From: Mauricio Lin <mauriciolin@gmail.com>
To: Andrew Morton <akpm@osdl.org>
Cc: linux-kernel@vger.kernel.org
Subject: Re: [PATCH] A new entry for /proc
Date: Fri, 14 Jan 2005 18:46:11 -0400 [thread overview]
Message-ID: <3f250c7105011414466f22fc37@mail.gmail.com> (raw)
In-Reply-To: <20050106202339.4f9ba479.akpm@osdl.org>
Hi All,
> > + extern struct seq_operations proc_pid_smaps_op;
>
> Put extern headers in .h files, not in .c.
Andrew, I did not put the extern headers in .h files, because I
noticed that there are other extern headers in base.c, so I think
would be better follow the code style. If it is necessary to put it in
.h file, which file do I have to put (or create a new one)?
Here goes the new PATCH.
**************************************
PATCH
**************************************
diff -urN linux-2.6.10/fs/proc/base.c linux-2.6.10-smaps/fs/proc/base.c
--- linux-2.6.10/fs/proc/base.c 2004-12-24 17:35:00.000000000 -0400
+++ linux-2.6.10-smaps/fs/proc/base.c 2005-01-14 17:07:30.000000000 -0400
@@ -11,6 +11,18 @@
* go into icache. We cache the reference to task_struct upon lookup too.
* Eventually it should become a filesystem in its own. We don't use the
* rest of procfs anymore.
+ *
+ *
+ * 2005
+ * Allan Bezerra
+ * Bruna Moreira <bruna.moreira@indt.org.br>
+ * Edjard Mota <edjard.mota@indt.org.br>
+ * Ilias Biris <ext-ilias.biris@indt.org.br>
+ * Mauricio Lin <mauricio.lin@indt.org.br>
+ *
+ * Embedded Linux Lab - 10LE Instituto Nokia de Tecnologia - INdT
+ *
+ * A new entry smaps included in /proc. It shows the size of rss for
each memory area.
*/
#include <asm/uaccess.h>
@@ -60,6 +72,7 @@
PROC_TGID_MAPS,
PROC_TGID_MOUNTS,
PROC_TGID_WCHAN,
+ PROC_TGID_SMAPS,
#ifdef CONFIG_SCHEDSTATS
PROC_TGID_SCHEDSTAT,
#endif
@@ -86,6 +99,7 @@
PROC_TID_MAPS,
PROC_TID_MOUNTS,
PROC_TID_WCHAN,
+ PROC_TID_SMAPS,
#ifdef CONFIG_SCHEDSTATS
PROC_TID_SCHEDSTAT,
#endif
@@ -123,6 +137,7 @@
E(PROC_TGID_ROOT, "root", S_IFLNK|S_IRWXUGO),
E(PROC_TGID_EXE, "exe", S_IFLNK|S_IRWXUGO),
E(PROC_TGID_MOUNTS, "mounts", S_IFREG|S_IRUGO),
+ E(PROC_TGID_SMAPS, "smaps", S_IFREG|S_IRUGO),
#ifdef CONFIG_SECURITY
E(PROC_TGID_ATTR, "attr", S_IFDIR|S_IRUGO|S_IXUGO),
#endif
@@ -148,6 +163,7 @@
E(PROC_TID_ROOT, "root", S_IFLNK|S_IRWXUGO),
E(PROC_TID_EXE, "exe", S_IFLNK|S_IRWXUGO),
E(PROC_TID_MOUNTS, "mounts", S_IFREG|S_IRUGO),
+ E(PROC_TID_SMAPS, "smaps", S_IFREG|S_IRUGO),
#ifdef CONFIG_SECURITY
E(PROC_TID_ATTR, "attr", S_IFDIR|S_IRUGO|S_IXUGO),
#endif
@@ -497,6 +513,25 @@
.release = seq_release,
};
+extern struct seq_operations proc_pid_smaps_op;
+static int smaps_open(struct inode *inode, struct file *file)
+{
+ struct task_struct *task = proc_task(inode);
+ int ret = seq_open(file, &proc_pid_smaps_op);
+ if (!ret) {
+ struct seq_file *m = file->private_data;
+ m->private = task;
+ }
+ return ret;
+}
+
+static struct file_operations proc_smaps_operations = {
+ .open = smaps_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = seq_release,
+};
+
extern struct seq_operations mounts_op;
static int mounts_open(struct inode *inode, struct file *file)
{
@@ -1341,6 +1376,11 @@
case PROC_TGID_MOUNTS:
inode->i_fop = &proc_mounts_operations;
break;
+ case PROC_TID_SMAPS:
+ case PROC_TGID_SMAPS:
+ inode->i_fop = &proc_smaps_operations;
+ break;
+
#ifdef CONFIG_SECURITY
case PROC_TID_ATTR:
inode->i_nlink = 2;
diff -urN linux-2.6.10/fs/proc/task_mmu.c linux-2.6.10-smaps/fs/proc/task_mmu.c
--- linux-2.6.10/fs/proc/task_mmu.c 2004-12-24 17:34:01.000000000 -0400
+++ linux-2.6.10-smaps/fs/proc/task_mmu.c 2005-01-14 16:35:38.000000000 -0400
@@ -81,6 +81,72 @@
return 0;
}
+static void resident_mem_size(struct mm_struct *mm, unsigned long
start_address,
+ unsigned long end_address, unsigned long *size) {
+ pgd_t *pgd;
+ pmd_t *pmd;
+ pte_t *ptep, pte;
+ unsigned long each_page;
+
+ for (each_page = start_address; each_page < end_address; each_page
+= PAGE_SIZE) {
+ pgd = pgd_offset(mm, each_page);
+ if (pgd_none(*pgd) || unlikely(pgd_bad(*pgd)))
+ continue;
+
+ pmd = pmd_offset(pgd, each_page);
+
+ if (pmd_none(*pmd))
+ continue;
+
+ if (unlikely(pmd_bad(*pmd)))
+ continue;
+
+ if (pmd_present(*pmd)) {
+ ptep = pte_offset_map(pmd, each_page);
+ if (!ptep)
+ continue;
+ pte = *ptep;
+ pte_unmap(ptep);
+ if (pte_present(pte))
+ *size += PAGE_SIZE;
+ }
+ }
+}
+
+static int show_smap(struct seq_file *m, void *v)
+{
+ struct vm_area_struct *map = v;
+ struct file *file = map->vm_file;
+ int flags = map->vm_flags;
+ struct mm_struct *mm = map->vm_mm;
+ unsigned long rss = 0;
+ unsigned long vma_len = (map->vm_end - map->vm_start) >> 10;
+
+ if (mm) {
+ resident_mem_size(mm, map->vm_start, map->vm_end, &rss);
+ }
+
+ seq_printf(m, "%08lx-%08lx %c%c%c%c ",
+ map->vm_start,
+ map->vm_end,
+ flags & VM_READ ? 'r' : '-',
+ flags & VM_WRITE ? 'w' : '-',
+ flags & VM_EXEC ? 'x' : '-',
+ flags & VM_MAYSHARE ? 's' : 'p');
+
+ if (map->vm_file)
+ seq_path(m, file->f_vfsmnt, file->f_dentry, " \t\n\\");
+
+ seq_putc(m, '\n');
+
+ seq_printf(m, "Size:%8lu kB\n"
+ "Rss:%8lu kB\n",
+ vma_len,
+ rss >> 10);
+
+ return 0;
+}
+
static void *m_start(struct seq_file *m, loff_t *pos)
{
struct task_struct *task = m->private;
@@ -134,3 +200,10 @@
.stop = m_stop,
.show = show_map
};
+
+struct seq_operations proc_pid_smaps_op = {
+ .start = m_start,
+ .next = m_next,
+ .stop = m_stop,
+ .show = show_smap
+};
The smaps was used to verify the memory consumption of gecko rendering
engine and has presented interesting results in a detailed way. Below
is the link to access the graphics generated by the application that
reads from /proc/pid/smaps.
http://www.manaos.org/10le/smaps.html
BR,
Mauricio Lin.
next prev parent reply other threads:[~2005-01-14 22:47 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-01-06 21:11 [PATCH] A new entry for /proc Mauricio Lin
2005-01-07 4:23 ` Andrew Morton
2005-01-07 12:30 ` Roger Luethi
2005-01-08 20:20 ` Hugh Dickins
2005-01-08 21:47 ` Alan Cox
2005-01-10 9:21 ` Edjard Souza Mota
2005-01-10 15:23 ` Mauricio Lin
2005-02-22 13:13 ` Mauricio Lin
2005-02-24 8:31 ` Mauricio Lin
2005-02-24 9:09 ` Andrew Morton
2005-02-24 11:43 ` Mauricio Lin
2005-02-24 11:52 ` Andrew Morton
2005-02-25 15:14 ` Mauricio Lin
2005-02-28 9:43 ` Mauricio Lin
2005-02-28 9:56 ` Mauricio Lin
2005-02-28 20:41 ` Hugh Dickins
2005-03-01 8:08 ` Mauricio Lin
2005-03-01 14:17 ` Mauricio Lin
2005-03-01 15:44 ` Mauricio Lin
2005-03-02 12:20 ` Mauricio Lin
2005-03-02 19:07 ` Hugh Dickins
2005-03-03 7:25 ` Mauricio Lin
2005-03-03 12:48 ` Hugh Dickins
2005-03-03 14:23 ` Mauricio Lin
2005-01-10 14:35 ` Mauricio Lin
2005-01-14 22:46 ` Mauricio Lin [this message]
[not found] ` <20050114154209.6b712e55.akpm@osdl.org>
2005-01-17 18:03 ` Mauricio Lin
2005-01-17 19:02 ` Mauricio Lin
2005-01-17 17:30 ` Marcelo Tosatti
2005-01-17 21:27 ` Mauricio Lin
2005-01-17 21:35 ` William Lee Irwin III
2005-01-18 1:07 ` Nick Piggin
2005-01-19 12:59 ` Nick Piggin
2005-01-24 22:14 ` Mauricio Lin
2005-04-29 18:36 ` Mauricio Lin
2005-04-30 1:25 ` Andrew Morton
-- strict thread matches above, loose matches on Subject: below --
2005-02-24 18:56 Albert Cahalan
2005-03-01 14:32 ` Mauricio Lin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3f250c7105011414466f22fc37@mail.gmail.com \
--to=mauriciolin@gmail.com \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox