Re: Linux IDE bug in 2.4.21 and 2.4.22 ?

[Phil Dibowitz <phil@ipom.com>]

Bartlomiej Zolnierkiewicz wrote:
>>But, what about the case when I built in the generic driver, but made
>>the CMD649 driver a module, and loaded it after boot. That shouldn't
>>have *changed* what ide0 and ide1 are, right? I had ide0 and ide1
>>assigned, did a modprobe, and CMD649 changed what ide0 adn ide1 where,
>>and then forgot about the previous ones.. like all of a sudden it told
>>the generic driver "no, no, you were wrong, there's no VIA chipset here,
>>go back to sleep."
> 
> 
> Hmm. please send me dmesg.
> 

I'm happy to. Assumably you want both a Dmesg of my new working kernel, 
and a dmesg of above described kernel? Note that the dmesg from the 
later kernel be before loading the CMD64X modules, because when I do 
that, I loose my hard drive. Therefore it'll look mostly like my working 
one, except with no ide2 and ide3.

I've gone ahead and posted the current working dmesg here:
http://www.phildev.net/dmesg-working

I'll have to do the non-working kernel when I get back from work. I'll 
drop a line when I get that posted.

Thanks,
-- 
Phil Dibowitz                             phil@ipom.com
Freeware and Technical Pages              Insanity Palace of Metallica
http://www.phildev.net/                   http://www.ipom.com/

"They that can give up essential liberty to obtain a little temporary
safety deserve neither liberty nor safety."
  - Benjamin Franklin, 1759