From: Jeff Garzik <jgarzik@pobox.com>
To: Martin List-Petersen <martin@list-petersen.se>
Cc: Andrew Marold <andrew.marold@wlm.edial.com>,
linux-kernel@vger.kernel.org, Alan Cox <alan@lxorguk.ukuu.org.uk>,
Bernhard Rosenkraenzer <bero@arklinux.org>
Subject: Re: Serial ATA on Dell Dimension 8300 (Was: Re: Serial ATA support in 2.4.22)
Date: Thu, 02 Oct 2003 17:47:43 -0400 [thread overview]
Message-ID: <3F7C9CFF.8090002@pobox.com> (raw)
In-Reply-To: <1065130970.5842.193.camel@loke>
Martin List-Petersen wrote:
> I simply can't figure out, whats wrong here.
The last line gives it away...
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> ICH5: IDE controller at PCI slot 00:1f.1
> ICH5: chipset revision 2
> ICH5: not 100% native mode: will probe irqs later
> ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
> ICH5-SATA: IDE controller at PCI slot 00:1f.2
> ICH5-SATA: chipset revision 2
> ICH5-SATA: 100% native mode on irq 18
> ide0: BM-DMA at 0xfea0-0xfea7, BIOS settings: hda:DMA, hdb:pio
> hda: ST3120026AS, ATA DISK drive
> hdb: probing with STATUS(0x00) instead of ALTSTATUS(0x50)
> hdb: probing with STATUS(0x00) instead of ALTSTATUS(0x50)
> blk: queue c041d460, I/O limit 4095Mb (mask 0xffffffff)
> hdc: SAMSUNG DVD-ROM SD-616T, ATAPI CD/DVD-ROM drive
> hdd: _NEC DVD+RW ND-1100A, ATAPI CD/DVD-ROM drive
> ide0 at 0xfe00-0xfe07,0xfe12 on irq 18
> ide1 at 0x170-0x177,0x376 on irq 15
> hda: attached ide-disk driver.
> hda: host protected area => 1
> hda: 234375000 sectors (120000 MB) w/8192KiB Cache, CHS=14589/255/63, UDMA(33)
> hdc: attached ide-cdrom driver.
> hdc: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
> Uniform CD-ROM driver Revision: 3.12
> hdd: attached ide-cdrom driver.
> hdd: ATAPI 40X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
> Partition check:
> /dev/ide/host0/bus0/target0/lun0: p1 p2
> Please append a correct "root=" boot option
> Kernel panic: VFS: Unable to mount root fs on 08:02
You gave it an incorrect root= statement. The IDE driver picks up
ICH5-SATA, as you see above, so you would use root=/dev/hda1 or whatever.
Jeff
next prev parent reply other threads:[~2003-10-02 21:48 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-10-01 14:55 Serial ATA support in 2.4.22 Andrew Marold
2003-10-01 15:13 ` Jeff Garzik
2003-10-01 16:34 ` Jeff Garzik
2003-10-02 21:42 ` Serial ATA on Dell Dimension 8300 (Was: Re: Serial ATA support in 2.4.22) Martin List-Petersen
2003-10-02 21:47 ` Jeff Garzik [this message]
2003-10-02 21:52 ` Martin List-Petersen
2003-10-02 22:00 ` Jeff Garzik
2003-10-02 22:35 ` Martin List-Petersen
2003-10-02 21:52 ` Erik Steffl
2003-10-02 21:56 ` Jeff Garzik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3F7C9CFF.8090002@pobox.com \
--to=jgarzik@pobox.com \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=andrew.marold@wlm.edial.com \
--cc=bero@arklinux.org \
--cc=linux-kernel@vger.kernel.org \
--cc=martin@list-petersen.se \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox