* Re: orinoco wireless driver
[not found] ` <r0YD.Zd.21@gated-at.bofh.it>
@ 2003-09-01 23:56 ` John Weber
0 siblings, 0 replies; 6+ messages in thread
From: John Weber @ 2003-09-01 23:56 UTC (permalink / raw)
To: linux-kernel
>>My wireless card is not working in the new test4 kernel. It appears the
>>driver is broken and the card gets detected as a memory card and the
>>kernel module memory_cs tries to get loaded instead. Does anyone know
>>if there is a fix for this?
>
> humm, I saw this lots of times, care to try, after it is detected as "memory"
> to do this:
> cardctl eject
> cardctl insert
> and see if gets correctly detected this turn? works for me.
I have an Orinoco wireless card, and it is functioning perfectly with
2.6.0-test4 (without requiring the eject<->insert trick). Which archs
are affected by this?
^ permalink raw reply [flat|nested] 6+ messages in thread
* orinoco wireless driver
@ 2003-09-01 17:39 Philip Clark
2003-09-01 17:44 ` Arnaldo Carvalho de Melo
0 siblings, 1 reply; 6+ messages in thread
From: Philip Clark @ 2003-09-01 17:39 UTC (permalink / raw)
To: linux-kernel
Hi Everyone,
My wireless card is not working in the new test4 kernel. It appears the
driver is broken and the card gets detected as a memory card and the
kernel module memory_cs tries to get loaded instead. Does anyone know
if there is a fix for this?
-Phil
--
Philip J. Clark MS34 (Colorado)
tel 1-650-926-4203 SLAC, PO Box 20450
fax 1-650-926-3882 Stanford, CA 94309
pclark@slac.stanford.edu USA
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: orinoco wireless driver
2003-09-01 17:39 Philip Clark
@ 2003-09-01 17:44 ` Arnaldo Carvalho de Melo
2003-09-01 20:22 ` Henrik Persson
0 siblings, 1 reply; 6+ messages in thread
From: Arnaldo Carvalho de Melo @ 2003-09-01 17:44 UTC (permalink / raw)
To: Philip Clark; +Cc: linux-kernel
Em Mon, Sep 01, 2003 at 10:39:27AM -0700, Philip Clark escreveu:
> Hi Everyone,
>
> My wireless card is not working in the new test4 kernel. It appears the
> driver is broken and the card gets detected as a memory card and the
> kernel module memory_cs tries to get loaded instead. Does anyone know
> if there is a fix for this?
humm, I saw this lots of times, care to try, after it is detected as "memory"
to do this:
cardctl eject
cardctl insert
and see if gets correctly detected this turn? works for me.
- Arnaldo
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: orinoco wireless driver
2003-09-01 17:44 ` Arnaldo Carvalho de Melo
@ 2003-09-01 20:22 ` Henrik Persson
2003-09-01 22:00 ` Russell King
0 siblings, 1 reply; 6+ messages in thread
From: Henrik Persson @ 2003-09-01 20:22 UTC (permalink / raw)
To: Arnaldo Carvalho de Melo; +Cc: pclark, linux-kernel
On Mon, 1 Sep 2003 14:44:37 -0300
Arnaldo Carvalho de Melo <acme@conectiva.com.br> wrote:
> humm, I saw this lots of times, care to try, after it is detected as
> "memory" to do this:
>
> cardctl eject
> cardctl insert
>
> and see if gets correctly detected this turn? works for me.
And restart cardmgr a couple of times and then ejecting and inserting..
Those procedures are needed here. ;)
--
Henrik Persson nix@syndicalist.net
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: orinoco wireless driver
2003-09-01 20:22 ` Henrik Persson
@ 2003-09-01 22:00 ` Russell King
2003-09-01 22:08 ` Henrik Persson
0 siblings, 1 reply; 6+ messages in thread
From: Russell King @ 2003-09-01 22:00 UTC (permalink / raw)
To: Henrik Persson; +Cc: Arnaldo Carvalho de Melo, pclark, linux-kernel
On Mon, Sep 01, 2003 at 10:22:50PM +0200, Henrik Persson wrote:
> On Mon, 1 Sep 2003 14:44:37 -0300
> Arnaldo Carvalho de Melo <acme@conectiva.com.br> wrote:
>
> > humm, I saw this lots of times, care to try, after it is detected as
> > "memory" to do this:
> >
> > cardctl eject
> > cardctl insert
> >
> > and see if gets correctly detected this turn? works for me.
>
> And restart cardmgr a couple of times and then ejecting and inserting..
> Those procedures are needed here. ;)
Daniel Ritz was going to run some tests on his TI PCI1410 based laptop,
but last I heard he didn't find anything wrong. The mistery continues...
You might want to apply the patches on pcmcia.arm.linux.org.uk and see
if any of those help (and say which one.)
Frankly, I don't see this issue getting resolved any time soon.
--
Russell King (rmk@arm.linux.org.uk) The developer of ARM Linux
http://www.arm.linux.org.uk/personal/aboutme.html
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: orinoco wireless driver
2003-09-01 22:00 ` Russell King
@ 2003-09-01 22:08 ` Henrik Persson
0 siblings, 0 replies; 6+ messages in thread
From: Henrik Persson @ 2003-09-01 22:08 UTC (permalink / raw)
To: Russell King; +Cc: acme, pclark, linux-kernel
On Mon, 1 Sep 2003 23:00:59 +0100
Russell King <rmk@arm.linux.org.uk> wrote:
> > And restart cardmgr a couple of times and then ejecting and
> > inserting.. Those procedures are needed here. ;)
>
> Daniel Ritz was going to run some tests on his TI PCI1410 based laptop,
> but last I heard he didn't find anything wrong. The mistery
> continues...
>
> You might want to apply the patches on pcmcia.arm.linux.org.uk and see
> if any of those help (and say which one.)
>
> Frankly, I don't see this issue getting resolved any time soon.
I've tried them all. No change.
It works pretty well in 2.4.21 though. I just have to eject and reinsert
in there to get it working. And there's still the issue that i have to
insert it twice before it's detected..
--
Henrik Persson nix@syndicalist.net
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2003-09-01 23:54 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <r0Yy.Zd.7@gated-at.bofh.it>
[not found] ` <r0YD.Zd.21@gated-at.bofh.it>
2003-09-01 23:56 ` orinoco wireless driver John Weber
2003-09-01 17:39 Philip Clark
2003-09-01 17:44 ` Arnaldo Carvalho de Melo
2003-09-01 20:22 ` Henrik Persson
2003-09-01 22:00 ` Russell King
2003-09-01 22:08 ` Henrik Persson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox