From: Jeff Muizelaar <muizelaar@rogers.com>
To: Jeff Garzik <jgarzik@pobox.com>
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: [PATCH 1/4] NE2000 driver updates
Date: Thu, 01 May 2003 12:58:42 -0400 [thread overview]
Message-ID: <3EB15242.4060105@rogers.com> (raw)
In-Reply-To: <3EB15127.2060409@rogers.com>
[-- Attachment #1: Type: text/plain, Size: 1 bytes --]
[-- Attachment #2: ne-pnp.patch --]
[-- Type: text/plain, Size: 6847 bytes --]
--- linux-2.5.66/drivers/net/ne.c 2003-03-24 17:00:21.000000000 -0500
+++ linux-2.5.66-nepnp/drivers/net/ne.c 2003-03-29 21:39:17.000000000 -0500
@@ -29,21 +29,20 @@
last in cleanup_modue()
Richard Guenther : Added support for ISAPnP cards
Paul Gortmaker : Discontinued PCI support - use ne2k-pci.c instead.
+ Jeff Muizelaar : moved over to generic PnP api
*/
/* Routines for the NatSemi-based designs (NE[12]000). */
-static const char version1[] =
-"ne.c:v1.10 9/23/94 Donald Becker (becker@scyld.com)\n";
-static const char version2[] =
-"Last modified Nov 1, 2000 by Paul Gortmaker\n";
+static const char version[] =
+"ne.c:v1.10a 1/26/03 Donald Becker (becker@scyld.com)\n";
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
-#include <linux/isapnp.h>
+#include <linux/pnp.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
@@ -76,20 +75,18 @@
};
#endif
-static struct isapnp_device_id isapnp_clone_list[] __initdata = {
- { ISAPNP_CARD_ID('A','X','E',0x2011),
- ISAPNP_VENDOR('A','X','E'), ISAPNP_FUNCTION(0x2011),
- (long) "NetGear EA201" },
- { ISAPNP_ANY_ID, ISAPNP_ANY_ID,
- ISAPNP_VENDOR('E','D','I'), ISAPNP_FUNCTION(0x0216),
- (long) "NN NE2000" },
- { ISAPNP_ANY_ID, ISAPNP_ANY_ID,
- ISAPNP_VENDOR('P','N','P'), ISAPNP_FUNCTION(0x80d6),
- (long) "Generic PNP" },
- { } /* terminate list */
+#ifdef CONFIG_PNP
+static const struct pnp_device_id ne_pnp_table[] = {
+ /* NetGear EA201 */
+ {.id = "AXE2011", .driver_data = 0},
+ /* NN NE2000 */
+ {.id = "EDI0216", .driver_data = 0},
+ /* NE2000 Compatible */
+ {.id = "PNP80d6", .driver_data = 0},
};
-MODULE_DEVICE_TABLE(isapnp, isapnp_clone_list);
+MODULE_DEVICE_TABLE(pnp, ne_pnp_table);
+#endif
#ifdef SUPPORT_NE_BAD_CLONES
/* A list of bad clones that we none-the-less recognize. */
@@ -126,9 +123,20 @@
#define NESM_START_PG 0x40 /* First page of TX buffer */
#define NESM_STOP_PG 0x80 /* Last page +1 of RX ring */
+#ifdef CONFIG_PNP
+static int ne_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id);
+static void ne_pnp_remove(struct pnp_dev *dev);
+
+static struct pnp_driver ne_pnp_driver = {
+ .name = "ne",
+ .id_table = ne_pnp_table,
+ .probe = ne_pnp_probe,
+ .remove = ne_pnp_remove,
+};
+#endif
+
int ne_probe(struct net_device *dev);
static int ne_probe1(struct net_device *dev, int ioaddr);
-static int ne_probe_isapnp(struct net_device *dev);
static int ne_open(struct net_device *dev);
static int ne_close(struct net_device *dev);
@@ -175,10 +183,6 @@
else if (base_addr != 0) /* Don't probe at all. */
return -ENXIO;
- /* Then look for any installed ISAPnP clones */
- if (isapnp_present() && (ne_probe_isapnp(dev) == 0))
- return 0;
-
#ifndef MODULE
/* Last resort. The semi-risky ISA auto-probe. */
for (base_addr = 0; netcard_portlist[base_addr] != 0; base_addr++) {
@@ -191,50 +195,58 @@
return -ENODEV;
}
-static int __init ne_probe_isapnp(struct net_device *dev)
+#ifdef CONFIG_PNP
+static int ne_pnp_probe(struct pnp_dev *idev, const struct pnp_device_id *dev_id)
{
- int i;
-
- for (i = 0; isapnp_clone_list[i].vendor != 0; i++) {
- struct pnp_dev *idev = NULL;
+ struct net_device *dev;
+ int err;
+
+ if ( !(dev = alloc_etherdev(0)) ){
+ err = -ENOMEM;
+ goto alloc_fail;
+ }
+
+ dev->base_addr = pnp_port_start(idev, 0);
+ dev->irq = pnp_irq(idev, 0);
+ printk(KERN_INFO "ne.c: PnP reports %s at i/o %#lx, irq %d\n",
+ idev->dev.name, dev->base_addr, dev->irq);
+
+ SET_MODULE_OWNER(dev);
+
+ if (ne_probe1(dev, dev->base_addr) != 0) { /* Shouldn't happen. */
+ printk(KERN_ERR "ne.c: Probe of PnP card at %#lx failed\n", dev->base_addr);
+ err = -ENXIO;
+ goto probe_fail;
+ }
+
+ if ( (err = register_netdev(dev)) != 0)
+ goto register_fail;
- while ((idev = pnp_find_dev(NULL,
- isapnp_clone_list[i].vendor,
- isapnp_clone_list[i].function,
- idev))) {
- /* Avoid already found cards from previous calls */
- if (pnp_device_attach(idev) < 0)
- continue;
- if (pnp_activate_dev(idev) < 0) {
- pnp_device_detach(idev);
- continue;
- }
- /* if no io and irq, search for next */
- if (!pnp_port_valid(idev, 0) || !pnp_irq_valid(idev, 0)) {
- pnp_device_detach(idev);
- continue;
- }
- /* found it */
- dev->base_addr = pnp_port_start(idev, 0);
- dev->irq = pnp_irq(idev, 0);
- printk(KERN_INFO "ne.c: ISAPnP reports %s at i/o %#lx, irq %d.\n",
- (char *) isapnp_clone_list[i].driver_data,
- dev->base_addr, dev->irq);
- if (ne_probe1(dev, dev->base_addr) != 0) { /* Shouldn't happen. */
- printk(KERN_ERR "ne.c: Probe of ISAPnP card at %#lx failed.\n", dev->base_addr);
- pnp_device_detach(idev);
- return -ENXIO;
- }
- ei_status.priv = (unsigned long)idev;
- break;
- }
- if (!idev)
- continue;
- return 0;
+ pnp_set_drvdata(idev, dev);
+
+ return 0;
+
+register_fail:
+ kfree(dev->priv);
+ release_region(dev->base_addr, NE_IO_EXTENT);
+probe_fail:
+ kfree(dev);
+alloc_fail:
+ return err;
+}
+
+static void ne_pnp_remove(struct pnp_dev *idev)
+{
+ struct net_device *dev = pnp_get_drvdata(idev);
+ if (dev) {
+ unregister_netdev(dev);
+ free_irq(dev->irq, dev);
+ release_region(dev->base_addr, NE_IO_EXTENT);
+ kfree(dev->priv);
+ kfree(dev);
}
-
- return -ENODEV;
}
+#endif
static int __init ne_probe1(struct net_device *dev, int ioaddr)
{
@@ -273,7 +285,7 @@
}
if (ei_debug && version_printed++ == 0)
- printk(KERN_INFO "%s" KERN_INFO "%s", version1, version2);
+ printk(KERN_INFO "%s", version);
printk(KERN_INFO "NE*000 ethercard probe at %#3x:", ioaddr);
@@ -757,6 +769,13 @@
{
int this_dev, found = 0;
+#ifdef CONFIG_PNP
+ found = pnp_register_driver(&ne_pnp_driver);
+ if (found < 0) {
+ return found;
+ }
+#endif
+
for (this_dev = 0; this_dev < MAX_NE_CARDS; this_dev++) {
struct net_device *dev = &dev_ne[this_dev];
dev->irq = irq[this_dev];
@@ -774,6 +793,9 @@
printk(KERN_WARNING "ne.c: No NE*000 card found at i/o = %#x\n", io[this_dev]);
else
printk(KERN_NOTICE "ne.c: You must supply \"io=0xNNN\" value(s) for ISA cards.\n");
+#ifdef CONFIG_PNP
+ pnp_unregister_driver(&ne_pnp_driver);
+#endif
return -ENXIO;
}
return 0;
@@ -783,17 +805,16 @@
{
int this_dev;
+#ifdef CONFIG_PNP
+ pnp_unregister_driver(&ne_pnp_driver);
+#endif
for (this_dev = 0; this_dev < MAX_NE_CARDS; this_dev++) {
struct net_device *dev = &dev_ne[this_dev];
if (dev->priv != NULL) {
- void *priv = dev->priv;
- struct pnp_dev *idev = (struct pnp_dev *)ei_status.priv;
- if (idev)
- pnp_device_detach(idev);
+ unregister_netdev(dev);
free_irq(dev->irq, dev);
release_region(dev->base_addr, NE_IO_EXTENT);
- unregister_netdev(dev);
- kfree(priv);
+ kfree(dev->priv);
}
}
}
next prev parent reply other threads:[~2003-05-01 16:46 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-05-01 16:53 [PATCH 0/4] NE2000 driver updates Jeff Muizelaar
2003-05-01 16:58 ` Jeff Muizelaar [this message]
2003-05-01 16:59 ` [PATCH 2/4] " Jeff Muizelaar
2003-05-01 16:59 ` [PATCH 3/4] " Jeff Muizelaar
2003-05-01 17:08 ` Jeff Muizelaar
2003-05-01 17:47 ` [PATCH 4/4] " Jeff Muizelaar
2003-05-01 19:23 ` [PATCH 0/4] " Alan Cox
2003-05-01 23:29 ` Jeff Muizelaar
2003-05-02 14:01 ` Alan Cox
2003-05-02 15:57 ` Jeff Garzik
2003-05-02 15:24 ` Alan Cox
2003-05-02 16:29 ` Riley Williams
2003-05-14 2:01 ` Jeff Muizelaar
2003-05-14 21:51 ` Adam Belay
2003-05-15 3:01 ` Jeff Muizelaar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3EB15242.4060105@rogers.com \
--to=muizelaar@rogers.com \
--cc=jgarzik@pobox.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox