From: David Ford <david+powerix@blue-labs.org>
To: linux-kernel@vger.kernel.org
Subject: test9 suspend problems
Date: Mon, 27 Oct 2003 14:53:57 -0500 [thread overview]
Message-ID: <3F9D77D5.4010306@blue-labs.org> (raw)
# echo -n mem > /sys/power/state
PM: Preparing system for suspend
Stopping tasks: ======================================================|
hdb: start_power_step(step: 0)
hdb: completing PM request, suspend
hda: start_power_step(step: 0)
hda: start_power_step(step: 1)
hda: complete_power_step(step: 1, stat: 50, err: 0)
hda: completing PM request, suspend
PM: Entering state.
Back to C!
PM: Finishing up.
PCI: Setting latency timer of device 0000:00:1d.0 to 64
PCI: Setting latency timer of device 0000:00:1d.2 to 64
PCI: Setting latency timer of device 0000:00:1f.5 to 64
drivers/usb/host/uhci-hcd.c: bf80: host system error, PCI problems?
drivers/usb/host/uhci-hcd.c: bf80: host controller halted. very bad
orinoco_lock() called with hw_unavailable (dev=dcf667f8)
drivers/usb/host/uhci-hcd.c: bf80: host controller halted. very bad
drivers/usb/host/uhci-hcd.c: bf20: host system error, PCI problems?
drivers/usb/host/uhci-hcd.c: bf20: host controller halted. very bad
orinoco_lock() called with hw_unavailable (dev=dcf667f8)
hda: Wakeup request inited, waiting for !BSY...
hda: start_power_step(step: 1000)
blk: queue df5b4bf8, I/O limit 4095Mb (mask 0xffffffff)
hda: completing PM request, resume
hdb: Wakeup request inited, waiting for !BSY...
hdb: start_power_step(step: 1000)
hdb: completing PM request, resume
drivers/acpi/osl.c:734: spin_lock(drivers/acpi/osl.c:dffe0cb0) already
locked by drivers/acpi/osl.c/734
drivers/acpi/osl.c:753: spin_unlock(drivers/acpi/osl.c:dffe0cb0) not locked
Restarting tasks... done
drivers/usb/host/uhci-hcd.c: bf80: host controller halted. very bad
drivers/usb/host/uhci-hcd.c: bf20: host controller halted. very bad
eth1: New link status: Connected (0001)
PM: Preparing system for suspend
Stopping tasks: ======================================================
stopping tasks failed (1 tasks remaining)
Restarting tasks...<6> Strange, artsd not stopped
done
PM: Preparing system for suspend
Stopping tasks: ======================================================
stopping tasks failed (1 tasks remaining)
Restarting tasks...<6> Strange, artsd not stopped
done
On resume, I need to a) close the lid and open it, b) run setfont to
clear the garbage off the screen and make the text readable, and c) run
kbdrate to reset the keyboard rate.
Problems: USB doesn't work after resuming. After plugging in a USB
mouse, all I get is:
drivers/usb/host/uhci-hcd.c: bf80: host system error, PCI problems?
drivers/usb/host/uhci-hcd.c: bf80: host controller halted. very bad
Also, artsd and suspend just don't cooperate well.
artsd D C255DAFC 0 2227 2080 2233 (NOTLB)
d8465ea8 00200082 df8d5960 c255dafc 0000000c df314df8 00000001 d849e960
d8465ebc d035c960 c255dafc 0000000c df8d5960 0000014f c2566a95
0000000c
d849e960 df3aae24 00200286 d8464000 df3aae2c c0108155 df314df8
0000000e
Call Trace:
[<c0108155>] __down+0x133/0x32c
[<c03ca818>] snd_pcm_action_single+0x5f/0x61
[<c01259bd>] default_wake_function+0x0/0x2e
[<c03d0605>] snd_pcm_playback_ioctl+0x0/0x33
[<c0108830>] __down_failed+0x8/0xc
[<c03d1548>] .text.lock.pcm_native+0x2d/0xc9
[<c03cfc05>] snd_pcm_playback_ioctl1+0x52/0x610
[<c01128f9>] timer_interrupt+0x2c6/0x3b6
[<c03d0605>] snd_pcm_playback_ioctl+0x0/0x33
[<c0195013>] sys_ioctl+0x214/0x405
[<c0130b0d>] sys_gettimeofday+0x67/0xd0
[<c010a07b>] syscall_call+0x7/0xb
next reply other threads:[~2003-10-27 19:53 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-10-27 19:53 David Ford [this message]
-- strict thread matches above, loose matches on Subject: below --
2003-10-27 20:51 test9 suspend problems John Mock
2003-10-27 21:00 ` David Ford
2003-10-27 21:53 ` Patrick Mochel
2003-10-27 21:56 ` David Ford
2003-10-27 22:17 ` Patrick Mochel
2003-10-27 23:19 ` Felipe Alfaro Solana
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3F9D77D5.4010306@blue-labs.org \
--to=david+powerix@blue-labs.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox