From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S262706AbTDRB7J (ORCPT ); Thu, 17 Apr 2003 21:59:09 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S262749AbTDRB7J (ORCPT ); Thu, 17 Apr 2003 21:59:09 -0400 Received: from parcelfarce.linux.theplanet.co.uk ([195.92.249.252]:21471 "EHLO www.linux.org.uk") by vger.kernel.org with ESMTP id S262706AbTDRB7I (ORCPT ); Thu, 17 Apr 2003 21:59:08 -0400 Message-ID: <3E9F5EAD.2070006@pobox.com> Date: Thu, 17 Apr 2003 22:10:53 -0400 From: Jeff Garzik Organization: none User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.2.1) Gecko/20021213 Debian/1.2.1-2.bunk X-Accept-Language: en MIME-Version: 1.0 To: LKML Subject: My P3 runs at.... zero Mhz (bug rpt) Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Just booted into 2.5.67-BK-latest (plus my __builtin_memcpy patch). Everything seems to be running just fine, so naturally one must nitpick little things like being told my CPU is running at 0.000 Mhz. :) 2.4.x reports the Mhz correctly. I don't recall if 2.5.x did in the past, but can check if needed. sh-2.05b$ cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 7 model name : Pentium III (Katmai) stepping : 3 cpu MHz : 0.000 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr sse bogomips : 494.59 Selected dmesg bits: Calibrating delay loop... 494.59 BogoMIPS Memory: 644596k/655296k available (2192k kernel code, 9960k reserved, 694k data, 296k init, 0k highmem) CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K CPU serial number disabled. CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: Intel Pentium III (Katmai) stepping 03 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. IA-32 Microcode Update Driver: v1.11 Enabling SEP on CPU 0