From: Ben Peddell <killer.lightspeed@bigpond.com>
To: lkml <linux-kernel@vger.kernel.org>
Subject: Re: Problem with PIO with ide-scsi in Kernel 2.4.22
Date: Sun, 21 Sep 2003 22:17:51 +1000 [thread overview]
Message-ID: <3F6D96EF.90502@bigpond.com> (raw)
In-Reply-To: fa.clonccb.r5kr2d@ifi.uio.no
Ben Peddell wrote:
> I've had a problem with the ide-scsi (ATAPI SCSI emulation) module with
> Linux 2.4.22.
>
> When I disable DMA and read the CD-ROM, it reads a random amount up to
> about 1MB, and then has a timeout.
> This never happened with linux-2.4.19-16mdk. I have even tried feeding
> the old settings into the configurator, but without success.
> Here, I've set the log level to 9:
>
I just had the problem again (didn't freeze the machine this time - I
was in X).
I tried to list the contents of a CD-ROM, and the program was frozen,
not accepting any signals. So, I hdparm'ed the CD-ROM drive, and found
that DMA had been disabled.
So, I re-enabled DMA, but shortly thereafter, something disabled DMA again.
hdc: DMA disabled
I had to kill ls, and finally was able to re-enable DMA without it being
disabled again.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
scsi : aborting command due to timeout : pid 119, scsi0, channel 0, id
0, lun 0 Read TOC 00 00 00 00 00 00 00 0c 00
hdc: irq timeout: status=0xd0 { Busy }
hdc: DMA disabled
hdc: ATAPI reset complete
scsi : aborting command due to timeout : pid 120, scsi0, channel 0, id
0, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 120) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
SCSI host 0 channel 0 reset (pid 120) timed out - trying harder
SCSI bus is being reset for host 0 channel 0.
hdc: irq timeout: status=0xd0 { Busy }
hdc: ATAPI reset complete
hdc: irq timeout: status=0xc0 { Busy }
hdc: ATAPI reset complete
hdc: irq timeout: status=0xc0 { Busy }
scsi : aborting command due to timeout : pid 121, scsi0, channel 0, id
0, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 121) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
SCSI host 0 channel 0 reset (pid 121) timed out - trying harder
SCSI bus is being reset for host 0 channel 0.
hdc: irq timeout: status=0xd0 { Busy }
hdc: ATAPI reset complete
hdc: irq timeout: status=0xc0 { Busy }
hdc: ATAPI reset complete
hdc: irq timeout: status=0xc0 { Busy }
scsi : aborting command due to timeout : pid 122, scsi0, channel 0, id
0, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 122) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
SCSI host 0 channel 0 reset (pid 122) timed out - trying harder
SCSI bus is being reset for host 0 channel 0.
hdc: irq timeout: status=0xd0 { Busy }
hdc: ATAPI reset complete
hdc: irq timeout: status=0xc0 { Busy }
hdc: ATAPI reset complete
hdc: irq timeout: status=0xc0 { Busy }
sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
sr00:00: old sense key None
Non-extended sense class 0 code 0x0
scsi : aborting command due to timeout : pid 124, scsi0, channel 0, id
0, lun 0 Request Sense 00 00 00 40 00
hdc: irq timeout: status=0xd0 { Busy }
hdc: ATAPI reset complete
hdc: irq timeout: status=0xc0 { Busy }
hdc: ATAPI reset complete
hdc: irq timeout: status=0xc0 { Busy }
scsi : aborting command due to timeout : pid 125, scsi0, channel 0, id
0, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 125) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
SCSI host 0 channel 0 reset (pid 125) timed out - trying harder
SCSI bus is being reset for host 0 channel 0.
hdc: irq timeout: status=0xd0 { Busy }
hdc: ATAPI reset complete
hdc: irq timeout: status=0xc0 { Busy }
hdc: ATAPI reset complete
hdc: irq timeout: status=0xc0 { Busy }
hdc: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error }
hdc: set_drive_speed_status: error=0xb4
scsi : aborting command due to timeout : pid 126, scsi0, channel 0, id
0, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 126) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
SCSI host 0 channel 0 reset (pid 126) timed out - trying harder
SCSI bus is being reset for host 0 channel 0.
hdc: lost interrupt
scsi : aborting command due to timeout : pid 129, scsi0, channel 0, id
0, lun 0 Read TOC 00 00 00 00 00 00 00 0c 40
hdc: irq timeout: status=0xd0 { Busy }
hdc: DMA disabled
hdc: ATAPI reset complete
hdc: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error }
hdc: set_drive_speed_status: error=0xb4
scsi : aborting command due to timeout : pid 130, scsi0, channel 0, id
0, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 130) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
SCSI host 0 channel 0 reset (pid 130) timed out - trying harder
SCSI bus is being reset for host 0 channel 0.
hdc: lost interrupt
sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 40
sr00:00: old sense key None
Non-extended sense class 0 code 0x0
scsi : aborting command due to timeout : pid 134, scsi0, channel 0, id
0, lun 0 Request Sense 00 00 00 40 00
hdc: irq timeout: status=0xd0 { Busy }
hdc: DMA disabled
hdc: ATAPI reset complete
hdc: irq timeout: status=0xd0 { Busy }
hdc: ATAPI reset complete
hdc: irq timeout: status=0xc0 { Busy }
scsi0 channel 0 : resetting for second half of retries.
SCSI bus is being reset for host 0 channel 0.
hdc: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error }
hdc: set_drive_speed_status: error=0xb4
scsi : aborting command due to timeout : pid 135, scsi0, channel 0, id
0, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 135) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
SCSI host 0 channel 0 reset (pid 135) timed out - trying harder
SCSI bus is being reset for host 0 channel 0.
hdc: lost interrupt
sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
sr00:00: old sense key None
Non-extended sense class 0 code 0x0
scsi : aborting command due to timeout : pid 137, scsi0, channel 0, id
0, lun 0 Read Capacity 00 00 00 00 00 00 00 00 00
hdc: irq timeout: status=0xd0 { Busy }
hdc: DMA disabled
hdc: ATAPI reset complete
next parent reply other threads:[~2003-09-21 12:19 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <fa.clonccb.r5kr2d@ifi.uio.no>
2003-09-21 12:17 ` Ben Peddell [this message]
2003-09-20 20:23 Problem with PIO with ide-scsi in Kernel 2.4.22 Ben Peddell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3F6D96EF.90502@bigpond.com \
--to=killer.lightspeed@bigpond.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox