From: "Luca T." <luca-t@libero.it>
To: linux-kernel@vger.kernel.org
Subject: /dev/random broken?
Date: Sun, 29 Jun 2003 01:24:21 +0200 [thread overview]
Message-ID: <3EFE23A5.2000608@libero.it> (raw)
Hello,
i am not sure if this is a kernel/module problem but so it seems to me.
My computer is an AMD 2000+ with an ABIT motherboard, my kernel version
is 2.4.21-0.13mdk (but i tried it with 2.4.21-0.18mdk too and it doesn't
work either).
If i give this command:
dd if=/dev/zero of=./xxx bs=1024 count=100
it will work perfectly. But if i try to do the same reading from
/dev/random with this command:
dd if=/dev/random of=./xxx bs=1024 count=100
it will just sit there and stare at me until i move the mouse... and
then the program will exit without any error message (i checked in
/var/log/messages too and there is no message there either about this).
Is this a bug? If yes... do you have any idea that would help me fix it?
Thank you,
Luca
P.S.: I add here more info about my configuration:
[luca@ATH2000 luca]$ cat /proc/version
Linux version 2.4.21-0.13mdk (flepied@bi.mandrakesoft.com) (gcc version
3.2.2 (Mandrake Linux 9.1 3.2.2-3mdk)) #1 Fri Mar 14 15:08:06 EST 2003
[luca@ATH2000 luca]$ cat /proc/modules
saa7113h 7776 0 (autoclean)
rivatv 68156 0
i2c-algo-bit 9064 2 [rivatv]
i2c-core 21192 0 [saa7113h rivatv i2c-algo-bit]
appletalk 25700 1 (autoclean)
ipx 21252 1 (autoclean)
parport_pc 25096 1 (autoclean)
lp 8096 0 (autoclean)
parport 34176 1 (autoclean) [parport_pc lp]
agpgart 40896 3 (autoclean) [rivatv]
NVdriver 1149824 10 (autoclean)
nls_cp437 5148 2 (autoclean)
nls_iso8859-1 3516 2 (autoclean)
smbfs 40144 2 (autoclean)
es1371 29000 1
soundcore 6276 0 [es1371]
ac97_codec 12488 0 [es1371]
gameport 3316 0 [es1371]
nfsd 74256 0 (autoclean)
af_packet 14952 0 (autoclean)
sr_mod 16920 0 (autoclean)
floppy 55132 0
8139too 17160 1 (autoclean)
mii 3832 0 (autoclean) [8139too]
supermount 15296 3 (autoclean)
ide-cd 33856 0
cdrom 31648 0 [sr_mod ide-cd]
ide-scsi 11280 0
pwc 45064 0
videodev 7872 3 [rivatv pwc]
usbmouse 2936 0 (unused)
keybdev 2720 0 (unused)
mousedev 5268 0 (unused)
hid 20900 0 (unused)
evdev 5632 1
wacom 7096 0 (unused)
input 5664 0 [usbmouse keybdev mousedev hid evdev wacom]
printer 8448 0 (unused)
usb-uhci 24652 0 (unused)
usbcore 72992 1 [pwc usbmouse hid wacom printer usb-uhci]
rtc 8060 0 (autoclean)
reiserfs 175120 2
sd_mod 11548 0 (unused)
ataraid 6852 0 (unused)
scsi_mod 91796 3 [sr_mod ide-scsi sd_mod]
[luca@ATH2000 luca]$ cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 8
model name : AMD Athlon(tm) XP 2000+
stepping : 0
cpu MHz : 1667.412
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 mmx fxsr sse syscall mmxext 3dnowext 3dnow
bogomips : 3329.22
[luca@ATH2000 luca]$ cat /proc/ioports
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
01f0-01f7 : ide0
02f8-02ff : serial(auto)
0378-037a : parport0
037b-037f : parport0
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0cf8-0cff : PCI conf1
c000-c0ff : Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+
c000-c0ff : 8139too
c400-c43f : Ensoniq 5880 AudioPCI
c400-c43f : es1371
c800-c80f : VIA Technologies, Inc. VT82C586B PIPC Bus Master IDE
c800-c807 : ide0
c808-c80f : ide1
cc00-cc1f : VIA Technologies, Inc. USB
cc00-cc1f : usb-uhci
d000-d01f : VIA Technologies, Inc. USB (#2)
d000-d01f : usb-uhci
d400-d407 : Triones Technologies, Inc. HPT366/368/370/370A/372
d800-d803 : Triones Technologies, Inc. HPT366/368/370/370A/372
dc00-dc07 : Triones Technologies, Inc. HPT366/368/370/370A/372
dc00-dc07 : ide3
e000-e003 : Triones Technologies, Inc. HPT366/368/370/370A/372
e002-e002 : ide3
e400-e4ff : Triones Technologies, Inc. HPT366/368/370/370A/372
e400-e407 : ide2
e408-e40f : ide3
e410-e4ff : HPT372
[luca@ATH2000 luca]$ cat /proc/ioports
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
01f0-01f7 : ide0
02f8-02ff : serial(auto)
0378-037a : parport0
037b-037f : parport0
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0cf8-0cff : PCI conf1
c000-c0ff : Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+
c000-c0ff : 8139too
c400-c43f : Ensoniq 5880 AudioPCI
c400-c43f : es1371
c800-c80f : VIA Technologies, Inc. VT82C586B PIPC Bus Master IDE
c800-c807 : ide0
c808-c80f : ide1
cc00-cc1f : VIA Technologies, Inc. USB
cc00-cc1f : usb-uhci
d000-d01f : VIA Technologies, Inc. USB (#2)
d000-d01f : usb-uhci
d400-d407 : Triones Technologies, Inc. HPT366/368/370/370A/372
d800-d803 : Triones Technologies, Inc. HPT366/368/370/370A/372
dc00-dc07 : Triones Technologies, Inc. HPT366/368/370/370A/372
dc00-dc07 : ide3
e000-e003 : Triones Technologies, Inc. HPT366/368/370/370A/372
e002-e002 : ide3
e400-e4ff : Triones Technologies, Inc. HPT366/368/370/370A/372
e400-e407 : ide2
e408-e40f : ide3
e410-e4ff : HPT372
[luca@ATH2000 luca]$
[luca@ATH2000 luca]$ cat /proc/iomem
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000cc000-000cfdff : Extension ROM
000f0000-000fffff : System ROM
00100000-1ffeffff : System RAM
00100000-00260a36 : Kernel code
00260a37-0037831f : Kernel data
1fff0000-1fff2fff : ACPI Non-volatile Storage
1fff3000-1fffffff : ACPI Tables
d0000000-d7ffffff : VIA Technologies, Inc. VT8367 [KT266]
d8000000-d9ffffff : PCI Bus #01
d8000000-d9ffffff : nVidia Corporation NV5 [Riva TnT2]
d8000000-d9ffffff : rivatv
da000000-dbffffff : PCI Bus #01
da000000-daffffff : nVidia Corporation NV5 [Riva TnT2]
da000000-daffffff : rivatv
dd000000-dd0000ff : Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+
dd000000-dd0000ff : 8139too
fec00000-fec00fff : reserved
fee00000-fee00fff : reserved
ffff0000-ffffffff : reserved
[root@ATH2000 luca]# lspci -vvv
00:00.0 Host bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
Capabilities: [a0] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64-
HTrans- 64bit- FW- AGP3- Rate=x1,x2
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP+ GART64- 64bit-
FW- Rate=x2
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:01.0 PCI bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo
KT266/A/333 AGP] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: da000000-dbffffff
Prefetchable memory behind bridge: d8000000-d9ffffff
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Unex Technology Corp. ND010
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at c000 [size=256]
Region 1: Memory at dd000000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0f.0 Multimedia audio controller: Ensoniq 5880 AudioPCI (rev 02)
Subsystem: Ensoniq Creative Sound Blaster AudioPCI128
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 32 (3000ns min, 32000ns max)
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at c400 [size=64]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.0 ISA bridge: VIA Technologies, Inc. VT8233A ISA Bridge
Subsystem: VIA Technologies, Inc. VT8233A ISA Bridge
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586/B/686A/B PIPC Bus
Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: VIA Technologies, Inc. VT8235 Bus Master
ATA133/100/66/33 IDE
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 0
Region 4: I/O ports at c800 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.2 USB Controller: VIA Technologies, Inc. USB (rev 23) (prog-if 00
[UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin D routed to IRQ 11
Region 4: I/O ports at cc00 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.3 USB Controller: VIA Technologies, Inc. USB (rev 23) (prog-if 00
[UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin D routed to IRQ 11
Region 4: I/O ports at d000 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:13.0 RAID bus controller: Triones Technologies, Inc.
HPT366/368/370/370A/372 (rev 05)
Subsystem: Triones Technologies, Inc. HPT370A
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 120 (2000ns min, 2000ns max), cache line size 08
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at d400 [size=8]
Region 1: I/O ports at d800 [size=4]
Region 2: I/O ports at dc00 [size=8]
Region 3: I/O ports at e000 [size=4]
Region 4: I/O ports at e400 [size=256]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller: nVidia Corporation NV5 [RIVA
TNT2/TNT2 Pro] (rev 11) (prog-if 00 [VGA])
Subsystem: Asustek Computer, Inc. AGP-V3800 SGRAM
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 248 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at da000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d8000000 (32-bit, prefetchable) [size=32M]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [60] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64-
HTrans- 64bit- FW- AGP3- Rate=x1,x2
Command: RQ=32 ArqSz=0 Cal=0 SBA- AGP+ GART64- 64bit-
FW- Rate=x2
next reply other threads:[~2003-06-28 23:11 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-06-28 23:24 Luca T. [this message]
2003-07-01 4:30 ` /dev/random broken? H. Peter Anvin
[not found] <E19WOvK-0001I7-00@andromeda>
2003-06-29 2:10 ` Justin Pryzby
2003-06-29 2:31 ` Robert Love
2003-06-29 2:36 ` Valdis.Kletnieks
-- strict thread matches above, loose matches on Subject: below --
2003-06-28 23:18 Luca T.
2003-06-28 23:26 ` Rudo Thomas
2003-06-28 23:29 ` Måns Rullgård
2003-06-28 23:30 ` Tom Vier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3EFE23A5.2000608@libero.it \
--to=luca-t@libero.it \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox