From: Patrick McHardy <kaber@trash.net>
To: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: two 2.4.21-rc7 BUGs (inode.c:562 / page_alloc.c:231)
Date: Fri, 06 Jun 2003 18:21:28 +0200 [thread overview]
Message-ID: <3EE0BF88.5020708@trash.net> (raw)
I got these two BUGs while running bk commit. I use the box to hack
on nfnetlink_conntrack so it could be related to this, but it ran stable
for several days before. bk process hung in D state, the whole partition
was not accessible anymore.
First one:
kernel BUG at inode.c:562!
invalid operand: 0000
CPU: 0
EIP: 0010:[<c014b8cd>] Not tainted
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00210202
eax: c296d920 ebx: c296d900 ecx: 00000001 edx: c296d920
esi: 000bfab8 edi: e3505d40 ebp: c487fdc0 esp: d351be88
ds: 0018 es: 0018 ss: 0018
Process bk (pid: 22151, stackpage=d351b000)
Stack: c296d900 f7bdfe00 c015b27c c296d900 f5cb2d40 00001000 c225c9f4
c225c980
f5cb2d40 c225c9f4 c0165f95 d04ec2a0 00000000 00000000 00000000
e3505d40
d351bf14 c296d900 c015fa75 e3505d40 f5cb2d40 d351bf14 00000000
e3505d40
Call Trace: [<c015b27c>] [<c0165f95>] [<c015fa75>] [<c015fa02>]
[<c015fb6f>]
[<c015c615>] [<c015c500>] [<c014c23b>] [<c01431d8>] [<c014333a>]
[<c010730f>]
Code: 0f 0b 32 02 1a d8 22 c0 8b 83 f8 00 00 00 a8 10 75 08 0f 0b
>>EIP; c014b8cd <clear_inode+1d/c0> <=====
>>eax; c296d920 <_end+2694d20/3a565480>
>>ebx; c296d900 <_end+2694d00/3a565480>
>>edx; c296d920 <_end+2694d20/3a565480>
>>edi; e3505d40 <_end+2322d140/3a565480>
>>ebp; c487fdc0 <_end+45a71c0/3a565480>
>>esp; d351be88 <_end+13243288/3a565480>
Trace; c015b27c <ext3_free_inode+7c/4e0>
Trace; c0165f95 <journal_get_write_access+55/80>
Trace; c015fa75 <ext3_reserve_inode_write+45/f0>
Trace; c015fa02 <ext3_mark_iloc_dirty+42/70>
Trace; c015fb6f <ext3_mark_inode_dirty+4f/60>
Trace; c015c615 <ext3_delete_inode+115/160>
Trace; c015c500 <ext3_delete_inode+0/160>
Trace; c014c23b <iput+eb/210>
Trace; c01431d8 <vfs_unlink+c8/170>
Trace; c014333a <sys_unlink+ba/120>
Trace; c010730f <system_call+33/38>
Code; c014b8cd <clear_inode+1d/c0>
00000000 <_EIP>:
Code; c014b8cd <clear_inode+1d/c0> <=====
0: 0f 0b ud2a <=====
Code; c014b8cf <clear_inode+1f/c0>
2: 32 02 xor (%edx),%al
Code; c014b8d1 <clear_inode+21/c0>
4: 1a d8 sbb %al,%bl
Code; c014b8d3 <clear_inode+23/c0>
6: 22 c0 and %al,%al
Code; c014b8d5 <clear_inode+25/c0>
8: 8b 83 f8 00 00 00 mov 0xf8(%ebx),%eax
Code; c014b8db <clear_inode+2b/c0>
e: a8 10 test $0x10,%al
Code; c014b8dd <clear_inode+2d/c0>
10: 75 08 jne 1a <_EIP+0x1a>
Code; c014b8df <clear_inode+2f/c0>
12: 0f 0b ud2a
Second one:
kernel BUG at page_alloc.c:231!
invalid operand: 0000
CPU: 0
EIP: 0010:[<c0130b4e>] Not tainted
EFLAGS: 00010202
eax: 010000c8 ebx: c171a5c0 ecx: 00001000 edx: 00025e1e
esi: c0252f30 edi: c0252f44 ebp: c0252f30 esp: da0b1e70
ds: 0018 es: 0018 ss: 0018
Process sh (pid: 22195, stackpage=da0b1000)
Stack: c21fe1c0 c012ab00 00024e1e 00000282 00000000 c0252f30 c02530b8
000003fd
00000000 000001d2 c0130daf e6765140 c0252fe0 c02530b0 ddd176c0
00104025
00000001 ddd179c0 e2675378 c0126b5c c21fe1c0 080de000 e6765140
00000001
Call Trace: [<c012ab00>] [<c0130daf>] [<c0126b5c>] [<c0126e57>]
[<c0114488>]
[<c0127466>] [<c0128403>] [<c012736c>] [<c0114310>] [<c0107400>]
Code: 0f 0b e7 00 20 ca 22 c0 8b 43 18 a9 80 00 00 00 74 08 0f 0b
>>EIP; c0130b4e <rmqueue+1fe/220> <=====
>>ebx; c171a5c0 <_end+14419c0/3a565480>
>>esi; c0252f30 <contig_page_data+b0/340>
>>edi; c0252f44 <contig_page_data+c4/340>
>>ebp; c0252f30 <contig_page_data+b0/340>
>>esp; da0b1e70 <_end+19dd9270/3a565480>
Trace; c012ab00 <filemap_nopage+1d0/210>
Trace; c0130daf <__alloc_pages+3f/170>
Trace; c0126b5c <do_anonymous_page+5c/100>
Trace; c0126e57 <handle_mm_fault+77/100>
Trace; c0114488 <do_page_fault+178/4d6>
Trace; c0127466 <__vma_link+56/c0>
Trace; c0128403 <do_brk+113/200>
Trace; c012736c <sys_brk+ec/120>
Trace; c0114310 <do_page_fault+0/4d6>
Trace; c0107400 <error_code+34/3c>
Code; c0130b4e <rmqueue+1fe/220>
00000000 <_EIP>:
Code; c0130b4e <rmqueue+1fe/220> <=====
0: 0f 0b ud2a <=====
Code; c0130b50 <rmqueue+200/220>
2: e7 00 out %eax,$0x0
Code; c0130b52 <rmqueue+202/220>
4: 20 ca and %cl,%dl
Code; c0130b54 <rmqueue+204/220>
6: 22 c0 and %al,%al
Code; c0130b56 <rmqueue+206/220>
8: 8b 43 18 mov 0x18(%ebx),%eax
Code; c0130b59 <rmqueue+209/220>
b: a9 80 00 00 00 test $0x80,%eax
Code; c0130b5e <rmqueue+20e/220>
10: 74 08 je 1a <_EIP+0x1a>
Code; c0130b60 <rmqueue+210/220>
12: 0f 0b ud2a
module loaded:
Module Size Used by Not tainted
nfnetlink_conntrack 10220 0 (unused)
ip_conntrack 20540 0 [nfnetlink_conntrack]
nfnetlink 3936 1 [nfnetlink_conntrack]
nfsd 73008 8 (autoclean)
nfs 71548 12 (autoclean)
lockd 50736 1 (autoclean) [nfsd nfs]
sunrpc 66240 1 (autoclean) [nfsd nfs lockd]
8139too 14824 1
mii 2464 0 [8139too]
rtc 6792 0 (autoclean)
versions:
Gnu C 3.3
Gnu make 3.80
util-linux 2.11z
mount 2.11z
modutils 2.4.21
e2fsprogs 1.34-WIP
Linux C Library 2.3.1
Dynamic linker (ldd) 2.3.1
Procps 3.1.8
Net-tools 1.60
Console-tools 0.2.3
Sh-utils 5.0
cpuinfo:
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 6
model name : AMD Athlon(tm) XP 2000+
stepping : 2
cpu MHz : 1666.774
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 mmx fxsr sse syscall mmxext 3dnowext 3dnow
bogomips : 3322.67
ioports:
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
01f0-01f7 : ide0
02f8-02ff : serial(set)
03c0-03df : vga+
03c0-03df : matrox
03f6-03f6 : ide0
03f8-03ff : serial(set)
0cf8-0cff : PCI conf1
d000-d03f : Ensoniq ES1371 [AudioPCI-97]
d000-d03f : es1371
d400-d4ff : Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+
d400-d4ff : 8139too
d800-d80f : VIA Technologies, Inc. VT82C586B PIPC Bus Master IDE
d800-d807 : ide0
d808-d80f : ide1
iomem:
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-5ffeffff : System RAM
00100000-0021fbed : Kernel code
0021fbee-00262b9f : Kernel data
5fff0000-5fff2fff : ACPI Non-volatile Storage
5fff3000-5fffffff : ACPI Tables
d0000000-d7ffffff : VIA Technologies, Inc. VT8367 [KT266]
d8000000-d9ffffff : PCI Bus #01
d8000000-d9ffffff : Matrox Graphics, Inc. MGA G550 AGP
d8000000-d9ffffff : matroxfb FB
da000000-dcffffff : PCI Bus #01
da000000-da003fff : Matrox Graphics, Inc. MGA G550 AGP
da000000-da003fff : matroxfb MMIO
db000000-db7fffff : Matrox Graphics, Inc. MGA G550 AGP
dd000000-dd0000ff : Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+
dd000000-dd0000ff : 8139too
ffff0000-ffffffff : reserved
lspci -vvv:
00:00.0 Host bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
Capabilities: [a0] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64-
HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW-
Rate=<none>
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:01.0 PCI bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo
KT266/A/333 AGP] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: da000000-dcffffff
Prefetchable memory behind bridge: d8000000-d9ffffff
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:09.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 06)
Subsystem: Ensoniq Creative Sound Blaster AudioPCI64V, AudioPCI128
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort-
<TAbort+ <MAbort+ >SERR- <PERR-
Latency: 32 (3000ns min, 32000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at d000 [size=64]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA
PME(D0+,D1-,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RT8139
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at d400 [size=256]
Region 1: Memory at dd000000 (32-bit, non-prefetchable) [size=256]
00:11.0 ISA bridge: VIA Technologies, Inc. VT8233A ISA Bridge
Subsystem: VIA Technologies, Inc. VT8233A ISA Bridge
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586/B/686A/B PIPC Bus
Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: VIA Technologies, Inc. VT8235 Bus Master
ATA133/100/66/33 IDE
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 0
Region 4: I/O ports at d800 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G550 AGP
(rev 01) (prog-if 00 [VGA])
Subsystem: Matrox Graphics, Inc. Millennium G550
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (4000ns min, 8000ns max), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: Memory at d8000000 (32-bit, prefetchable) [size=32M]
Region 1: Memory at da000000 (32-bit, non-prefetchable) [size=16K]
Region 2: Memory at db000000 (32-bit, non-prefetchable) [size=8M]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [f0] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64-
HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit-
FW- Rate=x1
reply other threads:[~2003-06-06 16:08 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3EE0BF88.5020708@trash.net \
--to=kaber@trash.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox