* PROBLEM: kernel BUG at ide-iops.c:1262! after DMA timeout with 2.4.21
@ 2003-09-13 9:20 Kurt Huwig
0 siblings, 0 replies; only message in thread
From: Kurt Huwig @ 2003-09-13 9:20 UTC (permalink / raw)
To: linux-kernel
[-- Attachment #1.1: Type: text/plain, Size: 17582 bytes --]
[1.] One line summary of the problem:
My machine freezes while burning CDs after a DMA timeout
[2.] Full description of the problem/report:
On my machine 'setiathome' runs niced in the background. I burn CDs
using cdrdao on an ATAPI 32x burner with ide-scsi. I get DMA timeouts
and then SCSI reset. I guess it is due to heat problems of the CD
writer, as it does happen after about 10 CDs have been burned and then
can be repeated by resetting the machine and immediately burning another
cd. Nevertheless, the machine runs stable for all other purposes, like
kernel compilation and video encoding.
[3.] Keywords (i.e., modules, networking, kernel):
ide-scsi, dma timeout
[4.] Kernel version (from /proc/version):
Linux lobo 2.4.21 #1 Fri Jul 25 21:46:23 CEST 2003 i686 unknown
[5.] Output of Oops.. message (if applicable) with symbolic information
resolved (see Documentation/oops-tracing.txt)
see attached 'ksymoops.txt'
[6.] A small shell script or example program which triggers the
problem (if possible)
n/a
[7.] Environment
[7.1.] Software (add the output of the ver_linux script here)
Linux lobo 2.4.21 #1 Fri Jul 25 21:46:23 CEST 2003 i686 unknown
Gnu C 2.95.4
Gnu make 3.79.1
util-linux 2.11n
mount 2.11n
modutils 2.4.15
e2fsprogs 1.27
Linux C Library 2.2.5
Dynamic linker (ldd) 2.2.5
Procps 2.0.7
Net-tools 1.60
Console-tools 0.2.3
Sh-utils 2.0.11
Modules Loaded nfsd lp hid nfs lockd sunrpc 8139too uhci
ehci-hcd serial isa-pnp parport_pc pt_drv parport usbnet cdfs ide-scsi
scsi_mod cmpci soundcore usbmouse mousedev keybdev usbkbd usbcore input
rtc reiserfs isofs vfat fat ext2 ide-disk ide-probe-mod ext3 jbd
via82cxxx ide-mod
[7.2.] Processor information (from /proc/cpuinfo):
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 6
model name : AMD Athlon(TM) XP 2100+
stepping : 2
cpu MHz : 1735.486
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 mmx fxsr sse syscall mmxext 3dnowext 3dnow
bogomips : 3460.30
[7.3.] Module information (from /proc/modules):
nfsd 68544 0 (autoclean)
lp 7008 0 (autoclean)
hid 19488 0 (unused)
nfs 65468 2 (autoclean)
lockd 48864 1 (autoclean) [nfsd nfs]
sunrpc 61108 1 (autoclean) [nfsd nfs lockd]
8139too 16320 1 (autoclean)
uhci 24136 0 (unused)
ehci-hcd 15552 0 (unused)
serial 45440 0 (autoclean)
isa-pnp 28796 0 (autoclean) [serial]
parport_pc 25128 2 (autoclean)
pt_drv 107616 0 (unused)
parport 23328 2 [lp parport_pc pt_drv]
usbnet 12360 0 (unused)
cdfs 20264 0 (unused)
ide-scsi 9120 0
scsi_mod 92456 1 [ide-scsi]
cmpci 30416 0 (unused)
soundcore 3588 4 [cmpci]
usbmouse 1856 0 (unused)
mousedev 3936 1
keybdev 1728 0 (unused)
usbkbd 2944 0 (unused)
usbcore 57184 1 [hid uhci ehci-hcd usbnet usbmouse usbkbd]
input 3392 0 [hid usbmouse mousedev keybdev usbkbd]
rtc 6012 0 (autoclean)
reiserfs 165024 1 (autoclean)
isofs 25056 0 (autoclean)
vfat 9564 0 (autoclean)
fat 29944 0 (autoclean) [vfat]
ext2 31648 0 (autoclean)
ide-disk 13092 2 (autoclean)
ide-probe-mod 9872 0 (autoclean)
ext3 58080 0 (autoclean)
jbd 36968 0 (autoclean) [ext3]
via82cxxx 10332 1 (autoclean)
ide-mod 88940 2 (autoclean) [ide-scsi ide-disk
ide-probe-mod via82cxxx]
[7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem)
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial(set)
0330-0331 : cmpci Midi
0376-0376 : ide1
0378-037a : parport0
0388-038b : cmpci FM
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(set)
0cf8-0cff : PCI conf1
a800-a81f : VIA Technologies, Inc. USB (#4)
a800-a81f : usb-uhci
b000-b01f : VIA Technologies, Inc. USB (#3)
b000-b01f : usb-uhci
b400-b40f : VIA Technologies, Inc. VT82C586B PIPC Bus Master IDE
b400-b407 : ide0
b408-b40f : ide1
b800-b8ff : Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+
b800-b8ff : 8139too
d000-d01f : VIA Technologies, Inc. USB (#2)
d000-d01f : usb-uhci
d400-d41f : VIA Technologies, Inc. USB
d400-d41f : usb-uhci
d800-d8ff : C-Media Electronics Inc CM8738
d800-d8ff : cmpci
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-1fffbfff : System RAM
00100000-001f407d : Kernel code
001f407e-0025d7df : Kernel data
1fffc000-1fffefff : ACPI Tables
1ffff000-1fffffff : ACPI Non-volatile Storage
d5000000-d50000ff : Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+
d5000000-d50000ff : 8139too
d5800000-d58000ff : VIA Technologies, Inc. USB 2.0
d5800000-d58000ff : ehci-hcd
d6000000-d7efffff : PCI Bus #01
d6000000-d6ffffff : nVidia Corporation NV11 [GeForce2 MX]
d7f00000-dfffffff : PCI Bus #01
d8000000-dfffffff : nVidia Corporation NV11 [GeForce2 MX]
e0000000-e3ffffff : VIA Technologies, Inc. VT8367 [KT266]
fec00000-fec00fff : reserved
fee00000-fee00fff : reserved
ffff0000-ffffffff : reserved
[7.5.] PCI information ('lspci -vvv' as root)
00:00.0 Host bridge: VIA Technologies, Inc. VT8367 [KT266]
Subsystem: Asustek Computer, Inc.: Unknown device 807f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 2.0
Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:01.0 PCI bridge: VIA Technologies, Inc. VT8367 [KT266 AGP] (prog-if
00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000dfff
Memory behind bridge: d6000000-d7efffff
Prefetchable memory behind bridge: d7f00000-dfffffff
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:05.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
Subsystem: Asustek Computer, Inc.: Unknown device 80e2
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 6000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at d800 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:09.0 USB Controller: VIA Technologies, Inc. UHCI USB (rev 50)
(prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 8080
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin A routed to IRQ 12
Region 4: I/O ports at d400 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:09.1 USB Controller: VIA Technologies, Inc. UHCI USB (rev 50)
(prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 8080
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin B routed to IRQ 11
Region 4: I/O ports at d000 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:09.2 USB Controller: VIA Technologies, Inc.: Unknown device 3104 (rev
51) (prog-if 20)
Subsystem: Asustek Computer, Inc.: Unknown device 8080
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 10
Interrupt: pin C routed to IRQ 10
Region 0: Memory at d5800000 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0e.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139
(rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RT8139
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at b800 [size=256]
Region 1: Memory at d5000000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.0 ISA bridge: VIA Technologies, Inc.: Unknown device 3147
Subsystem: Asustek Computer, Inc.: Unknown device 808c
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06)
(prog-if 8a [Master SecP PriP])
Subsystem: Asustek Computer, Inc.: Unknown device 808c
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 0
Region 4: I/O ports at b400 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.2 USB Controller: VIA Technologies, Inc. UHCI USB (rev 23)
(prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 808c
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin D routed to IRQ 5
Region 4: I/O ports at b000 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.3 USB Controller: VIA Technologies, Inc. UHCI USB (rev 23)
(prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 808c
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin D routed to IRQ 5
Region 4: I/O ports at a800 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller: nVidia Corporation NV11 (GeForce2 MX)
(rev b2) (prog-if 00 [VGA])
Subsystem: Elsa AG: Unknown device 0c64
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at d6000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d8000000 (32-bit, prefetchable) [size=128M]
Expansion ROM at d7ff0000 [disabled] [size=64K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 2.0
Status: RQ=31 SBA- 64bit- FW+ Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
[7.6.] SCSI information (from /proc/scsi/scsi)
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: HL-DT-ST Model: CD-RW GCE-8320B Rev: 1.04
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 01 Lun: 00
Vendor: MT1316B Model: BDV212B Rev: 0p40
Type: CD-ROM ANSI SCSI revision: 02
[7.7.] Other information that might be relevant to the problem
(please look in /proc and include all information that you
think to be relevant):
lobo:~# cat /proc/ide/via
----------VIA BusMastering IDE Configuration----------------
Driver Version: 3.37
South Bridge: VIA vt8233a
Revision: ISA 0x0 IDE 0x6
Highest DMA rate: UDMA133
BM-DMA base: 0xb400
PCI clock: 33.3MHz
Master Read Cycle IRDY: 0ws
Master Write Cycle IRDY: 0ws
BM IDE Status Register Read Retry: yes
Max DRDY Pulse Width: No limit
-----------------------Primary IDE-------Secondary IDE------
Read DMA FIFO flush: yes yes
End Sector FIFO flush: no no
Prefetch Buffer: yes no
Post Write Buffer: yes no
Enabled: yes yes
Simplex only: no no
Cable Type: 80w 80w
-------------------drive0----drive1----drive2----drive3-----
Transfer Mode: UDMA PIO DMA UDMA
Address Setup: 120ns 120ns 120ns 120ns
Cmd Active: 90ns 90ns 90ns 90ns
Cmd Recovery: 30ns 30ns 30ns 30ns
Data Active: 90ns 330ns 90ns 90ns
Data Recovery: 30ns 270ns 30ns 30ns
Cycle Time: 22ns 600ns 120ns 60ns
Transfer Rate: 88.8MB/s 3.3MB/s 16.6MB/s 33.3MB/s
[X.] Other notes, patches, fixes, workarounds:
CD writer is /dev/hdc.
Please respond via private mail too, as I am not subscribed to lkml.
Thanks,
Kurt
--
Kurt Huwig iKu Systemhaus AG http://www.iku-ag.de/
Vorstand Am Römerkastell 4 Telefon 0681/96751-0
66121 Saarbrücken Telefax 0681/96751-66
GnuPG 1024D/99DD9468 64B1 0C5B 82BC E16E 8940 EB6D 4C32 F908 99DD 9468
[-- Attachment #1.2: ksymoops.txt --]
[-- Type: text/plain, Size: 4302 bytes --]
ksymoops 2.4.5 on i686 2.4.21. Options used
-V (default)
-k 20030913102954.ksyms (specified)
-l 20030913102954.modules (specified)
-o /lib/modules/2.4.21/ (default)
-m /boot/System.map-2.4.21 (default)
Warning (expand_objects): object /lib/modules/2.4.21/kernel/fs/reiserfs/reiserfs.o for module reiserfs has changed since load
Warning (expand_objects): object /lib/modules/2.4.21/kernel/fs/isofs/isofs.o for module isofs has changed since load
Warning (expand_objects): object /lib/modules/2.4.21/kernel/fs/vfat/vfat.o for module vfat has changed since load
Warning (expand_objects): object /lib/modules/2.4.21/kernel/fs/fat/fat.o for module fat has changed since load
Warning (expand_objects): object /lib/modules/2.4.21/kernel/fs/ext2/ext2.o for module ext2 has changed since load
Warning (expand_objects): object /lib/modules/2.4.21/kernel/drivers/ide/ide-disk.o for module ide-disk has changed since load
Warning (expand_objects): object /lib/modules/2.4.21/kernel/drivers/ide/ide-probe-mod.o for module ide-probe-mod has changed since load
Warning (expand_objects): object /lib/modules/2.4.21/kernel/fs/ext3/ext3.o for module ext3 has changed since load
Warning (expand_objects): object /lib/modules/2.4.21/kernel/fs/jbd/jbd.o for module jbd has changed since load
Warning (expand_objects): object /lib/modules/2.4.21/kernel/drivers/ide/pci/via82cxxx.o for module via82cxxx has changed since load
Warning (expand_objects): object /lib/modules/2.4.21/kernel/drivers/ide/ide-mod.o for module ide-mod has changed since load
kernel BUG at ide-iops.c:1262!
CPU: 0
EIP: 0010:[<e080e5c3>] Not tainted
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 0010082
eax: c15e9280 ebx: 00000000 ecx: dbff5f6c edx: 00000002
esi: 00000000 edi: e0820344 ebp: e0820294 esp: dbff5ed4
ds: 0018 es: 0018 ss: 0018
Process setiathome (pid: 735, stackpage=dbff5000)
Stack: 00000000 00000000 dfee35c0 d7a0f800 c15e9280 00000086 e080e78c e0820344
00000000 e09b17a6 e0820344 e099f0bc d7a0f800 00000002 d7a0f800 00000282
00000000 c027c240 00000000 e099e659 d7a0f800 00000002 e09aaec0 00000000
Call Trace: [<e080e78c>] [<e0820344>] [<e09b17a6>] [<e0820344>] [<e099f0bc>]
[<e099e659>] [<e09aaec0>] [<e099e600>] [<c01201fc>] [<c011cbea>] [<c011cb16>]
[<c011c90a>] [<c0109e0d>] [<c010c078>]
Code: 0f 0b ee 04 7a a3 81 e0 90 8d 74 26 00 80 bf 09 01 00 00 20
>>EIP; e080e5c3 <[ide-mod]__kstrtab___ide_dma_write+5/1a> <=====
>>eax; c15e9280 <_end+133306c/20556dec>
>>ecx; dbff5f6c <_end+1bd3fd58/20556dec>
>>edi; e0820344 <[ide-mod]ide_hwifs+524/2c88>
>>ebp; e0820294 <[ide-mod]ide_hwifs+474/2c88>
>>esp; dbff5ed4 <_end+1bd3fcc0/20556dec>
Trace; e080e78c <[ide-mod]ide_do_reset+c/10>
Trace; e0820344 <[ide-mod]ide_hwifs+524/2c88>
Trace; e09b17a6 <[ide-scsi]idescsi_reset+16/20>
Trace; e0820344 <[ide-mod]ide_hwifs+524/2c88>
Trace; e099f0bc <[scsi_mod]scsi_reset+dc/340>
Trace; e099e659 <[scsi_mod]scsi_old_times_out+59/110>
Trace; e09aaec0 <[scsi_mod]RCSid+aa0/1080>
Trace; e099e600 <[scsi_mod]scsi_old_times_out+0/110>
Trace; c01201fc <timer_bh+24c/370>
Trace; c011cbea <bh_action+1a/50>
Trace; c011cb16 <tasklet_hi_action+46/70>
Trace; c011c90a <do_softirq+5a/b0>
Trace; c0109e0d <do_IRQ+9d/b0>
Trace; c010c078 <call_do_IRQ+5/d>
Code; e080e5c3 <[ide-mod]__kstrtab___ide_dma_write+5/1a>
00000000 <_EIP>:
Code; e080e5c3 <[ide-mod]__kstrtab___ide_dma_write+5/1a> <=====
0: 0f 0b ud2a <=====
Code; e080e5c5 <[ide-mod]__kstrtab___ide_dma_write+7/1a>
2: ee out %al,(%dx)
Code; e080e5c6 <[ide-mod]__kstrtab___ide_dma_write+8/1a>
3: 04 7a add $0x7a,%al
Code; e080e5c8 <[ide-mod]__kstrtab___ide_dma_write+a/1a>
5: a3 81 e0 90 8d mov %eax,0x8d90e081
Code; e080e5cd <[ide-mod]__kstrtab___ide_dma_write+f/1a>
a: 74 26 je 32 <_EIP+0x32> e080e5f5 <[ide-mod]__kstrtab___ide_dma_end+3/18>
Code; e080e5cf <[ide-mod]__kstrtab___ide_dma_write+11/1a>
c: 00 80 bf 09 01 00 add %al,0x109bf(%eax)
Code; e080e5d5 <[ide-mod]__kstrtab___ide_dma_write+17/1a>
12: 00 20 add %ah,(%eax)
Kernel panic: Aiee, killing interrupt handler!
11 warnings issued. Results may not be reliable.
[-- Attachment #2: Type: application/pgp-signature, Size: 252 bytes --]
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2003-09-13 9:20 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-09-13 9:20 PROBLEM: kernel BUG at ide-iops.c:1262! after DMA timeout with 2.4.21 Kurt Huwig
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox