From: "O.Sezer" <sezero@superonline.com>
To: linux-kernel@vger.kernel.org
Cc: alan@redhat.com
Subject: ide, via, unnecessary probe?
Date: Mon, 16 Jun 2003 10:51:17 +0300 [thread overview]
Message-ID: <3EED76F5.1040407@superonline.com> (raw)
Hello Alan, all:
To the first channel of my onboard via ide controller
are attached no devices, only to the second channel.
During boot, the kernel keeps trying to probe the
first channel, as seen below, and delaying the boot
unnecessarily:
VP_IDE: IDE controller at PCI slot 00:04.1
VP_IDE: chipset revision 16
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c596b (rev 23) IDE UDMA66 controller on pci00:04.1
ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:DMA
SiI680: IDE controller at PCI slot 00:0a.0
SiI680: chipset revision 2
SiI680: not 100% native mode: will probe irqs later
SiI680: BASE CLOCK == 100
ide2: MMIO-DMA , BIOS settings: hde:pio, hdf:pio
ide3: MMIO-DMA , BIOS settings: hdg:pio, hdh:pio
hda: IRQ probe failed (0xfffffdf8)
hda: IRQ probe failed (0xfffffdf8)
hda: no response (status = 0x0a), resetting drive
hda: IRQ probe failed (0xfffffdf8)
hda: no response (status = 0x0a)
hdb: IRQ probe failed (0xfffffdf8)
hdb: IRQ probe failed (0xfffffdf8)
hdb: no response (status = 0x0a), resetting drive
hdb: IRQ probe failed (0xfffffdf8)
hdb: no response (status = 0x0a)
hdc: SONY CD-ROM CDU5221, ATAPI CD/DVD-ROM drive
hdd: RICOH CD-R/RW MP7200A, ATAPI CD/DVD-ROM drive
This is with 2.4.21-ac1 and 2.4.19-24mdk.
hda=noprobe hdb=noprobe boot parameters solves the
issue, but there should be some automagic to handle
this more nicely. I can try any patches happily.
Best regards,
Ozkan Sezer
reply other threads:[~2003-06-16 7:38 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3EED76F5.1040407@superonline.com \
--to=sezero@superonline.com \
--cc=alan@redhat.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox