From: dacin <dacin@hotpop.com>
To: reg@dwf.com
Cc: linux-kernel@vger.kernel.org
Subject: Re: 2.6.0 - Network doesn't come up.
Date: Fri, 03 Oct 2003 03:35:45 +0530 [thread overview]
Message-ID: <3F7CA139.3000108@hotpop.com> (raw)
In-Reply-To: <200310022138.h92Lc67x005420@orion.dwf.com>
Upgrade your initscripts from rawhide ...... it will fix it.
regards
<dacodecz>
reg@dwf.com wrote:
>OK, Im trying to run 2.6.0-test6 on top of RH9.
>I have progress in some areas but not others.
>
>NETWORKING. is a nogo.
>
>If I compile the driver 3c59x as a module, it gets loaded, but
>with the driver in the kernel or as a module, I get the messages
>in the messages file (during boot) or when I do a ./network start
>from /etc/rc.d/init.d
>
>---
>
>[root@orion init.d]# ./network* restart
>Shutting down interface eth0: [ OK ]
>Shutting down loopback interface: [ OK ]
>Setting network parameters: [ OK ]
>Bringing up loopback interface: arping: socket: Address family not supported
>by protocol
>Error, some other host already uses address 127.0.0.1.
> [FAILED]
>Bringing up interface eth0: arping: socket: Address family not supported by
>protocol
>Error, some other host already uses address 204.134.2.19.
> [FAILED]
>
>---
>
> Reg.Clemens
> reg@dwf.com
>
>
>-
>To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
>the body of a message to majordomo@vger.kernel.org
>More majordomo info at http://vger.kernel.org/majordomo-info.html
>Please read the FAQ at http://www.tux.org/lkml/
>
>
>
next prev parent reply other threads:[~2003-10-02 23:28 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-10-02 21:38 2.6.0 - Network doesn't come up reg
2003-10-02 21:45 ` Zwane Mwaikambo
2003-10-02 22:05 ` dacin [this message]
2003-10-02 22:25 ` James Morris
-- strict thread matches above, loose matches on Subject: below --
2003-10-02 19:22 reg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3F7CA139.3000108@hotpop.com \
--to=dacin@hotpop.com \
--cc=linux-kernel@vger.kernel.org \
--cc=reg@dwf.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox