From: Charles-Edouard Ruault <ce@ruault.com>
To: Francois Romieu <romieu@fr.zoreil.com>
Cc: linux-kernel@vger.kernel.org
Subject: Re: kernel 2.4.21 , large disk write => system crawls
Date: Fri, 04 Jul 2003 00:30:02 +0200 [thread overview]
Message-ID: <3F04AE6A.8000504@ruault.com> (raw)
In-Reply-To: <20030704000236.A23027@electric-eye.fr.zoreil.com>
Francois Romieu wrote:
>Charles-Edouard Ruault <ce@ruault.com> :
>[...]
>
>
>>when i do a large disk write operation ( copy a big file for example ),
>>the whole system becomes very busy ( system goes into 99% cpu
>>utilization in kernel mode ), other tasks are stopped ( for example
>>
>>
>
>Please add:
>- 'vmstat 1' output before/after/during slowdown;
>- dmesg output after boot.
>
Hi Francois,
thanks a lot for the quick reply.
Here it is the info you requested ( just did tar xvjf
linux-2.4.21.tar.bz2 )
procs memory swap io
system cpu
r b w swpd free buff cache si so bi bo in cs us
sy id
1 0 0 21612 33752 33048 337852 0 0 4 14 60 14
19 3 78
0 0 0 21612 33748 33048 337852 0 0 0 0 360 695
1 8 91
3 0 0 21612 28580 33088 339168 0 0 456 0 1013 1379 40
14 47
4 0 0 21612 26616 33176 340924 0 0 280 1384 3953 1095 55
45 0
3 0 0 21612 23172 33324 344056 0 0 460 0 1024 2354 78
22 0
2 1 0 21612 18368 33408 348596 0 0 668 0 1953 2757 57
40 3
3 0 0 21612 13300 33628 353216 0 0 720 0 1532 2537 67
25 8
3 0 0 21612 8024 33772 357920 0 0 736 0 2065 2373 54
41 5
4 0 1 21612 6536 33844 359192 0 0 284 17736 36558 922
6 94 0
5 0 0 21612 4440 34072 361008 0 0 628 0 1816 2546 58
28 14
6 0 1 21612 4472 34092 360924 0 0 4 4364 8930 132 5
95 0
1 0 0 21612 4388 34232 360692 0 0 740 444 2700 2324 61
35 4
4 0 0 21612 4368 34460 359976 0 0 520 0 1380 3071 63
29 8
3 0 0 21612 4460 34656 359392 0 0 728 0 1794 3408 63
33 4
6 0 2 21612 4440 34820 358948 0 0 732 7452 17013 2577
22 75 3
4 0 2 21612 4352 34844 358984 0 0 128 13084 27045 268
4 96 0
5 0 0 21612 4404 35004 358748 0 0 312 1240 3412 1984 50
45 6
3 0 0 21612 4392 35140 358504 0 0 812 0 1964 2468 64
32 4
2 0 0 21612 4404 35256 358320 0 0 780 0 1900 2527 65
34 1
4 0 0 21612 4452 35400 358036 0 0 808 0 1968 2704 68
29 3
4 0 0 21612 4412 35516 357844 0 0 672 0 1679 2762 61
32 7
6 0 2 21612 4424 35568 357724 0 0 132 10772 22319 999
9 90 0
11 0 1 21612 4420 35568 357732 0 0 0 6060 12382 88
2 98 0
4 1 1 21612 4372 35636 357696 0 0 128 3840 8226 302 10
90 0
3 0 0 21612 4412 35764 357536 0 0 524 1184 3678 1928 55
43 2
4 0 0 21612 4448 34696 358516 0 0 792 0 1924 2564 66
32 2
4 0 1 21612 4376 33520 359608 0 0 676 0 1692 2619 64
33 3
4 0 0 21612 4364 32484 360480 0 0 676 0 1689 2669 66
31 3
3 0 0 21612 4436 31088 361764 0 0 784 0 1929 3057 67
32 1
8 0 1 21612 4492 30816 361932 0 0 0 20520 41947 930
5 95 0
5 0 0 21612 4420 29424 363468 0 0 516 1964 5267 1408 40
60 0
4 0 0 21612 4348 28592 364408 0 0 912 0 2170 2475 65
33 2
2 0 0 21612 4444 28708 364084 0 0 656 0 1650 2757 72
27 1
3 0 0 21612 4464 28852 363796 0 0 664 0 1663 2740 75
23 2
5 0 1 21612 4264 29012 363684 0 0 792 0 1938 2634 66
29 5
8 0 2 21612 4344 29060 363508 0 0 284 9744 20533 841
9 91 0
9 0 1 21612 4344 29060 363508 0 0 0 5296 10796 52
1 99 0
3 0 1 21612 4436 29084 363292 0 0 0 4788 9838 217 5
95 0
2 0 0 21612 4372 29268 363184 0 0 820 0 1911 2509 69
29 2
6 0 2 21612 4348 29312 363100 0 0 132 6088 12873 752
11 89 0
3 0 0 21612 4360 29480 362832 0 0 676 4 1697 3061 76
19 5
5 0 0 21612 4428 26392 365748 0 0 684 0 1706 2591 72
26 2
2 0 0 21612 4372 24628 367468 0 0 792 0 1921 2578 61
36 3
4 0 0 21612 4468 23900 367956 0 0 664 0 1668 2724 73
26 1
4 0 1 21612 4352 23936 367988 0 0 128 18688 38440 704
4 96 0
everytime i experience a slowdown, there's a 'big' number in the io (bo)
column.
i don't have a dmseg available but here's the exerpt of
/var/log/messages at boot :
Jun 27 22:52:31 charlus syslogd 1.4.1: restart.
Jun 27 22:52:31 charlus syslog: syslogd startup succeeded
Jun 27 22:52:31 charlus kernel: klogd 1.4.1, log source = /proc/kmsg
started.
Jun 27 22:52:31 charlus kernel: Linux version 2.4.21
(root@charlus.dyndns.org) (gcc version 3.2.2 20030222 (Red Hat Linux
3.2.2-5)) #2 Mon Jun 16 16:10:04 CEST 2003
Jun 27 22:52:31 charlus kernel: BIOS-provided physical RAM map:
Jun 27 22:52:31 charlus kernel: BIOS-e820: 0000000000000000 -
000000000009fc00 (usable)
Jun 27 22:52:31 charlus kernel: BIOS-e820: 000000000009fc00 -
00000000000a0000 (reserved)
Jun 27 22:52:31 charlus kernel: BIOS-e820: 00000000000f0000 -
0000000000100000 (reserved)
Jun 27 22:52:31 charlus kernel: BIOS-e820: 0000000000100000 -
000000001fffc000 (usable)
Jun 27 22:52:31 charlus kernel: BIOS-e820: 000000001fffc000 -
000000001ffff000 (ACPI data)
Jun 27 22:52:31 charlus kernel: BIOS-e820: 000000001ffff000 -
0000000020000000 (ACPI NVS)
Jun 27 22:52:31 charlus kernel: BIOS-e820: 00000000fec00000 -
00000000fec01000 (reserved)
Jun 27 22:52:31 charlus kernel: BIOS-e820: 00000000fee00000 -
00000000fee01000 (reserved)
Jun 27 22:52:31 charlus kernel: BIOS-e820: 00000000ffff0000 -
0000000100000000 (reserved)
Jun 27 22:52:31 charlus syslog: klogd startup succeeded
Jun 27 22:52:31 charlus kernel: 511MB LOWMEM available.
Jun 27 22:52:31 charlus kernel: On node 0 totalpages: 131068
Jun 27 22:52:31 charlus kernel: zone(0): 4096 pages.
Jun 27 22:52:31 charlus kernel: zone(1): 126972 pages.
Jun 27 22:52:31 charlus irqbalance: irqbalance startup succeeded
Jun 27 22:52:31 charlus kernel: zone(2): 0 pages.
Jun 27 22:52:31 charlus kernel: Kernel command line: ro root=/dev/hda8
hdc=ide-scsi vga=0x318 sda=usb-storage pci=biosirq
Jun 27 22:52:31 charlus kernel: ide_setup: hdc=ide-scsi
Jun 27 22:52:31 charlus keytable: Loading keymap:
Jun 27 22:52:31 charlus kernel: Found and enabled local APIC!
Jun 27 22:52:31 charlus kernel: Initializing CPU#0
Jun 27 22:52:31 charlus kernel: Detected 2000.121 MHz processor.
Jun 27 22:52:31 charlus kernel: Console: colour dummy device 80x25
Jun 27 22:52:31 charlus kernel: Calibrating delay loop... 3984.58 BogoMIPS
Jun 27 22:52:31 charlus kernel: Memory: 516028k/524272k available (1363k
kernel code, 7856k reserved, 468k data, 112k init, 0k highmem)
Jun 27 22:52:31 charlus kernel: Dentry cache hash table entries: 65536
(order: 7, 524288 bytes)
Jun 27 22:52:31 charlus kernel: Inode cache hash table entries: 32768
(order: 6, 262144 bytes)
Jun 27 22:52:31 charlus kernel: Mount cache hash table entries: 512
(order: 0, 4096 bytes)
Jun 27 22:52:31 charlus kernel: Buffer-cache hash table entries: 32768
(order: 5, 131072 bytes)
Jun 27 22:52:31 charlus kernel: Page-cache hash table entries: 131072
(order: 7, 524288 bytes)
Jun 27 22:52:31 charlus kernel: CPU: L1 I Cache: 64K (64 bytes/line), D
cache 64K (64 bytes/line)
Jun 27 22:52:31 charlus kernel: CPU: L2 Cache: 256K (64 bytes/line)
Jun 27 22:52:31 charlus kernel: Intel machine check architecture supported.
Jun 27 22:52:31 charlus kernel: Intel machine check reporting enabled on
CPU#0.
Jun 27 22:52:31 charlus kernel: CPU: AMD Athlon(TM) XP 2400+ stepping 01
Jun 27 22:52:31 charlus kernel: Enabling fast FPU save and restore... done.
Jun 27 22:52:31 charlus kernel: Enabling unmasked SIMD FPU exception
support... done.
Jun 27 22:52:31 charlus keytable:
Jun 27 22:52:31 charlus kernel: Checking 'hlt' instruction... OK.
Jun 27 22:52:31 charlus keytable: Loading system font:
Jun 27 22:52:31 charlus kernel: POSIX conformance testing by UNIFIX
Jun 27 22:52:31 charlus kernel: enabled ExtINT on CPU#0
Jun 27 22:52:31 charlus kernel: ESR value before enabling vector: 00000000
Jun 27 22:52:31 charlus kernel: ESR value after enabling vector: 00000000
Jun 27 22:52:31 charlus kernel: Using local APIC timer interrupts.
Jun 27 22:52:31 charlus kernel: calibrating APIC timer ...
Jun 27 22:52:31 charlus kernel: ..... CPU clock speed is 2000.1599 MHz.
Jun 27 22:52:31 charlus kernel: ..... host bus clock speed is 266.6880 MHz.
Jun 27 22:52:31 charlus kernel: cpu: 0, clocks: 2666880, slice: 1333440
Jun 27 22:52:31 charlus kernel:
CPU0<T0:2666880,T1:1333440,D:0,S:1333440,C:2666880>
Jun 27 22:52:31 charlus kernel: mtrr: v1.40 (20010327) Richard Gooch
(rgooch@atnf.csiro.au)
Jun 27 22:52:31 charlus kernel: mtrr: detected mtrr type: Intel
Jun 27 22:52:31 charlus kernel: PCI: PCI BIOS revision 2.10 entry at
0xf1720, last bus=1
Jun 27 22:52:31 charlus kernel: PCI: Using configuration type 1
Jun 27 22:52:31 charlus kernel: PCI: Probing PCI hardware
Jun 27 22:52:31 charlus kernel: PCI: Using IRQ router VIA [1106/3177] at
00:11.0
Jun 27 22:52:31 charlus kernel: PCI: Found IRQ 10 for device 00:07.0
Jun 27 22:52:31 charlus kernel: PCI: Sharing IRQ 10 with 00:08.0
Jun 27 22:52:31 charlus kernel: isapnp: Scanning for PnP cards...
Jun 27 22:52:31 charlus kernel: isapnp: No Plug & Play device found
Jun 27 22:52:31 charlus kernel: Linux NET4.0 for Linux 2.4
Jun 27 22:52:31 charlus kernel: Based upon Swansea University Computer
Society NET3.039
Jun 27 22:52:31 charlus kernel: Initializing RT netlink socket
Jun 27 22:52:31 charlus kernel: Starting kswapd
Jun 27 22:52:31 charlus kernel: Journalled Block Device driver loaded
Jun 27 22:52:31 charlus kernel: ACPI: Core Subsystem version [20011018]
Jun 27 22:52:31 charlus kernel: ACPI: Subsystem enabled
Jun 27 22:52:31 charlus kernel: ACPI: System firmware supports S0 S1 S4 S5
Jun 27 22:52:31 charlus keytable:
Jun 27 22:52:31 charlus kernel: Processor[0]: C0 C1
Jun 27 22:52:31 charlus rc: Starting keytable: succeeded
Jun 27 22:52:31 charlus kernel: ACPI: Power Button (FF) found
Jun 27 22:52:31 charlus kernel: ACPI: Multiple power buttons detected,
ignoring fixed-feature
Jun 27 22:52:31 charlus kernel: ACPI: Power Button (CM) found
Jun 27 22:52:31 charlus kernel: vesafb: framebuffer at 0xe8000000,
mapped to 0xe0809000, size 18432k
Jun 27 22:52:31 charlus kernel: vesafb: mode is 1024x768x24,
linelength=3072, pages=55
Jun 27 22:52:31 charlus kernel: vesafb: protected mode interface info at
c000:58a8
Jun 27 22:52:31 charlus kernel: vesafb: scrolling: redraw
Jun 27 22:52:31 charlus kernel: vesafb: directcolor: size=0:8:8:8,
shift=0:16:8:0
Jun 27 22:52:31 charlus kernel: Console: switching to colour frame
buffer device 128x48
Jun 27 22:52:31 charlus kernel: fb0: VESA VGA frame buffer device
Jun 27 22:52:31 charlus kernel: pty: 256 Unix98 ptys configured
Jun 27 22:52:31 charlus kernel: Serial driver version 5.05c (2001-07-08)
with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
Jun 27 22:52:31 charlus kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A
Jun 27 22:52:31 charlus kernel: ttyS01 at 0x02f8 (irq = 3) is a 16550A
Jun 27 22:52:31 charlus kernel: Floppy drive(s): fd0 is 1.44M
Jun 27 22:52:31 charlus kernel: spurious 8259A interrupt: IRQ7.
Jun 27 22:52:31 charlus kernel: FDC 0 is a post-1991 82Jun 27 22:52:31
charlus kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
Jun 27 22:52:31 charlus kernel: ide: Assuming 33MHz system bus speed for
PIO modes; override with idebus=xx
Jun 27 22:52:31 charlus kernel: VP_IDE: IDE controller at PCI slot 00:11.1
Jun 27 22:52:31 charlus kernel: VP_IDE: chipset revision 6
Jun 27 22:52:31 charlus kernel: VP_IDE: not 100%% native mode: will
probe irqs later
Jun 27 22:52:31 charlus kernel: VP_IDE: VIA vt8235 (rev 00) IDE UDMA133
controller on pci00:11.1
Jun 27 22:52:31 charlus kernel: ide0: BM-DMA at 0x9000-0x9007, BIOS
settings: hda:DMA, hdb:pio
Jun 27 22:52:31 charlus kernel: ide1: BM-DMA at 0x9008-0x900f, BIOS
settings: hdc:DMA, hdd:DMA
Jun 27 22:52:31 charlus kernel: hda: Maxtor 6Y080L0, ATA DISK drive
Jun 27 22:52:31 charlus kernel: blk: queue c0314e40, I/O limit 4095Mb
(mask 0xffffffff)
Jun 27 22:52:31 charlus kernel: hdc: PLEXTOR CD-R PX-W1610A, ATAPI
CD/DVD-ROM drive
Jun 27 22:52:31 charlus kernel: hdd: CREATIVEDVD5240E-1, ATAPI
CD/DVD-ROM drive
Jun 27 22:52:31 charlus kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Jun 27 22:52:31 charlus kernel: ide1 at 0x170-0x177,0x376 on irq 15
Jun 27 22:52:31 charlus kernel: hda: attached ide-disk driver.
Jun 27 22:52:31 charlus kernel: hda: host protected area => 1
Jun 27 22:52:31 charlus kernel: hda: 160086528 sectors (81964 MB)
w/2048KiB Cache, CHS=9964/255/63, UDMA(133)
Jun 27 22:52:31 charlus random: Initializing random number generator:
succeeded
Jun 27 22:52:31 charlus kernel: hdd: attached ide-cdrom driver.
Jun 27 22:52:31 charlus kernel: hdd: ATAPI 32X DVD-ROM drive, 512kB
Cache, DMA
Jun 27 22:52:31 charlus kernel: Uniform CD-ROM driver Revision: 3.12
Jun 27 22:52:31 charlus kernel: Partition check:
Jun 27 22:52:31 charlus kernel: hda: hda1 hda2 hda3 hda4 < hda5 hda6
hda7 hda8 hda9 hda10 >
Jun 27 22:52:31 charlus kernel: Linux Kernel Card Services 3.1.22
Jun 27 22:52:32 charlus kernel: options: [pci] [cardbus] [pm]
Jun 27 22:52:32 charlus kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Jun 27 22:52:32 charlus kernel: IP Protocols: ICMP, UDP, TCP, IGMP
Jun 27 22:52:32 charlus kernel: IP: routing cache hash table of 4096
buckets, 32Kbytes
Jun 27 22:52:32 charlus kernel: TCP: Hash tables configured (established
32768 bind 65536)
Jun 27 22:52:32 charlus kernel: NET4: Unix domain sockets 1.0/SMP for
Linux NET4.0.
Jun 27 22:52:32 charlus kernel: ds: no socket drivers loaded!
Jun 27 22:52:32 charlus kernel: kjournald starting. Commit interval 5
seconds
Jun 27 22:52:32 charlus kernel: EXT3-fs: mounted filesystem with ordered
data mode.
Jun 27 22:52:32 charlus kernel: VFS: Mounted root (ext3 filesystem)
readonly.
Jun 27 22:52:32 charlus kernel: Freeing unused kernel memory: 112k freed
Jun 27 22:52:32 charlus kernel: usb.c: registered new driver usbdevfs
Jun 27 22:52:32 charlus kernel: usb.c: registered new driver hub
Jun 27 22:52:32 charlus kernel: PCI: Found IRQ 3 for device 00:10.3
Jun 27 22:52:32 charlus kernel: IRQ routing conflict for 00:10.0, have
irq 9, want irq 3
Jun 27 22:52:32 charlus kernel: IRQ routing conflict for 00:10.1, have
irq 9, want irq 3
Jun 27 22:52:32 charlus kernel: IRQ routing conflict for 00:10.2, have
irq 9, want irq 3
Jun 27 22:52:32 charlus kernel: IRQ routing conflict for 00:10.3, have
irq 9, want irq 3
Jun 27 22:52:32 charlus kernel: ehci-hcd 00:10.3: VIA Technologies, Inc.
USB 2.0
Jun 27 22:52:32 charlus kernel: ehci-hcd 00:10.3: irq 9, pci mem e1a24000
Jun 27 22:52:32 charlus kernel: usb.c: new USB bus registered, assigned
bus number 1
Jun 27 22:52:32 charlus kernel: PCI: 00:10.3 PCI cache line size set
incorrectly (32 bytes) by BIOS/FW.
Jun 27 22:52:32 charlus kernel: PCI: 00:10.3 PCI cache line size
corrected to 64.
Jun 27 22:52:32 charlus kernel: ehci-hcd 00:10.3: USB 2.0 enabled, EHCI
1.00, driver 2003-Jan-22
Jun 27 22:52:32 charlus kernel: hub.c: USB hub found
Jun 27 22:52:32 charlus kernel: hub.c: 6 ports detected
Jun 27 22:52:32 charlus kernel: uhci.c: USB Universal Host Controller
Interface driver v1.1
Jun 27 22:52:32 charlus kernel: PCI: Found IRQ 3 for device 00:10.0
Jun 27 22:52:32 charlus kernel: IRQ routing conflict for 00:10.0, have
irq 9, want irq 3
Jun 27 22:52:32 charlus kernel: IRQ routing conflict for 00:10.1, have
irq 9, want irq 3
Jun 27 22:52:32 charlus kernel: IRQ routing conflict for 00:10.2, have
irq 9, want irq 3
Jun 27 22:52:32 charlus kernel: IRQ routing conflict for 00:10.3, have
irq 9, want irq 3
Jun 27 22:52:32 charlus kernel: uhci.c: USB UHCI at I/O 0xa000, IRQ 9
Jun 27 22:52:32 charlus kernel: usb.c: new USB bus registered, assigned
bus number 2
Jun 27 22:52:32 charlus kernel: hub.c: USB hub found
Jun 27 22:52:32 charlus kernel: hub.c: 2 ports detected
Jun 27 22:52:32 charlus kernel: PCI: Found IRQ 3 for device 00:10.1
Jun 27 22:52:32 charlus kernel: IRQ routing conflict for 00:10.0, have
irq 9, want irq 3
Jun 27 22:52:32 charlus kernel: IRQ routing conflict for 00:10.1, have
irq 9, want irq 3
Jun 27 22:52:32 charlus kernel: IRQ routing conflict for 00:10.2, have
irq 9, want irq 3
Jun 27 22:52:32 charlus kernel: IRQ routing conflict for 00:10.3, have
irq 9, want irq 3
Jun 27 22:52:32 charlus kernel: uhci.c: USB UHCI at I/O 0x9800, IRQ 9
Jun 27 22:52:32 charlus kernel: usb.c: new USB bus registered, assigned
bus number 3
Jun 27 22:52:32 charlus kernel: hub.c: USB hub found
Jun 27 22:52:32 charlus kernel: hub.c: 2 ports detected
Jun 27 22:52:32 charlus kernel: PCI: Found IRQ 3 for device 00:10.2
Jun 27 22:52:32 charlus netfs: Mounting other filesystems: succeeded
Jun 27 22:52:32 charlus kernel: IRQ routing conflict for 00:10.0, have
irq 9, want irq 3
Jun 27 22:52:32 charlus kernel: IRQ routing conflict for 00:10.1, have
irq 9, want irq 3
Jun 27 22:52:32 charlus kernel: IRQ routing conflict for 00:10.2, have
irq 9, want irq 3
Jun 27 22:52:32 charlus kernel: IRQ routing conflict for 00:10.3, have
irq 9, want irq 3
Jun 27 22:52:32 charlus kernel: uhci.c: USB UHCI at I/O 0x9400, IRQ 9
Jun 27 22:52:32 charlus kernel: usb.c: new USB bus registered, assigned
bus number 4
Jun 27 22:52:32 charlus kernel: hub.c: USB hub found
Jun 27 22:52:32 charlus kernel: hub.c: 2 ports detected
Jun 27 22:52:32 charlus kernel: usb.c: registered new driver hiddev
Jun 27 22:52:32 charlus kernel: usb.c: registered new driver hid
Jun 27 22:52:32 charlus kernel: hid-core.c: v1.8.1 Andreas Gal, Vojtech
Pavlik <vojtech@suse.cz>
Jun 27 22:52:32 charlus kernel: hid-core.c: USB HID support drivers
Jun 27 22:52:32 charlus kernel: mice: PS/2 mouse device common for all mice
Jun 27 22:52:32 charlus kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on
ide0(3,8), internal journal
Jun 27 22:52:32 charlus kernel: Adding Swap: 1574328k swap-space
(priority -1)
Jun 27 22:52:32 charlus kernel: kjournald starting. Commit interval 5
seconds
Jun 27 22:52:32 charlus kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on
ide0(3,1), internal journal
Jun 27 22:52:32 charlus kernel: EXT3-fs: mounted filesystem with ordered
data mode.
Jun 27 22:52:32 charlus kernel: kjournald starting. Commit interval 5
seconds
Jun 27 22:52:32 charlus kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on
ide0(3,10), internal journal
Jun 27 22:52:32 charlus kernel: EXT3-fs: mounted filesystem with ordered
data mode.
Jun 27 22:52:32 charlus kernel: kjournald starting. Commit interval 5
seconds
Jun 27 22:52:32 charlus kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on
ide0(3,3), internal journal
Jun 27 22:52:32 charlus kernel: EXT3-fs: mounted filesystem with ordered
data mode.
Jun 27 22:52:32 charlus kernel: kjournald starting. Commit interval 5
seconds
Jun 27 22:52:32 charlus kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on
ide0(3,2), internal journal
Jun 27 22:52:32 charlus kernel: EXT3-fs: mounted filesystem with ordered
data mode.
Jun 27 22:52:32 charlus kernel: kjournald starting. Commit interval 5
seconds
Jun 27 22:52:32 charlus kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on
ide0(3,9), internal journal
Jun 27 22:52:32 charlus kernel: EXT3-fs: mounted filesystem with ordered
data mode.
Jun 27 22:52:32 charlus kernel: kjournald starting. Commit interval 5
seconds
Jun 27 22:52:32 charlus kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on
ide0(3,5), internal journal
Jun 27 22:52:32 charlus kernel: EXT3-fs: mounted filesystem with ordered
data mode.
Jun 27 22:52:32 charlus kernel: kjournald starting. Commit interval 5
seconds
Jun 27 22:52:32 charlus kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on
ide0(3,7), internal journal
Jun 27 22:52:32 charlus kernel: EXT3-fs: mounted filesystem with ordered
data mode.
Jun 27 22:52:32 charlus kernel: ohci1394: $Rev: 896 $ Ben Collins
<bcollins@debian.org>
Jun 27 22:52:32 charlus kernel: PCI: Enabling device 00:07.0 (0094 -> 0097)
Jun 27 22:52:32 charlus kernel: PCI: Found IRQ 10 for device 00:07.0
Jun 27 22:52:32 charlus kernel: PCI: Sharing IRQ 10 with 00:08.0
Jun 27 22:52:32 charlus kernel: ohci1394_0: OHCI-1394 1.0 (PCI):
IRQ=[10] MMIO=[d6000000-d60007ff] Max Packet=[2048]
Jun 27 22:52:32 charlus kernel: hub.c: new USB device 00:10.2-1,
assigned address 2
Jun 27 22:52:32 charlus kernel: usb.c: USB device 2 (vend/prod
0x46d/0x870) is not claimed by any active driver.
Jun 27 22:52:32 charlus kernel: hub.c: new USB device 00:10.1-1,
assigned address 2
Jun 27 22:52:32 charlus kernel: usb.c: USB device 2 (vend/prod
0x46d/0x870) is not claimed by any active driver.
Jun 27 22:52:32 charlus kernel: hub.c: new USB device 00:10.1-1,
assigned address 2
Jun 27 22:52:32 charlus kernel: input0: USB HID v1.10 Mouse [Logitech
USB Receiver] on usb3:2.0
Jun 27 22:52:32 charlus kernel: hub.c: new USB device 00:10.1-2,
assigned address 3
Jun 27 22:52:32 charlus kernel: usb.c: USB device 3 (vend/prod
0xeaf/0x1) is not claimed by any active driver.
Jun 27 22:52:32 charlus kernel: SCSI subsystem driver Revision: 1.00
Jun 27 22:52:32 charlus kernel: hdc: attached ide-scsi driver.
Jun 27 22:52:32 charlus kernel: scsi0 : SCSI host adapter emulation for
IDE ATAPI devices
Jun 27 22:52:32 charlus kernel: Vendor: PLEXTOR Model: CD-R
PX-W1610A Rev: 1.05
Jun 27 22:52:32 charlus kernel: Type:
CD-ROM ANSI SCSI revision: 02
Jun 27 22:52:32 charlus kernel: hub.c: new USB device 00:10.0-1,
assigned address 2
Jun 27 22:52:32 charlus kernel: usb.c: USB device 2 (vend/prod
0x4b8/0x5) is not claimed by any active driver.
Jun 27 22:52:32 charlus kernel: Linux video capture interface: v1.00
Jun 27 22:52:32 charlus kernel: usb.c: registered new driver quickcam
Jun 27 22:52:32 charlus kernel: USB Quickcam Class ff SubClass ff
idVendor 46d idProduct 870
Jun 27 22:52:32 charlus kernel: USB Quickcam camera found using: $Id:
quickcam.c,v 1.111 2003/01/27 09:41:03 tuukkat Exp $
Jun 27 22:52:32 charlus kernel: quickcam: probe of HDCS1000 sensor = 08
02 id: 08
Jun 27 22:52:32 charlus kernel: quickcam: HDCS1000 sensor detected
Jun 27 22:52:32 charlus kernel: Initializing USB Mass Storage driver...
Jun 27 22:52:32 charlus kernel: usb.c: registered new driver usb-storage
Jun 27 22:52:32 charlus kernel: scsi1 : SCSI emulation for USB Mass
Storage devices
Jun 27 22:52:32 charlus kernel: Vendor: MCRW Model: CRW600
CF Rev: 2.1D
Jun 27 22:52:32 charlus kernel: Type:
Direct-Access ANSI SCSI revision: 02
Jun 27 22:52:32 charlus kernel: Vendor: MCRW Model: CRW600
MS Rev: 2.1D
Jun 27 22:52:32 charlus kernel: Type:
Direct-Access ANSI SCSI revision: 02
Jun 27 22:52:32 charlus kernel: Vendor: MCRW Model: CRW600
MMC/SD Rev: 2.1D
Jun 27 22:52:32 charlus kernel: Type:
Direct-Access ANSI SCSI revision: 02
Jun 27 22:52:32 charlus kernel: Vendor: MCRW Model: CRW600
SM Rev: 2.1D
Jun 27 22:52:32 charlus kernel: Type:
Direct-Access ANSI SCSI revision: 02
Jun 27 22:52:32 charlus kernel: USB Mass Storage support registered.
Jun 27 22:52:32 charlus kernel: Attached scsi CD-ROM sr0 at scsi0,
channel 0, id 0, lun 0
Jun 27 22:52:32 charlus kernel: sr0: scsi3-mmc drive: 40x/40x writer
cd/rw xa/form2 cdda tray
Jun 27 22:52:32 charlus kernel: usb.c: registered new driver usblp
Jun 27 22:52:32 charlus kernel: printer.c: usblp0: USB Bidirectional
printer dev 2 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005
Jun 27 22:52:32 charlus kernel: printer.c: v0.11: USB Printer Device
Class driver
Jun 27 22:52:32 charlus kernel: parport0: PC-style at 0x378 (0x778)
[PCSPP,TRISTATE]
Jun 27 22:52:32 charlus kernel: parport0: irq 7 detected
Jun 27 22:52:32 charlus kernel: ip_tables: (C) 2000-2002 Netfilter core team
Jun 27 22:52:32 charlus kernel: ip_conntrack version 2.1 (4095 buckets,
32760 max) - 292 bytes per conntrack
Jun 27 22:52:32 charlus kernel: Broadcom 4401 Ethernet Driver bcm4400
ver. 1.0.1 (08/26/02)
Jun 27 22:52:32 charlus kernel: PCI: Enabling device 00:09.0 (0004 -> 0006)
Jun 27 22:52:32 charlus kernel: PCI: Assigned IRQ 5 for device 00:09.0
Jun 27 22:52:32 charlus kernel: eth0: Broadcom BCM4401 100Base-T found
at mem d4800000, IRQ 5, node addr 00e018a7bc28
Jun 27 22:52:32 charlus autofs: automount startup succeeded
let me know if you need anything else from me !
( please cc me since i'm not on the list ).
thanks again for your help.
--
Charles-Edouard Ruault
PGP Key ID E10C24DC
next prev parent reply other threads:[~2003-07-03 22:16 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-07-03 21:34 kernel 2.4.21 , large disk write => system crawls Charles-Edouard Ruault
2003-07-03 22:02 ` Francois Romieu
2003-07-03 22:30 ` Charles-Edouard Ruault [this message]
2003-07-03 22:56 ` Mark Hahn
2003-07-03 23:06 ` Charles-Edouard Ruault
2003-07-06 17:20 ` Jakob Oestergaard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3F04AE6A.8000504@ruault.com \
--to=ce@ruault.com \
--cc=linux-kernel@vger.kernel.org \
--cc=romieu@fr.zoreil.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox