From: kwijibo@zianet.com
To: Duncan Laurie <duncan@sun.com>
Cc: Tomas Szepe <szepe@pinerecords.com>, linux-kernel@vger.kernel.org
Subject: Re: 21rc6 serverworks IDE blows even more than is usual :)
Date: Thu, 29 May 2003 17:00:14 -0600 [thread overview]
Message-ID: <3ED690FE.5080602@zianet.com> (raw)
In-Reply-To: <oprpygljynury4o7@lists.bilicki.com>
Here is mine which doesn't work.
00:0f.0 ISA bridge: ServerWorks CSB5 South Bridge (rev 93)
00: 66 11 01 02 47 00 00 22 93 00 01 06 00 40 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 66 11 01 02
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 00 06 1e 0c 03 00 00 00 07 0f 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 8f c3 d1 15 00 00 00 20 00 00 00 00
70: 0f 00 00 00 00 00 00 00 80 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 01 07 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: a1 0e 00 00 80 00 5d 0f ff 0f 04 10 01 aa 00 ac
b0: 00 07 1c 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 03 58 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:0f.1 IDE interface: ServerWorks CSB5 IDE Controller (rev 93)
00: 66 11 12 02 45 01 00 02 93 82 01 01 08 40 80 00
10: f1 01 00 00 f5 03 00 00 01 00 00 00 01 00 00 00
20: 01 20 00 00 00 00 00 00 00 00 00 00 66 11 12 02
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 5d 20 5d 5d ff 00 ff ff 00 01 04 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 0f 04 03 00 00 00 00 00
60: 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Steve
Duncan Laurie wrote:
> On Thu, 29 May 2003 13:40:01 +0200, Tomas Szepe
> <szepe@pinerecords.com> wrote:
>
>>
>> I can't seem to get the onboard Serverworks CSB5 IDE controller (rev 93)
>> in a Compaq Proliant ML350 G3 to work (reliably/at all) no matter what
>> kernel I use:
>>
>
> Hi Tomas,
>
> This problem *may* actually be in the hardware... IIRC the CSB5 rev
> 93h is
> the A2.1 version of the chip which had big problems with DMA. The
> workaround
> options included a messy rework of the PCB or forcing it into PIO
> mode, so we
> decided instead to just stick with the A2.0 revision. :)
>
> However all of my knowledge about this particular issue is based on
> >1yr old
> information, so if you want to send the output of "lspci -xxx" for pci
> devices
> 00:0f.0 and 00:0f.1 I will check them over for any obvious settings
> the BIOS
> may have missed.
>
> -duncan
>
> -
> To unsubscribe from this list: send the line "unsubscribe
> linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
>
next prev parent reply other threads:[~2003-05-29 22:47 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-05-29 11:40 21rc6 serverworks IDE blows even more than is usual :) Tomas Szepe
2003-05-29 14:01 ` Alan Cox
2003-05-29 15:07 ` Marc-Christian Petersen
2003-05-29 15:16 ` Tomas Szepe
2003-05-29 15:24 ` Tomas Szepe
2003-05-29 15:53 ` Tomas Szepe
2003-05-29 16:57 ` kwijibo
2003-05-29 17:03 ` Tomas Szepe
2003-05-30 10:05 ` Alan Cox
2003-05-29 22:25 ` Duncan Laurie
2003-05-29 23:00 ` kwijibo [this message]
2003-05-30 7:17 ` Tomas Szepe
2003-05-30 10:11 ` Stephan von Krawczynski
2003-05-30 16:51 ` Duncan Laurie
2003-05-30 16:52 ` Tomas Szepe
2003-05-30 23:22 ` Stephan von Krawczynski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3ED690FE.5080602@zianet.com \
--to=kwijibo@zianet.com \
--cc=duncan@sun.com \
--cc=linux-kernel@vger.kernel.org \
--cc=szepe@pinerecords.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox