* [PATCH net-next v2] net: gianfar: Use device_get_named_child_node_count()
@ 2025-06-18 12:22 Matti Vaittinen
2025-06-18 18:56 ` Simon Horman
2025-06-19 22:50 ` patchwork-bot+netdevbpf
0 siblings, 2 replies; 3+ messages in thread
From: Matti Vaittinen @ 2025-06-18 12:22 UTC (permalink / raw)
To: Matti Vaittinen, Matti Vaittinen
Cc: Claudiu Manoil, Andrew Lunn, David S. Miller, Eric Dumazet,
Jakub Kicinski, Paolo Abeni, horms, netdev, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 2177 bytes --]
We can avoid open-coding the loop construct which counts firmware child
nodes with a specific name by using the newly added
device_get_named_child_node_count().
The gianfar driver has such open-coded loop. Replace it with the
device_get_child_node_count_named().
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
Previously sent as part of the BD79124 ADC series:
https://lore.kernel.org/all/95b6015cd5f6fcce535982118543d47504ed609f.1742225817.git.mazziesaccount@gmail.com/
All dependencies should be in net-next now.
Compile tested only!
---
drivers/net/ethernet/freescale/gianfar.c | 17 ++++-------------
1 file changed, 4 insertions(+), 13 deletions(-)
diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c
index bcbcad613512..7c0f049f0938 100644
--- a/drivers/net/ethernet/freescale/gianfar.c
+++ b/drivers/net/ethernet/freescale/gianfar.c
@@ -97,6 +97,7 @@
#include <linux/phy_fixed.h>
#include <linux/of.h>
#include <linux/of_net.h>
+#include <linux/property.h>
#include "gianfar.h"
@@ -571,18 +572,6 @@ static int gfar_parse_group(struct device_node *np,
return 0;
}
-static int gfar_of_group_count(struct device_node *np)
-{
- struct device_node *child;
- int num = 0;
-
- for_each_available_child_of_node(np, child)
- if (of_node_name_eq(child, "queue-group"))
- num++;
-
- return num;
-}
-
/* Reads the controller's registers to determine what interface
* connects it to the PHY.
*/
@@ -654,8 +643,10 @@ static int gfar_of_init(struct platform_device *ofdev, struct net_device **pdev)
num_rx_qs = 1;
} else { /* MQ_MG_MODE */
/* get the actual number of supported groups */
- unsigned int num_grps = gfar_of_group_count(np);
+ unsigned int num_grps;
+ num_grps = device_get_named_child_node_count(&ofdev->dev,
+ "queue-group");
if (num_grps == 0 || num_grps > MAXGROUPS) {
dev_err(&ofdev->dev, "Invalid # of int groups(%d)\n",
num_grps);
--
2.49.0
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH net-next v2] net: gianfar: Use device_get_named_child_node_count()
2025-06-18 12:22 [PATCH net-next v2] net: gianfar: Use device_get_named_child_node_count() Matti Vaittinen
@ 2025-06-18 18:56 ` Simon Horman
2025-06-19 22:50 ` patchwork-bot+netdevbpf
1 sibling, 0 replies; 3+ messages in thread
From: Simon Horman @ 2025-06-18 18:56 UTC (permalink / raw)
To: Matti Vaittinen
Cc: Matti Vaittinen, Claudiu Manoil, Andrew Lunn, David S. Miller,
Eric Dumazet, Jakub Kicinski, Paolo Abeni, netdev, linux-kernel
On Wed, Jun 18, 2025 at 03:22:02PM +0300, Matti Vaittinen wrote:
> We can avoid open-coding the loop construct which counts firmware child
> nodes with a specific name by using the newly added
> device_get_named_child_node_count().
>
> The gianfar driver has such open-coded loop. Replace it with the
> device_get_child_node_count_named().
>
> Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> ---
> Previously sent as part of the BD79124 ADC series:
> https://lore.kernel.org/all/95b6015cd5f6fcce535982118543d47504ed609f.1742225817.git.mazziesaccount@gmail.com/
>
> All dependencies should be in net-next now.
>
> Compile tested only!
Thanks for resending.
Reviewed-by: Simon Horman <horms@kernel.org>
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH net-next v2] net: gianfar: Use device_get_named_child_node_count()
2025-06-18 12:22 [PATCH net-next v2] net: gianfar: Use device_get_named_child_node_count() Matti Vaittinen
2025-06-18 18:56 ` Simon Horman
@ 2025-06-19 22:50 ` patchwork-bot+netdevbpf
1 sibling, 0 replies; 3+ messages in thread
From: patchwork-bot+netdevbpf @ 2025-06-19 22:50 UTC (permalink / raw)
To: Matti Vaittinen
Cc: matti.vaittinen, claudiu.manoil, andrew+netdev, davem, edumazet,
kuba, pabeni, horms, netdev, linux-kernel
Hello:
This patch was applied to netdev/net-next.git (main)
by Jakub Kicinski <kuba@kernel.org>:
On Wed, 18 Jun 2025 15:22:02 +0300 you wrote:
> We can avoid open-coding the loop construct which counts firmware child
> nodes with a specific name by using the newly added
> device_get_named_child_node_count().
>
> The gianfar driver has such open-coded loop. Replace it with the
> device_get_child_node_count_named().
>
> [...]
Here is the summary with links:
- [net-next,v2] net: gianfar: Use device_get_named_child_node_count()
https://git.kernel.org/netdev/net-next/c/64f37cd57d7a
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2025-06-19 22:49 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2025-06-18 12:22 [PATCH net-next v2] net: gianfar: Use device_get_named_child_node_count() Matti Vaittinen
2025-06-18 18:56 ` Simon Horman
2025-06-19 22:50 ` patchwork-bot+netdevbpf
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).