From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S261509AbTI3O2u (ORCPT ); Tue, 30 Sep 2003 10:28:50 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S261537AbTI3O2u (ORCPT ); Tue, 30 Sep 2003 10:28:50 -0400 Received: from cluster13.lmt.lv ([212.93.96.74]:51153 "EHLO cluster13.lmt.lv") by vger.kernel.org with ESMTP id S261509AbTI3O2e (ORCPT ); Tue, 30 Sep 2003 10:28:34 -0400 Message-ID: <3F79930E.4090009@lmt.lv> Date: Tue, 30 Sep 2003 17:28:30 +0300 From: Andrejs Dubovskis User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.4) Gecko/20030624 Netscape/7.1 (ax) X-Accept-Language: en, ru MIME-Version: 1.0 To: linux-kernel@vger.kernel.org Subject: linux-2.6.0-test6 and apm Content-Type: multipart/mixed; boundary="------------090800060208060507060908" Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org This is a multi-part message in MIME format. --------------090800060208060507060908 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Hi! I have installed last kernel on ThinkPad T40, Redhat 9.0 and found problem with apm module (the same problem was on 2.6-test5 too). To minimize other program influence I have loaded system in single mode (no daemons and network) and executed following two commands: # modprobe apm # modprobe -r apm When running second comand (module unloading) I got an Oops. Oops description and other requested information are attached. Regards, -- Andrejs (to reply remove .nospam) Unable to handle kernel paging request at virtual address d08b643c printing eip: d08b643c *pde = 0134a067 *pte = 00000000 Oops: 0000 [#1] CPU: 0 EIP: 0060:[] Not tainted EFLAGS: 00010246 EIP is at 0xd08b643c eax: 00000000 ebx: fffc5016 ecx: 00000000 edx: 00000000 esi: c0398000 edi: 00000010 ebp: c0399fc4 esp: c0399fb0 ds: 007b es: 007b ss: 0068 Process swapper (pid: 0, threadinfo=c0398000 task=c031e080) Stack: c0398000 00000001 c0398000 c01070c9 c0105000 c0399fd4 c0107161 c0398000 00099800 c0399ff8 c039a6bd c031e080 00000000 c03b45c8 00000007 c039a43f c03b9d80 00000816 0008e000 c010017e Call Trace: [] default_idle+0x0/0x2c [] rest_init+0x0/0x61 [] cpu_idle+0x31/0x3a [] start_kernel+0x150/0x15d [] unknown_bootoption+0x0/0xfa Code: Bad EIP value. <0>Kernel panic: Attempted to kill the idle task! In idle task - not syncing --------------090800060208060507060908 Content-Type: text/plain; name="general.txt" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="general.txt" # cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 9 model name : Intel(R) Pentium(R) M processor 1500MHz stepping : 5 cpu MHz : 1495.485 cache size : 1024 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr mce cx8 apic sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 tm pbe tm2 est bogomips : 2957.31 # ver_linux If some fields are empty or look unusual you may have an old version. Compare to the current minimal requirements in Documentation/Changes. Linux adunb.td.lmt.lv 2.6.0-test6 #1 Tue Sep 30 16:05:55 EEST 2003 i686 i686 i386 GNU/Linux Gnu C 3.2.2 Gnu make 3.79.1 util-linux 2.11y mount 2.11y e2fsprogs 1.32 jfsutils 1.0.17 reiserfsprogs 3.6.4 pcmcia-cs 3.1.31 quota-tools 3.06. PPP 2.4.1 isdn4k-utils 3.1pre4 nfs-utils 1.0.1 Linux C Library 2.3.2 Dynamic linker (ldd) 2.3.2 Procps 2.0.11 Net-tools 1.60 Kbd 1.08 Sh-utils 4.5.3 Modules Loaded rtc Linux version 2.6.0-test6 (andrejs@adunb.td.lmt.lv) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Tue Sep 30 16:05:55 EEST 2003 # cat /proc/modules rtc 10920 1 - Live 0xd0872000 # cat /proc/ioports 0000-001f : dma1 0020-0021 : pic1 0040-005f : timer 0060-006f : keyboard 0070-0077 : rtc 0080-008f : dma page reg 00a0-00a1 : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : ide1 01f0-01f7 : ide0 02f8-02ff : serial 0376-0376 : ide1 03c0-03df : vga+ 03f6-03f6 : ide0 0cf8-0cff : PCI conf1 1800-181f : 0000:00:1d.0 1800-181f : uhci-hcd 1820-183f : 0000:00:1d.1 1820-183f : uhci-hcd 1840-185f : 0000:00:1d.2 1840-185f : uhci-hcd 1860-186f : 0000:00:1f.1 1860-1867 : ide0 1868-186f : ide1 1880-189f : 0000:00:1f.3 18c0-18ff : 0000:00:1f.5 1c00-1cff : 0000:00:1f.5 2000-207f : 0000:00:1f.6 2400-24ff : 0000:00:1f.6 3000-3fff : PCI Bus #01 3000-30ff : 0000:01:00.0 8000-803f : 0000:02:01.0 8000-803f : e1000 9000-900f : 0000:09:01.0 9010-9013 : 0000:09:01.0 9014-9017 : 0000:09:01.0 9018-901f : 0000:09:01.0 9020-9027 : 0000:09:01.0 # cat /proc/iomem 00000000-0009efff : System RAM 0009f000-0009ffff : reserved 000a0000-000bffff : Video RAM area 000d0000-000d0fff : Extension ROM 000d1000-000d1fff : Extension ROM 000d2000-000d3fff : reserved 000e0000-000effff : Extension ROM 000f0000-000fffff : System ROM 00100000-0ff4ffff : System RAM 00100000-002d8bdf : Kernel code 002d8be0-00396d7f : Kernel data 0ff50000-0ff68fff : ACPI Tables 0ff69000-0ff7afff : ACPI Non-volatile Storage 0ff80000-0fffffff : reserved 10000000-100003ff : 0000:00:1f.1 b0000000-b0000fff : 0000:02:00.0 b1000000-b1000fff : 0000:02:00.1 b2000000-b2000fff : 0000:09:02.0 b3000000-b3000fff : 0000:09:02.1 c0000000-c00003ff : 0000:00:1d.7 c0000000-c00003ff : ehci_hcd c0000800-c00008ff : 0000:00:1f.5 c0000800-c00008ff : Intel 82801DB-ICH4 - Controller c0000c00-c0000dff : 0000:00:1f.5 c0000c00-c0000dff : Intel 82801DB-ICH4 - AC'97 c0100000-c01fffff : PCI Bus #01 c0100000-c010ffff : 0000:01:00.0 c0200000-c020ffff : 0000:02:01.0 c0200000-c020ffff : e1000 c0210000-c0210fff : 0000:02:02.0 c0220000-c023ffff : 0000:02:01.0 c0220000-c023ffff : e1000 d0000000-dfffffff : 0000:00:00.0 e0000000-e7ffffff : PCI Bus #01 e0000000-e7ffffff : 0000:01:00.0 ff800000-ffffffff : reserved # lspci -vvv 00:00.0 Host bridge: Intel Corp.: Unknown device 3340 (rev 03) Subsystem: IBM: Unknown device 0529 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- Reset- FastB2B- 00:1d.0 USB Controller: Intel Corp. 82801DB USB (Hub #1) (rev 01) (prog-if 00 [UHCI]) Subsystem: IBM: Unknown device 052d Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- Reset- FastB2B- 00:1f.0 ISA bridge: Intel Corp.: Unknown device 24cc (rev 01) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- Region 1: I/O ports at Region 2: I/O ports at Region 3: I/O ports at Region 4: I/O ports at 1860 [size=16] Region 5: Memory at 10000000 (32-bit, non-prefetchable) [size=1K] 00:1f.3 SMBus: Intel Corp. 82801DB SMBus (rev 01) Subsystem: IBM: Unknown device 052d Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- [disabled] [size=128K] Capabilities: [58] AGP version 2.0 Status: RQ=47 SBA+ 64bit- FW- Rate=x1,x2,x4 Command: RQ=0 SBA+ AGP- 64bit- FW- Rate= Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 02:00.0 CardBus bridge: Texas Instruments PCI1250 PC card Cardbus Controller (rev 01) Subsystem: IBM ThinkPad T30 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Reset+ 16bInt+ PostWrite- 16-bit legacy interface ports at 0001 02:00.1 CardBus bridge: Texas Instruments PCI1250 PC card Cardbus Controller (rev 01) Subsystem: IBM ThinkPad T30 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Reset+ 16bInt+ PostWrite- 16-bit legacy interface ports at 0001 02:01.0 Ethernet controller: Intel Corp.: Unknown device 101e (rev 03) Subsystem: IBM: Unknown device 0549 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- [disabled] [size=64K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=1 PME- Capabilities: [f0] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 02:02.0 Network controller: Intel Corp.: Unknown device 1043 (rev 04) Subsystem: Intel Corp.: Unknown device 2551 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- Reset- FastB2B- Capabilities: [80] Power Management version 1 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Bridge: PM- B3+ 09:01.0 IDE interface: CMD Technology Inc PCI0648 (rev 01) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: CMD Technology Inc PCI0648 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- Reset+ 16bInt+ PostWrite- 16-bit legacy interface ports at 0001 09:02.1 CardBus bridge: Texas Instruments PCI1420 Subsystem: IBM: Unknown device 0148 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Reset+ 16bInt+ PostWrite- 16-bit legacy interface ports at 0001 --------------090800060208060507060908--