Re: [PATCH 2.4] forcedeth

[Manfred Spraul <manfred@colorfullife.com>]

Markus Hästbacka wrote:

>usually when I boot up it mount's the remote filesystems, now it just
>failed, and I tryed to ping lan/internet IP's they failed. And I noticed
>that none of my cards were working. this is the output of lspci for the
>card that works without forcedeth support in kernel and does not work if
>forcedeth is enabled: 
>01:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
>RTL-8139/8139C/8139C+ (rev 10)
>That's the main card that I use for lan/internet. ifconfig in the other
>hand told me that I had two working cards. first on had ip 192.168.0.2
>(that's right) and the new card had 192.168.1.1.
>
Please compare the mac addresses listed by ifconfig: I guess that the 
nics changed their names, the nforce chip is now eth0 and the realtek is 
eth1, or vice versa.

--
    Manfred