Re: PROBLEM:SCSI repeatable 2.4.22 bug

flavio
2003-09-12T11:18:21Z

I recompiled 2.4.22 with the following changes:
dma off and verbose scsi

< # CONFIG_BLK_DEV_IDEDMA_PCI is not set
< # CONFIG_IDEDMA_PCI_AUTO is not set
< # CONFIG_BLK_DEV_IDEDMA is not set
< # CONFIG_BLK_DEV_PIIX is not set
< # CONFIG_IDEDMA_AUTO is not set
< CONFIG_SR_EXTRA_DEVS=6
< CONFIG_SCSI_CONSTANTS=y
< CONFIG_SCSI_LOGGING=y

All I got was a hard freeze shortly after opening a shell in X

Please let me know if I can help further

TIA

Flavio Lombardi

log/messages shows:

Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
Sep 11 19:27:10 gundam kernel: ide: Assuming 33MHz system bus speed for
PIO modes; override with idebus=xx
Sep 11 19:27:10 gundam kernel: hda: IC25N030ATCS04-0, ATA DISK drive
Sep 11 19:27:10 gundam kernel: hdc: TOSHIBA DVD-ROM SD-R2212, ATAPI
CD/DVD-ROM drive
Sep 11 19:27:10 gundam kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Sep 11 19:27:10 gundam kernel: ide1 at 0x170-0x177,0x376 on irq 15
Sep 11 19:27:10 gundam kernel: hda: attached ide-disk driver.
Sep 11 19:27:10 gundam kernel: hda: host protected area => 1
Sep 11 19:27:10 gundam kernel: hda: 58605120 sectors (30006 MB)
w/1768KiB Cache, CHS=3648/255/63
Sep 11 19:27:10 gundam kernel: Partition check:
Sep 11 19:27:10 gundam kernel: /dev/ide/host0/bus0/target0/lun0: p1 p2
< p5 p6 p7 p8 p9 p10 p11 p12 >
...
Sep 11 19:27:10 gundam kernel: hdc: attached ide-scsi driver.
Sep 11 19:27:10 gundam kernel: scsi0 : SCSI host adapter emulation for
IDE ATAPI devices
Sep 11 19:27:10 gundam kernel: Vendor: TOSHIBA Model: DVD-ROM
SD-R2212 Rev: 1F15
Sep 11 19:27:10 gundam kernel: Type: CD-ROM
ANSI SCSI revision: 02