From: Jonathan Fors <etnoy@myrealbox.com>
To: Thomas Cataldo <tomc@compaqnet.fr>
Cc: lkml-031128@amos.mailshell.com, linux-kernel@vger.kernel.org
Subject: Re: PROBLEM: 2.6test11 kernel panic on "head -1 /proc/net/tcp"
Date: Mon, 01 Dec 2003 22:11:11 +0100 [thread overview]
Message-ID: <3FCBAE6F.1090405@myrealbox.com> (raw)
In-Reply-To: <1070242158.1110.150.camel@buffy>
Thomas Cataldo wrote:
>On Sat, 2003-11-29 at 18:00, lkml-031128@amos.mailshell.com wrote:
>
>
>>Partially. It seems to trigger ppp failure later.
>>
>>
>[...]
>
>
>>This gives me tons of messages like the following:
>>
>>Badness in local_bh_enable at kernel/softirq.c:121
>>Call Trace:
>> [<c011df25>] local_bh_enable+0x85/0x90
>> [<c02315e2>] ppp_async_push+0xa2/0x180
>> [<c0230efd>] ppp_asynctty_wakeup+0x2d/0x60
>> [<c0202638>] pty_unthrottle+0x58/0x60
>> [<c01ff0fd>] check_unthrottle+0x3d/0x40
>> [<c01ff1a3>] n_tty_flush_buffer+0x13/0x60
>> [<c0202a47>] pty_flush_buffer+0x67/0x70
>> [<c01fba41>] do_tty_hangup+0x3f1/0x460
>> [<c01fcfbc>] release_dev+0x62c/0x660
>> [<c013dfab>] zap_pmd_range+0x4b/0x70
>> [<c013e013>] unmap_page_range+0x43/0x70
>> [<c01622a2>] dput+0x22/0x210
>> [<c01fd38a>] tty_release+0x2a/0x60
>> [<c014ccf8>] __fput+0x108/0x120
>> [<c014b359>] filp_close+0x59/0x90
>> [<c011b874>] put_files_struct+0x54/0xc0
>> [<c011c47d>] do_exit+0x15d/0x3e0
>> [<c011c79a>] do_group_exit+0x3a/0xb0
>> [<c01091b7>] syscall_call+0x7/0xb
>>
>>
>
>I just looked at my logs and realised I add a similar oops in my log. It
>happened a few days ago on 2.6.0-test10 (I failed to notice because
>everything seems to work fine).
>
>Here is what I have :
>
>Badness in local_bh_enable at kernel/softirq.c:121
>Call Trace:
> [<c01251d3>] local_bh_enable+0x93/0xa0
> [<f997dced>] ppp_async_push+0xbd/0x1b0 [ppp_async]
> [<f997d58e>] ppp_asynctty_wakeup+0x2e/0x70 [ppp_async]
> [<c01cc619>] pty_unthrottle+0x59/0x60
> [<c01c8c1b>] check_unthrottle+0x3b/0x40
> [<c01c8cd3>] n_tty_flush_buffer+0x13/0x60
> [<c01cca2d>] pty_flush_buffer+0x6d/0x70
> [<c01cc9c0>] pty_flush_buffer+0x0/0x70
> [<c01c4ee3>] do_tty_hangup+0x4e3/0x580
> [<c01c6752>] release_dev+0x742/0x780
> [<c013f82c>] __pagevec_free+0x1c/0x30
> [<c014487e>] release_pages+0x7e/0x1a0
> [<c0171bb1>] dput+0x31/0x270
> [<c01c6b7b>] tty_release+0x3b/0x90
> [<c015a3db>] __fput+0x10b/0x120
> [<c01588e9>] filp_close+0x59/0x90
> [<c0122634>] put_files_struct+0x64/0xd0
> [<c01233cf>] do_exit+0x19f/0x4c0
> [<c01237c2>] do_group_exit+0x42/0xe0
> [<c0109539>] sysenter_past_esp+0x52/0x71
>
>The previous line in my logs was from my TI acx100 wifi card. It runs
>with the experimental driver from http://acx100.sf.net. So if this oops
>can be caused by bad driver behaviour, please ignore.
>
>I am using ppp with pppoe on a ne2k-pci network board.
>
>I have smp (dual-p3) and preemption enabled. The kernel is compiled with
>gcc 3.3.1-2 from debian sid.
>
>
>-
>To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
>the body of a message to majordomo@vger.kernel.org
>More majordomo info at http://vger.kernel.org/majordomo-info.html
>Please read the FAQ at http://www.tux.org/lkml/
>
>
>
>
I can verify that one, tried it on my pentium 2 and it froze the
machine (i was NOT root then) . Had to SysRQ the box to get up again.
My machine is:
Dell Optiplek Gx1
350MhZ Pentium 2 Deschutes
190 MB Pc100 SDRAM
Gentoo Linux 1.4
GCC 3.2.3
Kernel: 2.6.0-test11 modified only with bootsplash patch
Preempt ENABLED
next prev parent reply other threads:[~2003-12-01 21:12 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-11-28 17:01 PROBLEM: 2.6test11 kernel panic on "head -1 /proc/net/tcp" lkml-031128
2003-11-28 17:20 ` OGAWA Hirofumi
2003-11-29 17:00 ` lkml-031128
2003-12-01 1:29 ` Thomas Cataldo
2003-12-01 21:11 ` Jonathan Fors [this message]
2003-12-01 21:36 ` lkml-031128
2003-12-03 15:18 ` OGAWA Hirofumi
2003-12-05 11:23 ` lkml-031128
2003-12-05 12:29 ` venom
2003-12-05 14:10 ` OGAWA Hirofumi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3FCBAE6F.1090405@myrealbox.com \
--to=etnoy@myrealbox.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lkml-031128@amos.mailshell.com \
--cc=tomc@compaqnet.fr \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox