public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
* 2.6.0-test4-mm2: fdisk causes Oops
@ 2003-08-29  5:12 Peter Lieverdink
  2003-08-30  5:25 ` Peter Lieverdink
  0 siblings, 1 reply; 3+ messages in thread
From: Peter Lieverdink @ 2003-08-29  5:12 UTC (permalink / raw)
  To: linux-kernel

[-- Attachment #1: Type: text/plain, Size: 324 bytes --]

Hi,

When running fdisk -l under 2.6.0-test4-mm2, the kernel oopses. dmesg,
the oops (fdisk.txt) and output from lspci are attached.

I've tried after disabling the Promise controller in the BIOS, but the
oops still occurs. Same when I specify a device instead of -l.

fdisk is from debian/unstable, version 2.11z

- Peter.

[-- Attachment #2: dmesg.txt --]
[-- Type: text/plain, Size: 14332 bytes --]

Linux version 2.6.0-test4-mm2 (root@kahlua) (gcc version 3.3.2 20030812 (Debian prerelease)) #1 Fri Aug 29 10:07:13 EST 2003
Video mode to be used for restore is f00
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
 BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
 BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f4db0
hm, page 000f4000 reserved twice.
hm, page 000f5000 reserved twice.
hm, page 000f0000 reserved twice.
hm, page 000f1000 reserved twice.
On node 0 totalpages: 262128
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 225280 pages, LIFO batch:16
  HighMem zone: 32752 pages, LIFO batch:7
DMI 2.3 present.
ACPI: RSDP (v000 GBT                                       ) @ 0x000f6730
ACPI: RSDT (v001 GBT    AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff3000
ACPI: FADT (v001 GBT    AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff3040
ACPI: MADT (v001 GBT    AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff7280
ACPI: DSDT (v001 GBT    AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:8 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] polarity[0x0] trigger[0x0] lint[0x1])
Using ACPI for processor (LAPIC) configuration information
Intel MultiProcessor Specification v1.4
    Virtual Wire compatibility mode.
OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
I/O APIC #2 Version 17 at 0xFEC00000.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Processors: 1
Building zonelist for node : 0
Kernel command line: root=/dev/hda2 pci=noacpi
current: c036c9c0
current->thread_info: c03c6000
Initializing CPU#0
PID hash table entries: 4096 (order 12: 32768 bytes)
Detected 2009.462 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 3956.73 BogoMIPS
Memory: 1033740k/1048512k available (2045k kernel code, 13832k reserved, 791k data, 368k init, 131008k highmem)
zapping low mappings.
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
-> /dev
-> /dev/console
-> /root
CPU:     After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000
CPU:     After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU:     After all inits, caps: 0383fbff c1c3fbff 00000000 00000020
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Athlon(tm) XP 2400+ stepping 01
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
ENABLING IO-APIC IRQs
Setting 2 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 2 ... ok.
init IO_APIC IRQs
 IO-APIC (apicid-pin) 2-0, 2-6, 2-7, 2-10, 2-11, 2-17, 2-20, 2-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 23.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
.......    : physical APIC id: 02
.......    : Delivery Type: 0
.......    : LTS          : 0
.... register #01: 00178003
.......     : max redirection entries: 0017
.......     : PRQ implemented: 1
.......     : IO APIC version: 0003
.... IRQ redirection table:
 NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:   
 00 000 00  1    0    0   0   0    0    0    00
 01 001 01  0    0    0   0   0    1    1    39
 02 001 01  0    0    0   0   0    1    1    31
 03 001 01  0    0    0   0   0    1    1    41
 04 001 01  0    0    0   0   0    1    1    49
 05 001 01  0    0    0   0   0    1    1    51
 06 000 00  1    0    0   0   0    0    0    00
 07 000 00  1    0    0   0   0    0    0    00
 08 001 01  0    0    0   0   0    1    1    59
 09 001 01  0    0    0   0   0    1    1    61
 0a 000 00  1    0    0   0   0    0    0    00
 0b 000 00  1    0    0   0   0    0    0    00
 0c 001 01  0    0    0   0   0    1    1    69
 0d 001 01  0    0    0   0   0    1    1    71
 0e 001 01  0    0    0   0   0    1    1    79
 0f 001 01  0    0    0   0   0    1    1    81
 10 001 01  1    1    0   1   0    1    1    89
 11 000 00  1    0    0   0   0    0    0    00
 12 001 01  1    1    0   1   0    1    1    91
 13 001 01  1    1    0   1   0    1    1    99
 14 000 00  1    0    0   0   0    0    0    00
 15 001 01  1    1    0   1   0    1    1    A1
 16 001 01  1    1    0   1   0    1    1    A9
 17 000 00  1    0    0   0   0    0    0    00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ18 -> 0:18
IRQ19 -> 0:19
IRQ21 -> 0:21
IRQ22 -> 0:22
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 2008.0925 MHz.
..... host bus clock speed is 267.0856 MHz.
PM: Adding info for No Bus:legacy
Initializing RT netlink socket
PCI: PCI BIOS revision 2.10 entry at 0xfa050, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20030813
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PM: Adding info for No Bus:pci0000:00
PM: Adding info for pci:0000:00:00.0
PM: Adding info for pci:0000:00:01.0
PM: Adding info for pci:0000:00:0a.0
PM: Adding info for pci:0000:00:0b.0
PM: Adding info for pci:0000:00:0b.1
PM: Adding info for pci:0000:00:0f.0
PM: Adding info for pci:0000:00:10.0
PM: Adding info for pci:0000:00:10.1
PM: Adding info for pci:0000:00:10.2
PM: Adding info for pci:0000:00:10.3
PM: Adding info for pci:0000:00:11.0
PM: Adding info for pci:0000:00:11.1
PM: Adding info for pci:0000:00:11.5
PM: Adding info for pci:0000:00:13.0
PM: Adding info for pci:0000:00:14.0
PM: Adding info for pci:0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 *6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [ALKA] (IRQs 20, disabled)
ACPI: PCI Interrupt Link [ALKB] (IRQs 21, disabled)
ACPI: PCI Interrupt Link [ALKC] (IRQs 22, disabled)
ACPI: PCI Interrupt Link [ALKD] (IRQs 23, disabled)
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
PCI: Probing PCI hardware
PCI: Using IRQ router VIA [1106/3177] at 0000:00:11.0
PCI->APIC IRQ transform: (B0,I10,P0) -> 18
PCI->APIC IRQ transform: (B0,I11,P0) -> 19
PCI->APIC IRQ transform: (B0,I15,P0) -> 19
PCI->APIC IRQ transform: (B0,I16,P0) -> 21
PCI->APIC IRQ transform: (B0,I16,P1) -> 21
PCI->APIC IRQ transform: (B0,I16,P2) -> 21
PCI->APIC IRQ transform: (B0,I16,P3) -> 21
PCI->APIC IRQ transform: (B0,I17,P0) -> 22
PCI->APIC IRQ transform: (B0,I17,P2) -> 22
PCI->APIC IRQ transform: (B0,I19,P0) -> 18
PCI->APIC IRQ transform: (B0,I20,P0) -> 16
PCI->APIC IRQ transform: (B1,I0,P0) -> 16
pty: 256 Unix98 ptys configured
Machine check exception polling timer started.
ikconfig 0.5 with /proc/ikconfig
highmem bounce pool size: 64 pages
PCI: Via IRQ fixup for 0000:00:10.0, from 7 to 5
PCI: Via IRQ fixup for 0000:00:10.1, from 6 to 5
PCI: Via IRQ fixup for 0000:00:10.2, from 10 to 5
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU0] (supports C1, 2 throttling states)
Real Time Clock Driver v1.11a
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected VIA Apollo Pro KT400 chipset
agpgart: Maximum main memory to use for agp memory: 941M
agpgart: AGP aperture is 256M @ 0xc0000000
Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS3 at I/O 0x2e8 (irq = 3) is a 16550A
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
0000:00:0a.0: 3Com PCI 3c905C Tornado at 0x9000. Vers LK1.1.19
Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PDC20276: IDE controller at PCI slot 0000:00:0f.0
PDC20276: chipset revision 1
PDC20276: 100% native mode on irq 19
    ide2: BM-DMA at 0xac00-0xac07, BIOS settings: hde:pio, hdf:pio
    ide3: BM-DMA at 0xac08-0xac0f, BIOS settings: hdg:pio, hdh:pio
hdg: QUANTUM SIROCCO1700A, ATA DISK drive
PM: Adding info for No Bus:ide3
hdh: SAMSUNG SV0322A, ATA DISK drive
Using anticipatory scheduling elevator
ide3 at 0xa400-0xa407,0xa802 on irq 19
PM: Adding info for ide:3.0
PM: Adding info for ide:3.1
VP_IDE: IDE controller at PCI slot 0000:00:11.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
    ide0: BM-DMA at 0xbc00-0xbc07, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xbc08-0xbc0f, BIOS settings: hdc:DMA, hdd:pio
hda: WDC WD800JB-00ETA0, ATA DISK drive
PM: Adding info for No Bus:ide0
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
PM: Adding info for ide:0.0
hdc: Pioneer DVD-ROM ATAPIModel DVD-113 0114, ATAPI CD/DVD-ROM drive
PM: Adding info for No Bus:ide1
ide1 at 0x170-0x177,0x376 on irq 15
PM: Adding info for ide:1.0
hdg: max request size: 128KiB
hdg: 3335472 sectors (1707 MB) w/75KiB Cache, CHS=3309/16/63, DMA
 hdg: hdg1 hdg2
hdh: max request size: 128KiB
hdh: 6250608 sectors (3200 MB) w/478KiB Cache, CHS=11024/9/63, UDMA(33)
 hdh:
hda: max request size: 1024KiB
hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
 hda: hda1 hda2
drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1
uhci-hcd 0000:00:10.0: UHCI Host Controller
uhci-hcd 0000:00:10.0: irq 21, io base 0000b000
uhci-hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
PM: Adding info for usb:usb1
hub 1-0:0: USB hub found
hub 1-0:0: 2 ports detected
PM: Adding info for usb:1-0:0
uhci-hcd 0000:00:10.1: UHCI Host Controller
uhci-hcd 0000:00:10.1: irq 21, io base 0000b400
uhci-hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
PM: Adding info for usb:usb2
hub 2-0:0: USB hub found
hub 2-0:0: 2 ports detected
PM: Adding info for usb:2-0:0
uhci-hcd 0000:00:10.2: UHCI Host Controller
uhci-hcd 0000:00:10.2: irq 21, io base 0000b800
uhci-hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
PM: Adding info for usb:usb3
hub 3-0:0: USB hub found
hub 3-0:0: 2 ports detected
PM: Adding info for usb:3-0:0
drivers/usb/core/usb.c: registered new driver hiddev
drivers/usb/core/usb.c: registered new driver hid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: AT Set 2 keyboard on isa0060/serio0
serio: i8042 KBD port at 0x60,0x64 irq 1
i2c /dev entries driver module version 2.7.0 (20021208)
Advanced Linux Sound Architecture Driver Version 0.9.6 (Wed Aug 20 20:27:13 2003 UTC).
request_module: failed /sbin/modprobe -- snd-card-0. error = -16
ALSA device list:
  #0: Sound Blaster Live! (rev.7) at 0x9400, irq 19
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
ip_conntrack version 2.1 (8191 buckets, 65528 max) - 160 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>.  http://snowman.net/projects/ipt_recent/
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
BIOS EDD facility v0.09 2003-Jan-22, 3 devices found
ACPI: (supports S0 S3 S4 S5)
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 368k freed
hub 1-0:0: debounce: port 2: delay 100ms stable 4 status 0x301
hub 1-0:0: new USB device on port 2, assigned address 2
PM: Adding info for usb:1-2
EXT3 FS on hda2, internal journal
ttyS1: LSR safety check engaged!
ttyS1: LSR safety check engaged!
drivers/usb/input/hid-core.c: ctrl urb status -104 received
drivers/usb/input/hid-core.c: timeout initializing reports

input: USB HID v1.00 Mouse [Logitech Inc. iFeel Mouse   ] on usb-0000:00:10.0-2
PM: Adding info for usb:1-2:0
hub 3-0:0: debounce: port 2: delay 100ms stable 4 status 0x101
hub 3-0:0: new USB device on port 2, assigned address 2
PM: Adding info for usb:3-2
hub 3-2:0: USB hub found
hub 3-2:0: 3 ports detected
PM: Adding info for usb:3-2:0
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver
hub 3-2:0: debounce: port 1: delay 100ms stable 4 status 0x101
hub 3-2:0: new USB device on port 1, assigned address 3
PM: Adding info for usb:3-2.1
input: USB HID v1.00 Keyboard [Chicony  PFU-65 USB Keyboard] on usb-0000:00:10.2-2.1
PM: Adding info for usb:3-2.1:0
hub 2-0:0: debounce: port 2: delay 100ms stable 4 status 0x101
hub 2-0:0: new USB device on port 2, assigned address 2
PM: Adding info for usb:2-2
PM: Adding info for usb:2-2:0

[-- Attachment #3: fdisk.txt --]
[-- Type: text/plain, Size: 1057 bytes --]

Unable to handle kernel NULL pointer dereference at virtual address 00000000
 printing eip:
c021a1fd
*pde = 00000000
Oops: 0000 [#1]
PREEMPT 
CPU:    0
EIP:    0060:[<c021a1fd>]    Not tainted VLI
EFLAGS: 00010246
EIP is at generic_ide_ioctl+0x30d/0x7a0
eax: 00000000   ebx: bffffb68   ecx: f7ff1040   edx: 00000000
esi: bffffb60   edi: 00000ced   ebp: f7577f68   esp: f7577f38
ds: 007b   es: 007b   ss: 0068
Process fdisk (pid: 398, threadinfo=f7576000 task=f7628670)
Stack: c0326f5f 0000064e 00000000 000b2345 c043f4a8 f7577f68 401363a8 bffffb00 
       f7577fbc f7ff1040 bffffb60 f759d0fc f7577f90 c0202a90 f7ff1040 00000301 
       bffffb60 bffffb60 00002200 00000301 f76043c0 ffffffe7 f7577fbc c016d5c4 
Call Trace:
 [<c0202a90>] blkdev_ioctl+0x90/0x3ca
 [<c016d5c4>] sys_ioctl+0xf4/0x2b0
 [<c02fe977>] syscall_call+0x7/0xb

Code: 00 00 c7 04 24 5f 6f 32 c0 e8 30 64 f0 ff 83 c3 04 83 c3 04 19 c0 39 5e 18 83 d8 00 85 c0 75 1a 8b 4d 08 31 c0 8b 75 10 8b 51 38 <8b> 12 89 56 04 31 d2 85 c0 0f 84 61 fd ff ff ba f2 ff ff ff e9 
 

[-- Attachment #4: lspci.txt --]
[-- Type: text/plain, Size: 1220 bytes --]

00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400 AGP] Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8235 PCI Bridge
00:0a.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 6c)
00:0b.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 07)
00:0b.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 07)
00:0f.0 RAID bus controller: Promise Technology, Inc. PDC20276 IDE (rev 01)
00:10.0 USB Controller: VIA Technologies, Inc. USB (rev 80)
00:10.1 USB Controller: VIA Technologies, Inc. USB (rev 80)
00:10.2 USB Controller: VIA Technologies, Inc. USB (rev 80)
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586/B/686A/B PIPC Bus Master IDE (rev 06)
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233 AC97 Audio Controller (rev 50)
00:13.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
00:14.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 46)
01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400 AGP (rev 82)

^ permalink raw reply	[flat|nested] 3+ messages in thread
end of thread, other threads:[~2003-08-31  1:09 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-08-29  5:12 2.6.0-test4-mm2: fdisk causes Oops Peter Lieverdink
2003-08-30  5:25 ` Peter Lieverdink
2003-08-31  0:57   ` 2.6.0-test4-mm2: promise again " Resident Boxholder

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox