[PATCH 2/3] mmc: block: Limit queue size for consecutive requeues

["Christian Löhle" <CLoehle@hyperstone.com>]

In case mmcblk relies on requeueing to fulfill block layer requests due to
hardware or driver restricting the max_blk_count to 1 also limit the
hardware queue size to 1 to get consecutive accesses instead of a
round-robin on all queued reads.

See SDHCI_QUIRK_NO_MULTIBLOCK for such a restriction.

Signed-off-by: Christian Loehle <cloehle@hyperstone.com>
---
 drivers/mmc/core/queue.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/mmc/core/queue.c b/drivers/mmc/core/queue.c
index fefaa901b50f..3a20f3933502 100644
--- a/drivers/mmc/core/queue.c
+++ b/drivers/mmc/core/queue.c
@@ -425,6 +425,8 @@ struct gendisk *mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card)
 	if (host->cqe_enabled && !host->hsq_enabled)
 		mq->tag_set.queue_depth =
 			min_t(int, card->ext_csd.cmdq_depth, host->cqe_qdepth);
+	else if (host->max_blk_count == 1)
+		mq->tag_set.queue_depth = 1;
 	else
 		mq->tag_set.queue_depth = MMC_QUEUE_DEPTH;
 	mq->tag_set.numa_node = NUMA_NO_NODE;
-- 
2.37.3

Hyperstone GmbH | Reichenaustr. 39a  | 78467 Konstanz
Managing Director: Dr. Jan Peter Berns.
Commercial register of local courts: Freiburg HRB381782