Linux version 2.5.73-mm1-jd4 (root@ds666) (gcc version 3.3 (Debian)) #1 SMP Wed Jun 25 10:19:39 CEST 2003 Video mode to be used for restore is ffff BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000030000000 (usable) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 768MB LOWMEM available. On node 0 totalpages: 196608 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 192512 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 Building zonelist for node : 0 Kernel command line: auto BOOT_IMAGE=Linux ro root=305 mem=nopentium hdc=scsi console=ttyS0,38400n8 console=tty0 acpi=off noapm apm=off ide_setup: hdc=scsi Local APIC disabled by BIOS -- reenabling. Found and enabled local APIC! Initializing CPU#0 PID hash table entries: 4096 (order 12: 32768 bytes) Detected 1460.870 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 2916.35 BogoMIPS Memory: 773968k/786432k available (1893k kernel code, 11676k reserved, 731k data, 156k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) -> /dev -> /dev/console -> /root CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After generic, caps: 0383fbf7 c1c3fbff 00000000 00000020 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX CPU0: AMD Athlon(tm) XP 1700+ stepping 00 per-CPU timeslice cutoff: 731.54 usecs. task migration cache decay timeout: 10 msecs. SMP motherboard not detected. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1460.7185 MHz. ..... host bus clock speed is 265.5852 MHz. Starting migration thread for cpu 0 CPUS done 2 mtrr: v2.0 (20020519) Initializing RT netlink socket PCI: PCI BIOS revision 2.10 entry at 0xfb590, last bus=1 PCI: Using configuration type 1 BIO: pool of 256 setup, 15Kb (60 bytes/bio) biovec pool[0]: 1 bvecs: 256 entries (12 bytes) biovec pool[1]: 4 bvecs: 256 entries (48 bytes) biovec pool[2]: 16 bvecs: 256 entries (192 bytes) biovec pool[3]: 64 bvecs: 256 entries (768 bytes) biovec pool[4]: 128 bvecs: 256 entries (1536 bytes) biovec pool[5]: 256 bvecs: 256 entries (3072 bytes) ACPI: Subsystem revision 20030619 ACPI: Disabled via command line (acpi=off) spurious 8259A interrupt: IRQ7. Linux Plug and Play Support v0.96 (c) Adam Belay PnPBIOS: Scanning system for PnP BIOS support... PnPBIOS: Found PnP BIOS installation structure at 0xc00fc060 PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xc090, dseg 0xf0000 PnPBIOS: 14 nodes reported by PnP BIOS; 14 recorded by driver ACPI: ACPI tables contain no PCI IRQ routing entries swapper R current 1 0 2 (L-TLB) c012c745 00000000 00000001 00000001 00000000 c03b8088 00000000 c01194f1 00000000 00000578 000026bf c03d27e0 c03c1149 c0109f8a 00000578 f3fb7fde 0000000e 000026bf c03d27e0 c03c1149 f3fb8343 0000007b 0000007b ffffffef Call Trace: [] update_process_times+0x45/0x60 [] smp_apic_timer_interrupt+0x151/0x160 [] apic_timer_interrupt+0x1a/0x20 [] delay_tsc+0x14/0x20 [] __delay+0x12/0x20 [] serial8250_console_write+0xb3/0x270 [] __call_console_drivers+0x5e/0x60 [] call_console_drivers+0x7f/0x120 [] release_console_sem+0x61/0xf0 [] printk+0x140/0x1e0 [] acpi_pci_irq_init+0x16/0x51 [] pci_acpi_init+0x26/0x70 [] do_initcalls+0x2b/0xa0 [] init_workqueues+0xf/0x24 [] init+0x58/0x200 [] init+0x0/0x200 [] kernel_thread_helper+0x5/0xc PCI: Invalid ACPI-PCI IRQ routing table PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) Disabling VIA memory write queue (PCI ID 0305, rev 03): [55] 89 & 1f -> 09 PCI: Using IRQ router VIA [1106/0686] at 00:07.0 pty: 256 Unix98 ptys configured Machine check exception polling timer started. Enabling SEP on CPU 0 Journalled Block Device driver loaded devfs: v1.22 (20021013) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 Initializing Cryptographic API Applying VIA southbridge workaround. PCI: Disabling Via external APIC routing isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Software Watchdog Timer: 0.06, soft_margin: 60 sec, nowayout: 0 Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 00:07.1 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:07.1 ide0: BM-DMA at 0xb000-0xb007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xb008-0xb00f, BIOS settings: hdc:DMA, hdd:DMA hda: IC35L060AVV207-0, ATA DISK drive anticipatory scheduling elevator ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: SONY CD-RW CRX175E2, ATAPI CD/DVD-ROM drive hdd: Pioneer DVD-ROM ATAPIModel DVD-104S 012, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 1024KiB hda: host protected area => 1 hda: 120103200 sectors (61493 MB) w/1821KiB Cache, CHS=7476/255/63, UDMA(100) /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 p7 > serio: i8042 AUX port at 0x60,0x64 irq 12 input: AT Set 2 keyboard on isa0060/serio0 serio: i8042 KBD port at 0x60,0x64 irq 1 NET4: Linux TCP/IP 1.0 for NET4.0 IP: routing cache hash table of 8192 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 65536) Software Suspend has a malfunctioning SMP support. Disabled :( found reiserfs format "3.6" with standard journal Reiserfs journal params: device hda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 reiserfs: checking transaction log (hda5) for (hda5) Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 156k freed NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. Adding 1052248k swap on /dev/hda2. Priority:-1 extents:1 SCSI subsystem initialized drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub Initializing USB Mass Storage driver... drivers/usb/core/usb.c: registered new driver usb-storage USB Mass Storage support registered. drivers/usb/core/usb.c: registered new driver usbkbd drivers/usb/input/usbkbd.c: :USB HID Boot Protocol keyboard driver Intel(R) PRO/100 Network Driver - version 2.3.13-k1 Copyright (c) 2003 Intel Corporation PCI: Found IRQ 11 for device 00:09.0 IRQ routing conflict for 00:07.5, have irq 10, want irq 11 PCI: Sharing IRQ 11 with 00:0f.0 e100: selftest OK. e100: eth0: Intel(R) PRO/100 Network Connection Hardware receive checksums enabled cpu cycle saver enabled PCI: Found IRQ 10 for device 00:0a.0 IRQ routing conflict for 00:07.2, have irq 5, want irq 10 IRQ routing conflict for 00:07.3, have irq 5, want irq 10 PCI: Sharing IRQ 10 with 00:0e.0 PCI: Sharing IRQ 10 with 00:0e.1 e100: selftest OK. e100: eth1: Intel(R) PRO/100 Network Connection registering 0-6000 PCI: Found IRQ 9 for device 00:0c.0 drivers/usb/core/usb.c: registered new driver hiddev drivers/usb/core/usb.c: registered new driver hid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice drivers/usb/core/usb.c: registered new driver usbmouse drivers/usb/input/usbmouse.c: v1.6:USB HID Boot Protocol mouse driver input: ImPS/2 Generic Wheel Mouse on isa0060/serio1 Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected VIA Apollo Pro KT133/KM133/TwisterK chipset agpgart: Maximum main memory to use for agp memory: 691M agpgart: AGP aperture is 256M @ 0xc0000000 Linux video capture interface: v1.00 bttv: driver version 0.9.4 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Host bridge is VIA Technologies, In VT8363/8365 [KT133/K bttv: Host bridge is VIA Technologies, In VT82C686 [Apollo Sup bttv: Bt8xx card found (0). PCI: Found IRQ 10 for device 00:0e.0 IRQ routing conflict for 00:07.2, have irq 5, want irq 10 IRQ routing conflict for 00:07.3, have irq 5, want irq 10 PCI: Sharing IRQ 10 with 00:0a.0 PCI: Sharing IRQ 10 with 00:0e.1 bttv0: Bt878 (rev 2) at 00:0e.0, irq: 10, latency: 32, mmio: 0xe3221000 bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb bttv0: using: BT878(Hauppauge (bt878)) [card=10,autodetected] bttv0: Hauppauge/Voodoo msp34xx: reset line init [5] bttv0: Hauppauge eeprom: model=61324, tuner=Philips FI1216 MK2 (5), radio=no bttv0: using tuner=5 bttv0: i2c: checking for MSP34xx @ 0x80... found msp34xx: init: chip=MSP3410D-B4 +nicam +simple msp3410: daemon started registering 1-0040 bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found tvaudio: TV audio decoder + audio/video mux driver tvaudio: known chips: tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951),ta8874z tuner: chip found @ 0xc2 tuner: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) registering 1-0061 bttv0: registered device video0 bttv0: registered device vbi0 bttv0: PLL: 28636363 => 35468950 .. ok found reiserfs format "3.6" with standard journal Reiserfs journal params: device hda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 reiserfs: checking transaction log (hda7) for (hda7) Using r5 hash to sort names found reiserfs format "3.6" with standard journal Reiserfs journal params: device hda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 reiserfs: checking transaction log (hda6) for (hda6) Using r5 hash to sort names e100: eth0 NIC Link is Up 100 Mbps Half duplex Module lockd cannot be unloaded due to unsafe usage in include/linux/module.h:479