* PROBLEM: siimage.o on AMD768 platform
@ 2003-12-16 8:43 Ola Leifler
2003-12-16 9:04 ` Ola Leifler
0 siblings, 1 reply; 2+ messages in thread
From: Ola Leifler @ 2003-12-16 8:43 UTC (permalink / raw)
To: linux-kernel; +Cc: olale
Hi!
[Formatted according to
http://www.kernel.org/pub/linux/docs/lkml/reporting-bugs.html]
1. Brief description:
My Silicon Image 3112A controller doesn't recognize any of the two
Seagate 7200.7 80Gb discs attached to it. Neither do the ide2/ide3
interfaces show up in /proc, according to the information below.
2. Full description:
When using siimage.o to access a dual channel Serial ATA controller
with a Silicon Image 3112 chipset, none of the two hard discs are
detected (No program can access /dev/hd[e-h]). However, the module
refuses to unload (device busy). During boot, the card BIOS lists both
discs.
3. Keywords:
modules, sata, siimage.o, amd768
4. Version information from /proc/version
Linux version 2.4.23 (root@localhost) (gcc version 3.2.3 (Debian)) #1
SMP mån dec 15 20:19:54 CET 2003
7. Environment
7.1 scripts/ver_linux output
Gnu C 3.2.3
Gnu make 3.80
binutils 2.13.90.0.18
util-linux 2.12
mount 2.11u
modutils 2.4.25
e2fsprogs 1.34-WIP
Linux C Library 2.3.2
Dynamic linker (ldd) 2.3.2
Procps 3.1.14
Net-tools 1.60
Kbd 1.06
Sh-utils 5.0
Modules Loaded nvidia sg sr_mod autofs4 snd-seq-midi snd-seq-oss
snd-seq-midi-event snd-seq snd-pcm-oss snd-mixer-oss snd-cmipci snd-pcm
snd-page-alloc snd-opl3-lib snd-hwdep snd-timer snd-mpu401-uart
snd-rawmidi snd-seq-device snd soundcore ipt_MASQUERADE ipt_state
iptable_nat ip_conntrack iptable_filter ip_tables af_packet w83781d
i2c-proc i2c-amd756 i2c-dev i2c-core ide-scsi siimage tulip crc32 rtc unix
7.2 Processor information from /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 6
model name : AMD Athlon(TM) MP 1700+
stepping : 2
cpu MHz : 1466.768
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 mmx fxsr sse syscall mp mmxext 3dnowext 3dnow
bogomips : 2922.90
processor : 1
vendor_id : AuthenticAMD
cpu family : 6
model : 6
model name : AMD Athlon(TM) MP 1700+
stepping : 2
cpu MHz : 1466.768
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 mmx fxsr sse syscall mp mmxext 3dnowext 3dnow
bogomips : 2929.45
7.3 Module information from /proc/modules
nvidia 1629504 22 (autoclean)
sg 33644 0 (autoclean)
sr_mod 16120 0 (autoclean)
autofs4 10420 1 (autoclean)
snd-seq-midi 4096 0 (autoclean) (unused)
snd-seq-oss 29920 0 (unused)
snd-seq-midi-event 3488 0 [snd-seq-midi snd-seq-oss]
snd-seq 40464 2 [snd-seq-midi snd-seq-oss
snd-seq-midi-event]
snd-pcm-oss 38148 0 (unused)
snd-mixer-oss 13328 0 [snd-pcm-oss]
snd-cmipci 20992 0
snd-pcm 63168 0 [snd-pcm-oss snd-cmipci]
snd-page-alloc 6260 0 [snd-pcm]
snd-opl3-lib 6852 0 [snd-cmipci]
snd-hwdep 5440 0 [snd-opl3-lib]
snd-timer 15748 0 [snd-seq snd-pcm snd-opl3-lib]
snd-mpu401-uart 3600 0 [snd-cmipci]
snd-rawmidi 14176 0 [snd-seq-midi snd-mpu401-uart]
snd-seq-device 4244 0 [snd-seq-midi snd-seq-oss snd-seq
snd-opl3-lib snd-rawmidi]
snd 34436 0 [snd-seq-midi snd-seq-oss
snd-seq-midi-event snd-seq snd-pcm-oss snd-mixer-oss snd-cmipci snd-pcm
snd-opl3-lib snd-hwdep snd-timer snd-mpu401-uart snd-rawmidi snd-seq-device]
soundcore 4356 8 [snd]
ipt_MASQUERADE 1880 1 (autoclean)
ipt_state 568 25 (autoclean)
iptable_nat 17688 1 (autoclean) [ipt_MASQUERADE]
ip_conntrack 22984 2 (autoclean) [ipt_MASQUERADE ipt_state
iptable_nat]
iptable_filter 1740 1 (autoclean)
ip_tables 13152 6 [ipt_MASQUERADE ipt_state iptable_nat
iptable_filter]
af_packet 14856 2 (autoclean)
w83781d 22608 0 (unused)
i2c-proc 6292 0 [w83781d]
i2c-amd756 2952 0 (unused)
i2c-dev 4096 0 (unused)
i2c-core 14212 0 [w83781d i2c-proc i2c-amd756 i2c-dev]
ide-scsi 10480 0
siimage 8964 1
tulip 40960 2
crc32 2880 0 [tulip]
rtc 7644 0 (autoclean)
unix 17512 47 (autoclean)
7.4 Loaded driver and hardware information from /proc/ioports first,
/proc/iomem next
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial(set)
0330-0331 : MPU401 UART
0376-0376 : ide1
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(set)
0cf8-0cff : PCI conf1
a000-cfff : PCI Bus #02
a400-a40f : CMD Technology Inc Silicon Image SiI 3112 SATARaid Controller
a800-a803 : CMD Technology Inc Silicon Image SiI 3112 SATARaid Controller
b000-b007 : CMD Technology Inc Silicon Image SiI 3112 SATARaid Controller
b400-b403 : CMD Technology Inc Silicon Image SiI 3112 SATARaid Controller
b800-b807 : CMD Technology Inc Silicon Image SiI 3112 SATARaid Controller
c000-c0ff : LSI Logic / Symbios Logic 53c895
c000-c07f : sym53c8xx
c400-c4ff : Accton Technology Corporation EN-1216 Ethernet Adapter (#2)
c400-c4ff : tulip
c800-c8ff : C-Media Electronics Inc CM8738
c800-c8ff : CMI8738-MC6
d400-d4ff : Accton Technology Corporation EN-1216 Ethernet Adapter
d400-d4ff : tulip
d800-d80f : Advanced Micro Devices [AMD] AMD-768 [Opus] IDE
d800-d807 : ide0
d808-d80f : ide1
e4e0-e4ef : amd756-smbus
e800-e803 : Advanced Micro Devices [AMD] AMD-760 MP [IGD4-2P] System
Controller
00000000-0009f3ff : System RAM
0009f400-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000d0000-000d1fff : Extension ROM
000d4000-000d87ff : Extension ROM
000f0000-000fffff : System ROM
00100000-1ffebfff : System RAM
00100000-00252dfd : Kernel code
00252dfe-002a5da3 : Kernel data
1ffec000-1ffeefff : ACPI Tables
1ffef000-1fffefff : reserved
1ffff000-1fffffff : ACPI Non-volatile Storage
db000000-dd7fffff : PCI Bus #02
db000000-db0001ff : CMD Technology Inc Silicon Image SiI 3112 SATARaid
Controller
db000000-db0001ff : SiI3112 Serial ATA
db800000-db800fff : LSI Logic / Symbios Logic 53c895
dc000000-dc0000ff : LSI Logic / Symbios Logic 53c895
dc800000-dc8003ff : Accton Technology Corporation EN-1216 Ethernet
Adapter (#2)
dc800000-dc8003ff : tulip
dd800000-dd8003ff : Accton Technology Corporation EN-1216 Ethernet Adapter
dd800000-dd8003ff : tulip
de000000-df4fffff : PCI Bus #01
de000000-deffffff : nVidia Corporation NV20 [GeForce3 Ti 200]
df500000-df5fffff : PCI Bus #02
df700000-ef7fffff : PCI Bus #01
df800000-df87ffff : nVidia Corporation NV20 [GeForce3 Ti 200]
e0000000-e7ffffff : nVidia Corporation NV20 [GeForce3 Ti 200]
ef800000-ef800fff : Advanced Micro Devices [AMD] AMD-760 MP [IGD4-2P]
System Controller
f0000000-f7ffffff : Advanced Micro Devices [AMD] AMD-760 MP [IGD4-2P]
System Controller
fec00000-fec00fff : reserved
fee00000-fee00fff : reserved
ffff0000-ffffffff : reserved
7.5 PCI information from lspci -vvv as root
00:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-760 MP [IGD4-2P]
System Controller (rev 11)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 32
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at ef800000 (32-bit, prefetchable) [size=4K]
Region 2: I/O ports at e800 [disabled] [size=4]
Capabilities: [a0] AGP version 2.0
Status: RQ=16 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans-
64bit- FW- AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP+ GART64- 64bit- FW- Rate=x4
00:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-760 MP [IGD4-2P]
AGP Bridge (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000dfff
Memory behind bridge: de000000-df4fffff
Prefetchable memory behind bridge: df700000-ef7fffff
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
00:07.0 ISA bridge: Advanced Micro Devices [AMD] AMD-768 [Opus] ISA (rev 04)
Subsystem: Asustek Computer, Inc. A7M-D Mainboard
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:07.1 IDE interface: Advanced Micro Devices [AMD] AMD-768 [Opus] IDE
(rev 04) (prog-if 8a [Master SecP PriP])
Subsystem: Advanced Micro Devices [AMD] AMD-768 [Opus] IDE
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Region 4: I/O ports at d800 [size=16]
00:07.3 Bridge: Advanced Micro Devices [AMD] AMD-768 [Opus] ACPI (rev 03)
Subsystem: Asustek Computer, Inc. A7M-D Mainboard
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
00:09.0 Ethernet controller: Accton Technology Corporation EN-1216
Ethernet Adapter (rev 11)
Subsystem: Standard Microsystems Corp [SMC]: Unknown device 1255
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (63750ns min, 63750ns max), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at d400 [size=256]
Region 1: Memory at dd800000 (32-bit, non-prefetchable) [size=1K]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=100mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:10.0 PCI bridge: Advanced Micro Devices [AMD] AMD-768 [Opus] PCI (rev
04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 32
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000a000-0000cfff
Memory behind bridge: db000000-dd7fffff
Prefetchable memory behind bridge: df500000-df5fffff
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
01:05.0 VGA compatible controller: nVidia Corporation NV20 [GeForce3 Ti
200] (rev a3) (prog-if 00 [VGA])
Subsystem: CardExpert Technology: Unknown device 0c3c
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 248 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 16
Region 0: Memory at de000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e0000000 (32-bit, prefetchable) [size=128M]
Region 2: Memory at df800000 (32-bit, prefetchable) [size=512K]
Expansion ROM at df7f0000 [disabled] [size=64K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans-
64bit- FW- AGP3- Rate=x1,x2,x4
Command: RQ=16 ArqSz=0 Cal=0 SBA- AGP+ GART64- 64bit- FW- Rate=x4
02:04.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
Subsystem: Asustek Computer, Inc. CMI8738 6-channel audio controller
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 6000ns max)
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at c800 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:05.0 Ethernet controller: Accton Technology Corporation EN-1216
Ethernet Adapter (rev 11)
Subsystem: Standard Microsystems Corp [SMC]: Unknown device 1255
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (63750ns min, 63750ns max), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at c400 [size=256]
Region 1: Memory at dc800000 (32-bit, non-prefetchable) [size=1K]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=100mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:06.0 SCSI storage controller: LSI Logic / Symbios Logic 53c895 (rev 01)
Subsystem: Tekram Technology Co.,Ltd. DC-390U2W
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (7500ns min, 16000ns max), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at c000 [size=256]
Region 1: Memory at dc000000 (32-bit, non-prefetchable) [size=256]
Region 2: Memory at db800000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at <unassigned> [disabled] [size=64K]
02:08.0 Unknown mass storage controller: CMD Technology Inc Silicon
Image SiI 3112 SATARaid Controller (rev 02)
Subsystem: CMD Technology Inc Silicon Image SiI 3112 SATARaid Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 0x01 (4 bytes)
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at b800 [size=8]
Region 1: I/O ports at b400 [size=4]
Region 2: I/O ports at b000 [size=8]
Region 3: I/O ports at a800 [size=4]
Region 4: I/O ports at a400 [size=16]
Region 5: Memory at db000000 (32-bit, non-prefetchable) [size=512]
Expansion ROM at <unassigned> [disabled] [size=512K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
7.6 SCSI information from /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: SEAGATE Model: ST318438LW Rev: 0002
Type: Direct-Access ANSI SCSI revision: 03
Host: scsi1 Channel: 00 Id: 00 Lun: 00
Vendor: ATAPI Model: CD-RW 52XMax Rev: 150D
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 00 Lun: 01
Vendor: ATAPI Model: CD-RW 52XMax Rev: 150D
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 00 Lun: 02
Vendor: ATAPI Model: CD-RW 52XMax Rev: 150D
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 00 Lun: 03
Vendor: ATAPI Model: CD-RW 52XMax Rev: 150D
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 00 Lun: 04
Vendor: ATAPI Model: CD-RW 52XMax Rev: 150D
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 00 Lun: 05
Vendor: ATAPI Model: CD-RW 52XMax Rev: 150D
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 00 Lun: 06
Vendor: ATAPI Model: CD-RW 52XMax Rev: 150D
Type: CD-ROM ANSI SCSI revision: 02
7.7 Other information
From dmesg:
SiI3112 Serial ATA: IDE controller at PCI slot 02:08.0
SiI3112 Serial ATA: chipset revision 2
SiI3112 Serial ATA: not 100% native mode: will probe irqs later
ide2: MMIO-DMA , BIOS settings: hde:pio, hdf:pio
ide3: MMIO-DMA , BIOS settings: hdg:pio, hdh:pio
TIA!
/Ola Leifler
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: PROBLEM: siimage.o on AMD768 platform
2003-12-16 8:43 PROBLEM: siimage.o on AMD768 platform Ola Leifler
@ 2003-12-16 9:04 ` Ola Leifler
0 siblings, 0 replies; 2+ messages in thread
From: Ola Leifler @ 2003-12-16 9:04 UTC (permalink / raw)
To: linux-kernel; +Cc: Ola Leifler
Ola Leifler wrote:
> Hi!
> [Formatted according to
> http://www.kernel.org/pub/linux/docs/lkml/reporting-bugs.html]
> 1. Brief description:
> My Silicon Image 3112A controller doesn't recognize any of the two
> Seagate 7200.7 80Gb discs attached to it. Neither do the ide2/ide3
> interfaces show up in /proc, according to the information below.
>
> 2. Full description:
> When using siimage.o to access a dual channel Serial ATA controller
> with a Silicon Image 3112 chipset, none of the two hard discs are
> detected (No program can access /dev/hd[e-h]). However, the module
> refuses to unload (device busy). During boot, the card BIOS lists
> both discs.
Some additional information which may or may not be of any assistance to
Andre or Alan:
There doesn't seem to be any device on interrupt 19 though lspci -vvv
suggested that.
# cat /proc/interrupts
CPU0 CPU1
0: 234977 236815 IO-APIC-edge timer
1: 6117 6152 IO-APIC-edge keyboard
2: 0 0 XT-PIC cascade
8: 3 1 IO-APIC-edge rtc
12: 87594 88013 IO-APIC-edge PS/2 Mouse
14: 9 20 IO-APIC-edge ide0
15: 204 269 IO-APIC-edge ide1
16: 179228 178555 IO-APIC-level nvidia
17: 15291 15367 IO-APIC-level sym53c8xx, eth0, CMI8738-MC6
18: 19569 19540 IO-APIC-level eth1
NMI: 0 0
LOC: 471710 471740
ERR: 0
MIS: 0
# cat /proc/devices
Character devices:
1 mem
2 pty/m%d
3 pty/s%d
4 tts/%d
5 cua/%d
7 vcs
10 misc
14 sound
21 sg
89 i2c
116 alsa
128 ptm
136 pts/%d
162 raw
195 nvidia
Block devices:
1 ramdisk
3 ide0
8 sd
11 sr
22 ide1
65 sd
66 sd
/Ola
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2003-12-16 9:04 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-12-16 8:43 PROBLEM: siimage.o on AMD768 platform Ola Leifler
2003-12-16 9:04 ` Ola Leifler
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox