Linux version 2.6.0-test1 (crawley@joshlap.voicecomcorp.com) (gcc version 2.95.4 20011002 (Debian prerelease)) #4 Thu Jul 17 00:06:33 EST 2003
Video mode to be used for restore is f00
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0c00 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000004000000 (usable)
 BIOS-e820: 00000000ffff0c00 - 0000000100000000 (reserved)
64MB LOWMEM available.
On node 0 totalpages: 16384
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 12288 pages, LIFO batch:3
  HighMem zone: 0 pages, LIFO batch:1
ACPI: Unable to locate RSDP
Building zonelist for node : 0
Kernel command line: BOOT_IMAGE=2.5 ro root=303
Initializing CPU#0
PID hash table entries: 512 (order 9: 4096 bytes)
Detected 328.050 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 643.07 BogoMIPS
Memory: 61008k/65536k available (2082k kernel code, 4044k reserved, 1007k data, 112k init, 0k highmem)
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
-> /dev
-> /dev/console
-> /root
CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line)
CPU:     After generic, caps: 008021bf 808029bf 00000000 00000002
CPU: AMD-K6(tm) 3D processor stepping 0c
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
Initializing RT netlink socket
PCI: PCI BIOS revision 2.10 entry at 0xfdb26, last bus=0
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
BIO: pool of 256 setup, 15Kb (60 bytes/bio)
biovec pool[0]:   1 bvecs: 118 entries (12 bytes)
biovec pool[1]:   4 bvecs: 118 entries (48 bytes)
biovec pool[2]:  16 bvecs:  59 entries (192 bytes)
biovec pool[3]:  64 bvecs:  29 entries (768 bytes)
biovec pool[4]: 128 bvecs:  14 entries (1536 bytes)
biovec pool[5]: 256 bvecs:   7 entries (3072 bytes)
ACPI: Subsystem revision 20030619
tbxfroot-0324 [04] acpi_find_root_pointer: RSDP structure not found, AE_NOT_FOUND Flags=8
ACPI: System description tables not found
 tbxface-0084: *** Error: acpi_load_tables: Could not get RSDP, AE_NOT_FOUND
 tbxface-0134: *** Error: acpi_load_tables: Could not load tables: AE_NOT_FOUND
ACPI: Unable to load the System Description Tables
Linux Plug and Play Support v0.96 (c) Adam Belay
SCSI subsystem initialized
Linux Kernel Card Services 3.1.22
  options:  [pci] [cardbus] [pm]
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
ACPI: ACPI tables contain no PCI IRQ routing entries
PCI: Invalid ACPI-PCI IRQ routing table
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router OPTI [1045/c700] at 0000:00:01.0
PCI: IRQ 0 for device 0000:00:0a.0 doesn't match PIRQ mask - try pci=usepirqmask
PCI: IRQ 0 for device 0000:00:0a.1 doesn't match PIRQ mask - try pci=usepirqmask
pty: 256 Unix98 ptys configured
Journalled Block Device driver loaded
udf: registering filesystem
request_module: failed /sbin/modprobe -- parport_lowlevel. error = -16
lp: driver loaded but no devices found
Real Time Clock Driver v1.11
Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP]
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
lp0: using parport0 (polling).
anticipatory scheduling elevator
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
hda: HITACHI_DK227A-41, ATA DISK drive
hdc: TOSHIBA CD-ROM XM-1802B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 8007552 sectors (4100 MB) w/512KiB Cache, CHS=7944/16/63
 hda: hda1 hda2 hda3
hdc: ATAPI 24X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.12
ohci-hcd: 2003 Feb 24 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci-hcd: block sizes: ed 64 td 64
PCI: Found IRQ 10 for device 0000:00:13.0
ohci-hcd 0000:00:13.0: OPTi Inc. 82C861
ohci-hcd 0000:00:13.0: irq 10, pci mem c480d000
ohci-hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
ohci-hcd 0000:00:13.0: WARNING: OPTi workarounds unavailable
hub 1-0:0: USB hub found
hub 1-0:0: 2 ports detected
Initializing USB Mass Storage driver...
drivers/usb/core/usb.c: registered new driver usb-storage
USB Mass Storage support registered.
drivers/usb/core/usb.c: registered new driver hid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
pc110pad: I/O area 0x15e0-0x15e4 in use.
Synaptics Touchpad, model: 1
 Firware: 4.6
 Sensor: 15
 new absolute packet format
 Touchpad has extended capability bits
 -> four buttons
 -> multifinger detection
 -> palm detection
input: Synaptics Synaptics TouchPad on isa0060/serio1
serio: i8042 AUX port at 0x60,0x64 irq 12
input: AT Set 2 keyboard on isa0060/serio0
serio: i8042 KBD port at 0x60,0x64 irq 1
i2c /dev entries driver module version 2.7.0 (20021208)
Advanced Linux Sound Architecture Driver Version 0.9.4 (Mon Jun 09 12:01:18 2003 UTC).
request_module: failed /sbin/modprobe -- snd-card-0. error = -16
ALSA device list:
  No soundcards found.
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
UDF-fs DEBUG fs/udf/lowlevel.c:65:udf_get_last_session: CDROMMULTISESSION not supported: rc=-22
UDF-fs DEBUG fs/udf/super.c:1472:udf_fill_super: Multi-session=0
UDF-fs DEBUG fs/udf/super.c:460:udf_vrs: Starting at sector 16 (2048 byte sectors)
UDF-fs DEBUG fs/udf/super.c:1208:udf_check_valid: Failed to read byte 32768. Assuming open disc. Skipping validity check
UDF-fs DEBUG fs/udf/misc.c:286:udf_read_tagged: location mismatch block 256, tag 1986618723 != 256
UDF-fs DEBUG fs/udf/super.c:1262:udf_load_partition: No Anchor block found
UDF-fs: No partition found (1)
found reiserfs format "3.6" with standard journal
Reiserfs journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
reiserfs: checking transaction log (hda3) for (hda3)
reiserfs: replayed 2 transactions in 1 seconds
Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 112k freed
spurious 8259A interrupt: IRQ7.
Adding 245944k swap on /dev/hda2.  Priority:-1 extents:1
mtrr: 0xfd000000,0x200000 overlaps existing 0xfd000000,0x100000