From: Stef van der Made <svdmade@planet.nl>
To: Muhammad Talha <talha@worldcall.net.pk>
Cc: linux-kernel@vger.kernel.org
Subject: Re: kernel 2.6.0 compilation help
Date: Tue, 23 Dec 2003 16:56:41 +0100 [thread overview]
Message-ID: <3FE865B9.3090502@planet.nl> (raw)
In-Reply-To: <008601c3c924$13555170$23c051cb@ns3.worldcall.net.pk>
Dear Muhammad,
I think that you need to set this option
CONFIG_BLK_DEV_SD=m to Y and your problem should be solved. The kernel now doesn't know scsi disks (in menuconfig SCSI disk support)
Best regards,
Stef
Muhammad Talha wrote:
>Dear all
>
>i have Red Hat 9 i am trying to install kernel 2.6.0 . kernel seems to
>compiled ok but does not boot
>give following error at boot all drive are detected before boot.
>
>module-init-tools 0.9.9 installed
>ext3 filesystem support was build in the kernel
>aslo /dev file system support buildin
>my root parttion is /dev/sda1 ( ext3)
>my .config
>
>http://mail.magic.net.pk/kernel/.config
>
>
>Error Message ##
>
>VFS: Cannot open root device "sda1" or unknown-block(0,0)
>Please append a correct "root="boot option
>Kernel Panic : VFS Uanble to mount root fs on unknown-block(0,0)
>
>i have following Hardware
>
>Intel Entry level Server motherboard
>Pentitum III 1266 MHz processor
>2 GB RAM
>3 SCSI hard drive
>no ide drive
>
>i have tried many time with different option but with no luck
>
>Thanks waiting for your reply
>
>Talha
>
>-
>To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
>the body of a message to majordomo@vger.kernel.org
>More majordomo info at http://vger.kernel.org/majordomo-info.html
>Please read the FAQ at http://www.tux.org/lkml/
>
>
>
prev parent reply other threads:[~2003-12-23 15:56 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-12-23 7:12 kernel 2.6.0 compilation help Muhammad Talha
2003-12-23 15:56 ` Stef van der Made [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3FE865B9.3090502@planet.nl \
--to=svdmade@planet.nl \
--cc=linux-kernel@vger.kernel.org \
--cc=talha@worldcall.net.pk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox