public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
* hotplug and 2.6.0-mm1
@ 2003-12-25  5:11 Sid Boyce
  2003-12-27 20:51 ` Greg KH
  0 siblings, 1 reply; 2+ messages in thread
From: Sid Boyce @ 2003-12-25  5:11 UTC (permalink / raw)
  To: linux-kernel

I get failures with hotplug on SuSE 9.0 and found out it is expecting 
/proc/bus/usb/drivers/ to exist. Modding /etc/hotplug/usb.rc to point to 
/sys/bus/usb/drivers/ does not fix it.
Downloaded and built hotplug-2003_08_05.tar.gz (latest I could find), 
but the file looks just the same and I'm getting "hotplug: can't 
synthesize events" messages.
Is there a 2.6.0 hotplug to be had?
Regards
Sid.
-- 
Sid Boyce .... Hamradio G3VBV and keen Flyer
Linux Only Shop.

^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: hotplug and 2.6.0-mm1
  2003-12-25  5:11 hotplug and 2.6.0-mm1 Sid Boyce
@ 2003-12-27 20:51 ` Greg KH
  0 siblings, 0 replies; 2+ messages in thread
From: Greg KH @ 2003-12-27 20:51 UTC (permalink / raw)
  To: Sid Boyce; +Cc: linux-kernel

On Thu, Dec 25, 2003 at 05:11:46AM +0000, Sid Boyce wrote:
> I get failures with hotplug on SuSE 9.0 and found out it is expecting 
> /proc/bus/usb/drivers/ to exist. Modding /etc/hotplug/usb.rc to point to 
> /sys/bus/usb/drivers/ does not fix it.
> Downloaded and built hotplug-2003_08_05.tar.gz (latest I could find), 
> but the file looks just the same and I'm getting "hotplug: can't 
> synthesize events" messages.
> Is there a 2.6.0 hotplug to be had?

The latest version should work just fine on a Red Hat based machine.
Since you are using SuSE, I'd ask them if there are any tweaks that need
to be made for that system.

Good luck,

greg k-h

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2003-12-27 20:53 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-12-25  5:11 hotplug and 2.6.0-mm1 Sid Boyce
2003-12-27 20:51 ` Greg KH

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox