* [2.6.0-test3,6,7] IDE 'enhanced mode' problems
@ 2003-10-17 11:00 Jurgen Kramer
2003-10-17 12:38 ` Jeff Garzik
0 siblings, 1 reply; 3+ messages in thread
From: Jurgen Kramer @ 2003-10-17 11:00 UTC (permalink / raw)
To: linux-kernel
Hi,
I have various systems running 2.6.0-test kernels without problems so I
thought lets try 2.6.0-test7 on my main system again...I had run test3
without problems on this system but now all of a sudden it could not
boot 2.6.0-test3/6/7 normally. It would never pass through init
completely. It just stalled.
The only thing I changed since the last time I ran 2.6.0 successfully
was that I removed the SATA drive (I am running this on a Asus P4C800).
In the BIOS the IDE settings where still set to 'Enhanced mode'. The 2.4
kernel series doesn't seem to have a problem with it. I can't boot 2.6.0
with this setting on.
After changing the mode back to 'Compatible' I can run 2.6.0 properly
again.
Is this a bug in the IDE ICH5 code?
Cheers,
Jurgen
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [2.6.0-test3,6,7] IDE 'enhanced mode' problems
2003-10-17 11:00 [2.6.0-test3,6,7] IDE 'enhanced mode' problems Jurgen Kramer
@ 2003-10-17 12:38 ` Jeff Garzik
2003-10-18 9:44 ` Jurgen Kramer
0 siblings, 1 reply; 3+ messages in thread
From: Jeff Garzik @ 2003-10-17 12:38 UTC (permalink / raw)
To: Jurgen Kramer; +Cc: linux-kernel
Jurgen Kramer wrote:
> Hi,
>
> I have various systems running 2.6.0-test kernels without problems so I
> thought lets try 2.6.0-test7 on my main system again...I had run test3
> without problems on this system but now all of a sudden it could not
> boot 2.6.0-test3/6/7 normally. It would never pass through init
> completely. It just stalled.
>
> The only thing I changed since the last time I ran 2.6.0 successfully
> was that I removed the SATA drive (I am running this on a Asus P4C800).
> In the BIOS the IDE settings where still set to 'Enhanced mode'. The 2.4
> kernel series doesn't seem to have a problem with it. I can't boot 2.6.0
> with this setting on.
>
> After changing the mode back to 'Compatible' I can run 2.6.0 properly
> again.
>
> Is this a bug in the IDE ICH5 code?
Are you running libata?
Jeff
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [2.6.0-test3,6,7] IDE 'enhanced mode' problems
2003-10-17 12:38 ` Jeff Garzik
@ 2003-10-18 9:44 ` Jurgen Kramer
0 siblings, 0 replies; 3+ messages in thread
From: Jurgen Kramer @ 2003-10-18 9:44 UTC (permalink / raw)
To: Jeff Garzik; +Cc: linux-kernel
On Fri, 2003-10-17 at 14:38, Jeff Garzik wrote:
> Jurgen Kramer wrote:
> > Hi,
> >
> > I have various systems running 2.6.0-test kernels without problems so I
> > thought lets try 2.6.0-test7 on my main system again...I had run test3
> > without problems on this system but now all of a sudden it could not
> > boot 2.6.0-test3/6/7 normally. It would never pass through init
> > completely. It just stalled.
> >
> > The only thing I changed since the last time I ran 2.6.0 successfully
> > was that I removed the SATA drive (I am running this on a Asus P4C800).
> > In the BIOS the IDE settings where still set to 'Enhanced mode'. The 2.4
> > kernel series doesn't seem to have a problem with it. I can't boot 2.6.0
> > with this setting on.
> >
> > After changing the mode back to 'Compatible' I can run 2.6.0 properly
> > again.
> >
> > Is this a bug in the IDE ICH5 code?
>
>
> Are you running libata?
>
> Jeff
No. Just plain IDE.
Jurgen
>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2003-10-18 9:46 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-10-17 11:00 [2.6.0-test3,6,7] IDE 'enhanced mode' problems Jurgen Kramer
2003-10-17 12:38 ` Jeff Garzik
2003-10-18 9:44 ` Jurgen Kramer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).