* e1000 in 2.6.1-mm1 -- still broken?
@ 2004-01-09 20:52 Eric Whiting
2004-01-09 21:56 ` Andrew Morton
2004-01-09 22:03 ` Jeff Garzik
0 siblings, 2 replies; 3+ messages in thread
From: Eric Whiting @ 2004-01-09 20:52 UTC (permalink / raw)
To: linux-kernel; +Cc: akpm
I'm having trouble with e1000 in -mm1. (works in 2.6.1) The device is detected
and shows up and can be configured, but nothing ever goes out on the wire.
Here is the device info:
07:01.1 Ethernet controller: Intel Corporation: Unknown device 1010 (rev 01)
Subsystem: Intel Corporation: Unknown device 1011
Flags: bus master, 66Mhz, medium devsel, latency 64, IRQ 49
Memory at fe9e0000 (64-bit, non-prefetchable) [size=128K]
I/O ports at dc00 [size=64]
Capabilities: [dc] Power Management version 2
Capabilities: [e4] PCI-X non-bridge device.
Capabilities: [f0] Message Signalled Interrupts: 64bit+ Queue=0/0
Enable-
tcpdump shows no activity when I attempt to use the e1000 interface.
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: e1000 in 2.6.1-mm1 -- still broken?
2004-01-09 20:52 e1000 in 2.6.1-mm1 -- still broken? Eric Whiting
@ 2004-01-09 21:56 ` Andrew Morton
2004-01-09 22:03 ` Jeff Garzik
1 sibling, 0 replies; 3+ messages in thread
From: Andrew Morton @ 2004-01-09 21:56 UTC (permalink / raw)
To: Eric Whiting; +Cc: linux-kernel, scott.feldman, cramerj
Eric Whiting <ewhiting@amis.com> wrote:
>
>
> I'm having trouble with e1000 in -mm1. (works in 2.6.1) The device is detected
> and shows up and can be configured, but nothing ever goes out on the wire.
Hum, OK. We'd better Cc the maintainers.
> Here is the device info:
>
>
> 07:01.1 Ethernet controller: Intel Corporation: Unknown device 1010 (rev 01)
> Subsystem: Intel Corporation: Unknown device 1011
> Flags: bus master, 66Mhz, medium devsel, latency 64, IRQ 49
> Memory at fe9e0000 (64-bit, non-prefetchable) [size=128K]
> I/O ports at dc00 [size=64]
> Capabilities: [dc] Power Management version 2
> Capabilities: [e4] PCI-X non-bridge device.
> Capabilities: [f0] Message Signalled Interrupts: 64bit+ Queue=0/0
> Enable-
>
>
> tcpdump shows no activity when I attempt to use the e1000 interface.
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: e1000 in 2.6.1-mm1 -- still broken?
2004-01-09 20:52 e1000 in 2.6.1-mm1 -- still broken? Eric Whiting
2004-01-09 21:56 ` Andrew Morton
@ 2004-01-09 22:03 ` Jeff Garzik
1 sibling, 0 replies; 3+ messages in thread
From: Jeff Garzik @ 2004-01-09 22:03 UTC (permalink / raw)
To: Eric Whiting; +Cc: linux-kernel, akpm
Eric Whiting wrote:
> I'm having trouble with e1000 in -mm1. (works in 2.6.1) The device is detected
> and shows up and can be configured, but nothing ever goes out on the wire.
Should be fixed when akpm updates the e1000 patch to
http://www.kernel.org/pub/linux/kernel/people/jgarzik/patchkits/2.6/2.6.1-netdrvr-exp1.patch.bz2
http://www.kernel.org/pub/linux/kernel/people/jgarzik/patchkits/2.6/2.6.1-netdrvr-exp1.log
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2004-01-09 22:03 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-01-09 20:52 e1000 in 2.6.1-mm1 -- still broken? Eric Whiting
2004-01-09 21:56 ` Andrew Morton
2004-01-09 22:03 ` Jeff Garzik
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox