From: John T Copeland <johnc@neto.com>
To: Alan Cox <alan@lxorguk.ukuu.org.uk>,
Andre H <andre@linux-ide.org>,
linuxkernel <linux-kernel@vger.kernel.org>
Subject: sil3112-siimage dma problems - 2.4.21 kernel
Date: Wed, 18 Jun 2003 13:59:25 -0500 [thread overview]
Message-ID: <3EF0B68D.4020203@neto.com> (raw)
I am having the same problems with the siimage driver as those posted in
the thread "siimage driver status". Also I read all the posts on the
siimage driver.
My motherboard is an Abit NF7-S rev2.0, nforce2 chipset and SIL3112A
controller. I tried the "hdparm -d1 -X66 /dev/hde" trick but I get the
dma timer error, siimage reset message, and the system repeats these
messages. Finally, after a long delay I get all kinds of io errors
reported from my ext3 journal and filesystem. At this point I have to
reset the system and reboot, back into the PIO mode. I don't know
anything else to try. Help.
I am running the 2.4.21 kernel.
I will send any additional info required if I can, and act as a test
case for the Abit NF7-S board. Most posts seem to be on the Asus mobo.
JohnC
reply other threads:[~2003-06-18 19:42 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3EF0B68D.4020203@neto.com \
--to=johnc@neto.com \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=andre@linux-ide.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox