68), internal journal
>>EXT3-fs: mounted filesystem with ordered data mode.
>>kjournald starting. Commit interval 5 seconds
>>EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,69), internal journal
>>EXT3-fs: mounted filesystem with ordered data mode.
>>ide: no cache flush required.
>>ide: no cache flush required.
>>eth0: Setting half-duplex based on auto-negotiated partner ability 0000.
>> detected
>>
>>What does mean buggy MP table on device 00.11.1 ?? (That is the IDE
>>controller I think) In my bios I can select 1.4. and 1.1. MPS table,
>>I've tried both but the situation doesn't change. This messsage is
>>appeared recently , with the bios upgrade from 1.1 to 1.3. Doing lspci
>>-vvvxxx I've noticed that the IRQ of 00.11.1 is routed to IRQ 0 .
>>
>>And there is another problem. With IO-APIC activated in the kernel ACPI
>>works in a strange way. I can't shutdown the system by pressing the
>> On/Off button, and when I do "shutdown -h now" the system instead to
>>halt it reboots . I hear the HD that are Off, but the fans and the PSU
>>remain Switch On, after few seconds the HDs switch on again and the
>>system restarts. Why??
>>
>>If I disable IO-APIC and use Local APIC only ACPI works correctly, but I
>>recive the message "spurious 8259A interrupt: IRQ7" during the boot or
>>few time later after the boot. Should I disable APIC at all?? This
>>problem of ACPI is present with 1.1 bios too
>>
>>Thanks
>>
>>Bye
>>
>>Marcello
>>
>>
>>
>>-
>>To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
>>the body of a message to majordomo@vger.kernel.org
>>More majordomo info at http://vger.kernel.org/majordomo-info.html
>>Please read the FAQ at http://www.tux.org/lkml/
>>
>>
>
>
>
>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Probably buggy MP Table and ACPI doesn't works
@ 2003-01-25 19:41 Manfred Spraul
0 siblings, 0 replies; 4+ messages in thread
From: Manfred Spraul @ 2003-01-25 19:41 UTC (permalink / raw)
To: AnonimoVeneziano; +Cc: linux-kernel
Which problems do you have at runtime? Do all ide disk work?
I.e. do you have problems with ide, or is the reporting wrong?
Legacy ide always uses irq 14 and 15, it could be overeager error
detection that notices that unused fields in the pci configuration data
contain odd values.
Could you add lspci -vxxx -s 00:11.1?
--
Manfred
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Probably buggy MP Table and ACPI doesn't works
@ 2003-01-28 21:46 AnonimoVeneziano
0 siblings, 0 replies; 4+ messages in thread
From: AnonimoVeneziano @ 2003-01-28 21:46 UTC (permalink / raw)
To: LKML, Manfred Spraul
Manfred Spraul wrote:
> Which problems do you have at runtime? Do all ide disk work?
>
> I.e. do you have problems with ide, or is the reporting wrong?
> Legacy ide always uses irq 14 and 15, it could be overeager error
> detection that notices that unused fields in the pci configuration
> data contain odd values.
>
> Could you add lspci -vxxx -s 00:11.1?
>
> --
> Manfred
>
>
>
>
hi, here my lspci -vvvxx
You have any ideas?
Thanks Bye
00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400 AGP] Host Bridge
Subsystem: VIA Technologies, Inc.: Unknown device 0000
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 8
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=256M]
Capabilities: <available only to root>
00: 06 11 89 31 06 00 30 22 00 00 00 06 00 08 00 00
10: 08 00 00 e0 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 06 11 00 00
30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00
00:01.0 PCI bridge: VIA Technologies, Inc. VT8235 PCI Bridge (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: dde00000-dfefffff
Prefetchable memory behind bridge: d5c00000-ddcfffff
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
Capabilities: <available only to root>
00: 06 11 68 b1 07 01 30 22 00 00 04 06 00 00 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 00 f0 00 00 00
20: e0 dd e0 df c0 d5 c0 dd 00 00 00 00 00 00 00 00
30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 0c 00
00:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RT8139
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 128 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at ec00 [size=256]
Region 1: Memory at dfffff00 (32-bit, non-prefetchable) [size=256]
Capabilities: <available only to root>
00: ec 10 39 81 07 00 90 02 10 00 00 02 00 80 00 00
10: 01 ec 00 00 00 ff ff df 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 ec 10 39 81
30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 20 40
00:0c.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev
10)
Subsystem: Micro-star International Co Ltd: Unknown device 5900
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 128 (500ns min, 6000ns max)
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at e800 [size=256]
Capabilities: <available only to root>
00: f6 13 11 01 05 00 10 02 10 00 01 04 00 80 00 00
10: 01 e8 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 00 59
30: 00 00 00 00 c0 00 00 00 00 00 00 00 0b 01 02 18
00:10.0 USB Controller: VIA Technologies, Inc. USB (rev 80) (prog-if 00
[UHCI])
Subsystem: VIA Technologies, Inc. USB
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 128, cache line size 08
Interrupt: pin A routed to IRQ 21
Region 4: I/O ports at dc00 [size=32]
Capabilities: <available only to root>
00: 06 11 38 30 17 00 10 02 80 00 03 0c 08 80 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 dc 00 00 00 00 00 00 00 00 00 00 06 11 38 30
30: 00 00 00 00 80 00 00 00 00 00 00 00 05 01 00 00
00:10.1 USB Controller: VIA Technologies, Inc. USB (rev 80) (prog-if 00
[UHCI])
Subsystem: VIA Technologies, Inc. USB
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 128, cache line size 08
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at e000 [size=32]
Capabilities: <available only to root>
00: 06 11 38 30 17 00 10 02 80 00 03 0c 08 80 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 e0 00 00 00 00 00 00 00 00 00 00 06 11 38 30
30: 00 00 00 00 80 00 00 00 00 00 00 00 05 02 00 00
00:10.2 USB Controller: VIA Technologies, Inc. USB (rev 80) (prog-if 00
[UHCI])
Subsystem: VIA Technologies, Inc. USB
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 128, cache line size 08
Interrupt: pin C routed to IRQ 21
Region 4: I/O ports at e400 [size=32]
Capabilities: <available only to root>
00: 06 11 38 30 17 00 10 02 80 00 03 0c 08 80 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 e4 00 00 00 00 00 00 00 00 00 00 06 11 38 30
30: 00 00 00 00 80 00 00 00 00 00 00 00 05 03 00 00
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82) (prog-if
20 [EHCI])
Subsystem: VIA Technologies, Inc. USB 2.0
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 128, cache line size 08
Interrupt: pin D routed to IRQ 21
Region 0: Memory at dffffe00 (32-bit, non-prefetchable) [size=256]
Capabilities: <available only to root>
00: 06 11 04 31 17 00 10 02 82 20 03 0c 08 80 00 00
10: 00 fe ff df 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 06 11 04 31
30: 00 00 00 00 80 00 00 00 00 00 00 00 0a 04 00 00
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
Subsystem: VIA Technologies, Inc.: Unknown device 0000
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: <available only to root>
00: 06 11 77 31 87 00 10 02 00 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 06 11 00 00
30: 00 00 00 00 c0 00 00 00 00 00 00 00 00 00 00 00
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586/B/686A/B PIPC Bus
Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: VIA Technologies, Inc. VT8235 Bus Master ATA133/100/66/33 IDE
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 0
Region 4: I/O ports at fc00 [size=16]
Capabilities: <available only to root>
00: 06 11 71 05 07 00 90 02 06 8a 01 01 00 20 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 fc 00 00 00 00 00 00 00 00 00 00 06 11 71 05
30: 00 00 00 00 c0 00 00 00 00 00 00 00 ff 01 00 00
01:00.0 VGA compatible controller: nVidia Corporation NV20 [GeForce3
Ti200] (rev a3) (prog-if 00 [VGA])
Subsystem: Micro-star International Co Ltd: Unknown device 5105
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 128 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 16
Region 0: Memory at de000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d8000000 (32-bit, prefetchable) [size=64M]
Region 2: Memory at ddc80000 (32-bit, prefetchable) [size=512K]
Expansion ROM at dfef0000 [disabled] [size=64K]
Capabilities: <available only to root>
00: de 10 01 02 07 00 b0 02 a3 00 00 03 00 80 00 00
10: 00 00 00 de 08 00 00 d8 08 00 c8 dd 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 05 51
30: 00 00 ef df 60 00 00 00 00 00 00 00 0b 01 05 01
^ permalink raw reply [flat|nested] 4+ messages in thread
* Probably buggy MP Table and ACPI doesn't works
@ 2003-09-12 11:19 AnonimoVeneziano
[not found] ` <200301251135.52356.bp@dynastytech.com>
0 siblings, 1 reply; 4+ messages in thread
From: AnonimoVeneziano @ 2003-09-12 11:19 UTC (permalink / raw)
To: LKML
Hi, I've compiled my kernel with Local APIC and IO-APIC function on a
UniProcessor system (MSI KT4 Ultra + Athlon 2400+) and at the system
start I see this (kernel 2.4.21-pre3-ac4 , but is similar with all the
kernels) :
Linux version 2.4.21-pre3-ac4 (root@valinor) (gcc version 3.2.2 20030109
(Debian prerelease)) #1 ven set 12 00:56:30 CEST 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data)
BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
511MB LOWMEM available.
found SMP MP-table at 000fb930
hm, page 000fb000 reserved twice.
hm, page 000fc000 reserved twice.
hm, page 000f6000 reserved twice.
hm, page 000f7000 reserved twice.
On node 0 totalpages: 131056
zone(0): 4096 pages.
zone(1): 126960 pages.
zone(2): 0 pages.
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: VIA Product ID: VT5440B APIC at: 0xFEE00000
Processor #0 Pentium(tm) Pro APIC version 17
I/O APIC #2 Version 3 at 0xFEC00000.
Enabling APIC mode: Flat. Using 1 I/O APICs
Processors: 1
Kernel command line: auto BOOT_IMAGE=Linux ro root=305 video=vesa:ywrap,mtrr
Initializing CPU#0
Detected 2000.130 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 3984.58 BogoMIPS
Memory: 516224k/524224k available (1192k kernel code, 7612k reserved,
412k data, 104k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: CLK_CTL MSR was 6003d22f. Reprogramming to 2003d22f
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: Common caps: 0383fbff c1c3fbff 00000000 00000000
CPU: AMD Athlon(tm) XP 2400+ stepping 01
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000080
ESR value after enabling vector: 00000000
ENABLING IO-APIC IRQs
Setting 2 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 2 ... ok.
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-5, 2-9, 2-10, 2-11, 2-17, 2-18, 2-20, 2-22,
2-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 19.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
.... register #01: 00178003
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0003
An unexpected IO-APIC was found. If this kernel release is less than
three months old please report this to linux-smp@vger.kernel.org
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 001 01 0 0 0 0 0 1 1 39
02 001 01 0 0 0 0 0 1 1 31
03 001 01 0 0 0 0 0 1 1 41
04 001 01 0 0 0 0 0 1 1 49
05 000 00 1 0 0 0 0 0 0 00
06 001 01 0 0 0 0 0 1 1 51
07 001 01 0 0 0 0 0 1 1 59
08 001 01 0 0 0 0 0 1 1 61
09 000 00 1 0 0 0 0 0 0 00
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 001 01 0 0 0 0 0 1 1 69
0d 001 01 0 0 0 0 0 1 1 71
0e 001 01 0 0 0 0 0 1 1 79
0f 001 01 0 0 0 0 0 1 1 81
10 001 01 1 1 0 1 0 1 1 89
11 000 00 1 0 0 0 0 0 0 00
12 000 00 1 0 0 0 0 0 0 00
13 001 01 1 1 0 1 0 1 1 91
14 000 00 1 0 0 0 0 0 0 00
15 001 01 1 1 0 1 0 1 1 99
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ19 -> 0:19
IRQ21 -> 0:21
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 2000.2553 MHz.
..... host bus clock speed is 266.7008 MHz.
cpu: 0, clocks: 2667008, slice: 1333504
CPU0<T0:2667008,T1:1333504,D:0,S:1333504,C:2667008>
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router default [1106/3177] at 00:11.0
PCI->APIC IRQ transform: (B0,I7,P0) -> 19
PCI->APIC IRQ transform: (B0,I12,P0) -> 16
PCI->APIC IRQ transform: (B0,I16,P0) -> 21
PCI->APIC IRQ transform: (B0,I16,P1) -> 21
PCI->APIC IRQ transform: (B0,I16,P2) -> 21
PCI->APIC IRQ transform: (B0,I16,P3) -> 21
PCI->APIC IRQ transform: (B1,I0,P0) -> 16
PCI: Via IRQ fixup for 00:10.2, from 10 to 5
PCI: Via IRQ fixup for 00:10.0, from 11 to 5
PnPBIOS: Found PnP BIOS installation structure at 0xc00f79a0
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x686b, dseg 0xf0000
PnPBIOS: 14 nodes reported by PnP BIOS; 14 recorded by driver
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
ACPI: Core Subsystem version [20011018]
ACPI: Subsystem enabled
vesafb: framebuffer at 0xd8000000, mapped to 0xe0807000, size 65536k
vesafb: mode is 1024x768x32, linelength=4096, pages=1
vesafb: protected mode interface info at c000:b7d0
vesafb: pmi: set display start = c00cb815, set palette = c00cb89a
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce
3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
vesafb: scrolling: ywrap using protected mode interface, yres_virtual=16384
vesafb: directcolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.10e
Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 00:11.1
PCI: No IRQ known for interrupt pin A of device 00:11.1. Probably buggy
MP table.
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci00:11.1
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA
hda: QUANTUM FIREBALLP AS30.0, ATA DISK drive
hdb: MAXTOR 6L060J3, ATA DISK drive
hda: DMA disabled
blk: queue c02d8860, I/O limit 4095Mb (mask 0xffffffff)
hdb: DMA disabled
blk: queue c02d899c, I/O limit 4095Mb (mask 0xffffffff)
hdc: _NEC DV-5800A, ATAPI CD/DVD-ROM drive
hdd: Hewlett-Packard CD-Writer Plus 8100, ATAPI CD/DVD-ROM drive
hdc: DMA disabled
hdd: DMA disabled
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: host protected area => 1
hda: 58633344 sectors (30020 MB) w/1902KiB Cache, CHS=3649/255/63, UDMA(100)
hdb: host protected area => 1
hdb: 117266688 sectors (60041 MB) w/1819KiB Cache, CHS=7299/255/63,
UDMA(133)
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 p7 p8 >
/dev/ide/host0/bus0/target1/lun0: p1 p2 p3 < p5 > p4
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
reiserfs: checking transaction log (device 03:05) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
VFS: Mounted root (reiserfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 104k freed
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Adding Swap: 506036k swap-space (priority -1)
Adding Swap: 506036k swap-space (priority -2)
IA-32 Microcode Update Driver: v1.11 <tigran@veritas.com>
i2c-core.o: i2c core module
8139too Fast Ethernet driver 0.9.26
eth0: RealTek RTL8139 Fast Ethernet at 0xe4952f00, 00:40:f4:55:a1:40, IRQ 19
eth0: Identified 8139 chip type 'RTL-8139C'
Power Resource: found
Power Resource: found
Power Resource: found
Power Resource: found
ACPI: Power Button (FF) found
ACPI: Multiple power buttons detected, ignoring fixed-feature
ACPI: Power Button (CM) found
ACPI: Sleep Button (CM) found
ACPI: System firmware supports S0 S1 S4 S5
Processor[0]: C0 C1, 8 throttling states
Non-volatile memory driver v1.2
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: _NEC Model: DV-5800A Rev: 1.90
Type: CD-ROM ANSI SCSI revision: 02
Vendor: HP Model: CD-Writer+ 8100 Rev: 1.0g
Type: CD-ROM ANSI SCSI revision: 02
cmpci: version $Revision: 5.64 $ time 01:00:52 Sep 12 2003
cmpci: found CM8738 adapter at io 0xe800 irq 16
cmpci: chip version = 055
cmpci: Inverse SPDIF-in
cmpci: Enable SPDIF loop
arp_tables: (C) 2002 David S. Miller
ip_conntrack version 2.1 (4095 buckets, 32760 max) - 292 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ASSERT ip_conntrack_core.c:624 &ip_conntrack_lock not readlocked
ASSERT ip_conntrack_core.c:624 &ip_conntrack_lock not readlocked
parport0: PC-style at 0x378 (0x778) [PCSPP(,...)]
parport0: irq 7
ide: no cache flush required.
ide: no cache flush required.
ide: no cache flush required.
ide: no cache flush required.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ
SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
reiserfs: checking transaction log (device 03:01) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
reiserfs: checking transaction log (device 03:06) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
reiserfs: checking transaction log (device 03:07) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
reiserfs: checking transaction log (device 03:08) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,68), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,69), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ide: no cache flush required.
ide: no cache flush required.
eth0: Setting half-duplex based on auto-negotiated partner ability 0000.
detected
What does mean buggy MP table on device 00.11.1 ?? (That is the IDE
controller I think) In my bios I can select 1.4. and 1.1. MPS table,
I've tried both but the situation doesn't change. This messsage is
appeared recently , with the bios upgrade from 1.1 to 1.3. Doing lspci
-vvvxxx I've noticed that the IRQ of 00.11.1 is routed to IRQ 0 .
And there is another problem. With IO-APIC activated in the kernel ACPI
works in a strange way. I can't shutdown the system by pressing the
On/Off button, and when I do "shutdown -h now" the system instead to
halt it reboots . I hear the HD that are Off, but the fans and the PSU
remain Switch On, after few seconds the HDs switch on again and the
system restarts. Why??
If I disable IO-APIC and use Local APIC only ACPI works correctly, but I
recive the message "spurious 8259A interrupt: IRQ7" during the boot or
few time later after the boot. Should I disable APIC at all?? This
problem of ACPI is present with 1.1 bios too
Thanks
Bye
Marcello
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2003-01-28 21:36 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-01-28 21:46 Probably buggy MP Table and ACPI doesn't works AnonimoVeneziano
-- strict thread matches above, loose matches on Subject: below --
2003-09-12 11:19 AnonimoVeneziano
[not found] ` <200301251135.52356.bp@dynastytech.com>
2003-01-25 18:04 ` AnonimoVeneziano
2003-01-25 19:41 Manfred Spraul
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox