From: Brad Laue <brad@brad-x.com>
To: linux-kernel@vger.kernel.org
Subject: airo.o + kfree_skb crash - 2.4.20
Date: Sat, 01 Mar 2003 12:48:30 -0500 [thread overview]
Message-ID: <3E60F26E.5000402@brad-x.com> (raw)
Using the kernel PCMCIA and airo.o module. This occurred after 90
minutes of use, where the card was streaming under a megabit of traffic
at all times. Lost control of everything but video and the USB bus.
Cisco AiroNet 350 card. Several protocols in use at the time including
HTTP/SSH/NFS.
Linux Odyssey.brad-x.com 2.4.20 #10 Fri Feb 28 10:57:59 EST 2003 i686
KSymoops:
Feb 28 11:01:15 Odyssey kernel: cs: IO port probe 0x0a00-0x0aff: clean.
Feb 28 11:01:15 Odyssey kernel: ac97_codec: AC97 Audio codec, id:
\203\204v9(SigmaTel STAC9721/23)
Feb 28 14:59:22 Odyssey kernel: cs: memory probe 0xa0000000-0xa0ffffff:
clean.
Feb 28 16:16:08 Odyssey kernel: Warning: kfree_skb passed an skb still
on a list (from c01201ba).
Feb 28 16:16:08 Odyssey kernel: kernel BUG at skbuff.c:315!
Feb 28 16:16:08 Odyssey kernel: invalid operand: 0000
Feb 28 16:16:08 Odyssey kernel: CPU: 0
Feb 28 16:16:08 Odyssey kernel: EIP: 0010:[start_request+164/528]
Tainted: P
Feb 28 16:16:08 Odyssey kernel: EIP: 0010:[<c01dca24>] Tainted: P
Using defaults from ksymoops -t elf32-i386 -a i386
Feb 28 16:16:08 Odyssey kernel: EFLAGS: 00010286
Feb 28 16:16:08 Odyssey kernel: eax: 00000045 ebx: c8c504a0 ecx:
cec36000
edx: cec37f7c
Feb 28 16:16:08 Odyssey kernel: esi: c12f1f84 edi: 00000000 ebp:
c12f0000
esp: c12f1f6c
Feb 28 16:16:08 Odyssey kernel: ds: 0018 es: 0018 ss: 0018
Feb 28 16:16:08 Odyssey kernel: Process keventd (pid: 2, stackpage=c12f1000)
Feb 28 16:16:08 Odyssey kernel: Stack: c0244620 c01201ba 00000000
c12f1f84 c01201ba c8c504a0 ca2dc2e4 ca2dc2e4
Feb 28 16:16:08 Odyssey kernel: 00000000 00000000 c0128df3
c0256d70 c12f1fb0 00000000 c12f0560 c12f0570
Feb 28 16:16:08 Odyssey kernel: c12f0000 00000001 00000000
c0253fa0 00010000 00000000 00000700 c0128cc0
Feb 28 16:16:08 Odyssey kernel: Call Trace:
[sys_old_getrlimit+42/224] [sys_old_getrlimit+42/224]
[vmalloc_area_pages+243/368] [vmfree_area_pages+320/384] [rest_init+0/40]
Feb 28 16:16:08 Odyssey kernel: Call Trace: [<c01201ba>] [<c01201ba>]
[<c0128df3>] [<c0128cc0>] [<c0105000>]
Feb 28 16:16:08 Odyssey kernel: [<c01057ce>] [<c0128cc0>]
Feb 28 16:16:08 Odyssey kernel: Code: 0f 0b 3b 01 b1 38 24 c0 8b 5c 24
14 e9 0e
ff ff ff 8d 74 26
>>EIP; c01dca24 <__kfree_skb+f4/110> <=====
>>ebx; c8c504a0 <___strtok+897dc6c/1062382c>
>>ecx; cec36000 <___strtok+e9637cc/1062382c>
>>edx; cec37f7c <___strtok+e965748/1062382c>
>>esi; c12f1f84 <___strtok+101f750/1062382c>
>>ebp; c12f0000 <___strtok+101d7cc/1062382c>
>>esp; c12f1f6c <___strtok+101f738/1062382c>
Trace; c01201ba <__run_task_queue+5a/140>
Trace; c01201ba <__run_task_queue+5a/140>
Trace; c0128df3 <schedule_task+1a3/230>
Trace; c0128cc0 <schedule_task+70/230>
Trace; c0105000 <empty_zero_page+1000/1380>
Trace; c01057ce <kernel_thread+2e/240>
Trace; c0128cc0 <schedule_task+70/230>
Code; c01dca24 <__kfree_skb+f4/110>
00000000 <_EIP>:
Code; c01dca24 <__kfree_skb+f4/110> <=====
0: 0f 0b ud2a <=====
Code; c01dca26 <__kfree_skb+f6/110>
2: 3b 01 cmp (%ecx),%eax
Code; c01dca28 <__kfree_skb+f8/110>
4: b1 38 mov $0x38,%cl
Code; c01dca2a <__kfree_skb+fa/110>
6: 24 c0 and $0xc0,%al
Code; c01dca2c <__kfree_skb+fc/110>
8: 8b 5c 24 14 mov 0x14(%esp,1),%ebx
Code; c01dca30 <__kfree_skb+100/110>
c: e9 0e ff ff ff jmp ffffff1f <_EIP+0xffffff1f>
Code; c01dca35 <__kfree_skb+105/110>
11: 8d 74 26 00 lea 0x0(%esi,1),%esi
--
// -- http://www.BRAD-X.com/ -- //
next reply other threads:[~2003-03-01 17:38 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-03-01 17:48 Brad Laue [this message]
-- strict thread matches above, loose matches on Subject: below --
2003-02-10 11:53 Cisco Aironet 340 oops with 2.4.20 Marc Giger
2003-03-01 17:14 ` airo.o + kfree_skb crash - 2.4.20 Brad Laue
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3E60F26E.5000402@brad-x.com \
--to=brad@brad-x.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox