From: Douglas Gilbert <dougg@torque.net>
To: linux-kernel@vger.kernel.org, jim_jim33@hotmail.com
Subject: Re: USB Mass Storage Device
Date: Sun, 13 Apr 2003 09:25:04 +1000 [thread overview]
Message-ID: <3E98A050.2090005@torque.net> (raw)
Jim Bean wrote:
> The following USB Mass Storage device is found during bootup:
>
> scsi0 : SCSI emulation for USB
> Mass Storage devices
> Vendor: SOYO Model: USB Storage-SMC Rev: 0214
> Type: Direct-Access ANSI SCSI revision: 02
> Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
>
> Is it a CompactFlash reader that plugs directly into a USB1 header
> on my motherboard.
> /sys/bus/scsi/devices/0:0:0:0/* contains information regarding
> the device, however there is nothing
> /dev/scsi/host0/bus0/target0/lun0 for me to mount, regardless
> of whether there is a card in the drive or not. I have
> hotplug enables, and inserting a card in the drive does not
> generate any new messages under dmesg (although verbosity
> stuff is not enabled). Is this device not yet supported,
> or am I missing something that I need to enable?
Jim,
Have a look in /var/log/messages for errors coming from the
sd driver (e.g. it could be stuck on a READ CAPACITY or MODE
SENSE command). Other than that it could be a problem with
devfs. You could make a temporary device node (e.g.
'cd /root; mknod my_sda b 8 0') then try fdisk on my_sda.
Doug Gilbert
next reply other threads:[~2003-04-12 23:12 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-04-12 23:25 Douglas Gilbert [this message]
2003-04-13 0:00 ` USB Mass Storage Device Robert Love
-- strict thread matches above, loose matches on Subject: below --
2003-04-12 18:18 jim beam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3E98A050.2090005@torque.net \
--to=dougg@torque.net \
--cc=jim_jim33@hotmail.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox