From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S265273AbUBALi1 (ORCPT ); Sun, 1 Feb 2004 06:38:27 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S265274AbUBALi1 (ORCPT ); Sun, 1 Feb 2004 06:38:27 -0500 Received: from mail.gmx.de ([213.165.64.20]:3557 "HELO mail.gmx.net") by vger.kernel.org with SMTP id S265273AbUBALhl (ORCPT ); Sun, 1 Feb 2004 06:37:41 -0500 X-Authenticated: #4512188 Message-ID: <401CE4FF.1090804@gmx.de> Date: Sun, 01 Feb 2004 12:37:35 +0100 From: "Prakash K. Cheemplavam" User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.6b) Gecko/20031208 Thunderbird/0.4 X-Accept-Language: en-us, en MIME-Version: 1.0 To: "Prakash K. Cheemplavam" CC: Micha Feigin , linux-kernel@vger.kernel.org, torvalds@osdl.org, akpm@osdl.org Subject: Re: oops with 2.6.1-rc1 and rc-3 References: <1075537924.17730.88.camel@laptop-linux> <401B6F7A.5030103@gmx.de> <1075540107.17727.90.camel@laptop-linux> <401B7312.3060207@gmx.de> <1075542685.25454.124.camel@laptop-linux> <401B86EB.50604@gmx.de> <20040131231134.GA6084@digitasaru.net> <20040201002641.GB31914@luna.mooo.com> <401C5AEC.8060602@gmx.de> <20040201025446.GD32642@luna.mooo.com> <401CD6C4.2040200@gmx.de> In-Reply-To: <401CD6C4.2040200@gmx.de> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Tried now rc2-mm1 and mm2: mm1: boots ok mm2: gives same/similar oops at boot time with libata Prakash Prakash K. Cheemplavam wrote: > Micha Feigin wrote: > >> On Sun, Feb 01, 2004 at 02:48:28AM +0100, Prakash K. Cheemplavam wrote: >> >>> This happened once with rc-1 vanilla and once with rc-3 (haven't used >>> rc2 long enough.) Never happened with a earlier kernel. The message >>> repeats eternally itself making the system next to unusuable. >>> >>> Any idea how to fix it? >>> >>> I am using siimage ide driver. >>> >>> Prakash >>> >>> Feb 1 02:34:48 tachyon handlers: >>> Feb 1 02:34:48 tachyon [] (ide_intr+0x0/0x190) >>> Feb 1 02:34:48 tachyon [] (snd_intel8x0_interrupt+0x0/0x210) >>> Feb 1 02:34:48 tachyon Disabling IRQ #11 >>> Feb 1 02:34:48 tachyon irq 11: nobody cared! >> >> >> >> This irq message has been reported by several people (including me), I >> don't think there is a solution yet. AFAIK its not swsusp related. > > > Yes, it is NOT swsusp related. > >> >>> Feb 1 02:34:48 tachyon Call Trace: >>> Feb 1 02:34:48 tachyon [] __report_bad_irq+0x2a/0x90 >>> Feb 1 02:34:48 tachyon [] note_interrupt+0x6c/0xb0 >>> Feb 1 02:34:48 tachyon [] do_IRQ+0x121/0x130 >>> Feb 1 02:34:48 tachyon [] common_interrupt+0x18/0x20 >>> Feb 1 02:34:48 tachyon [] do_softirq+0x40/0xa0 >>> Feb 1 02:34:48 tachyon [] do_IRQ+0xfd/0x130 >>> Feb 1 02:34:48 tachyon [] common_interrupt+0x18/0x20 >>> Feb 1 02:34:48 tachyon [] generic_unplug_device+0x26/0x80 >>> Feb 1 02:34:48 tachyon [] blk_run_queues+0x7a/0xb0 >>> Feb 1 02:34:48 tachyon [] __wait_on_buffer+0xbf/0xd0 >>> Feb 1 02:34:48 tachyon [] autoremove_wake_function+0x0/0x50 >>> Feb 1 02:34:48 tachyon [] autoremove_wake_function+0x0/0x50 >>> Feb 1 02:34:48 tachyon [] submit_logged_buffer+0x38/0x60 >>> Feb 1 02:34:48 tachyon [] kupdate_one_transaction+0x1b3/0x210 >>> Feb 1 02:34:48 tachyon [] reiserfs_journal_kupdate+0x75/0xb0 >>> Feb 1 02:34:48 tachyon [] flush_old_commits+0x144/0x1d0 >>> Feb 1 02:34:48 tachyon [] do_exit+0x293/0x500 >>> Feb 1 02:34:48 tachyon [] reiserfs_write_super+0x82/0x90 >>> Feb 1 02:34:48 tachyon [] sync_supers+0xac/0xc0 >>> Feb 1 02:34:48 tachyon [] wb_kupdate+0x36/0x120 >>> Feb 1 02:34:48 tachyon [] tty_write+0x1d3/0x3f0 >>> Feb 1 02:34:48 tachyon [] tty_read+0x18e/0x200 >>> Feb 1 02:34:48 tachyon [] schedule+0x31d/0x590 >>> Feb 1 02:34:48 tachyon [] reparent_to_init+0xf0/0x180 >>> Feb 1 02:34:48 tachyon [] __pdflush+0xcb/0x1b0 >>> Feb 1 02:34:48 tachyon [] pdflush+0x0/0x20 >>> Feb 1 02:34:48 tachyon [] pdflush+0xf/0x20 >>> Feb 1 02:34:48 tachyon [] wb_kupdate+0x0/0x120 >>> Feb 1 02:34:48 tachyon [] kernel_thread_helper+0x0/0xc >>> Feb 1 02:34:48 tachyon [] kernel_thread_helper+0x5/0xc >>> Feb 1 02:34:48 tachyon >> >> >> >> I didn't check it in the kernel but at first sight it looks like >> regular disks updates. I don't know what it goes into a loop. Are you >> sure that you don't have something that keeps updating the disk? > > > Nope, as I investigated further: I tried using libata and then rc3 > already hang at boot - just after libata init - with above (or similar) > oops. rc2 did the same. Only rc1 did boot and I am currently using it to > see ho far it goes. > > So there seems to be some serious issue since 2.6.2-rc2 going on. Maybe > some ACPI related update? > > I attached my .config, in case if it of interest. > > Prakash > > > ------------------------------------------------------------------------ > > # > # Automatically generated make config: don't edit > # > CONFIG_X86=y > CONFIG_MMU=y > CONFIG_UID16=y > CONFIG_GENERIC_ISA_DMA=y > > # > # Code maturity level options > # > CONFIG_EXPERIMENTAL=y > # CONFIG_CLEAN_COMPILE is not set > # CONFIG_STANDALONE is not set > CONFIG_BROKEN=y > CONFIG_BROKEN_ON_SMP=y > > # > # General setup > # > CONFIG_SWAP=y > CONFIG_SYSVIPC=y > # CONFIG_BSD_PROCESS_ACCT is not set > CONFIG_SYSCTL=y > CONFIG_LOG_BUF_SHIFT=14 > # CONFIG_IKCONFIG is not set > # CONFIG_EMBEDDED is not set > CONFIG_KALLSYMS=y > CONFIG_FUTEX=y > CONFIG_EPOLL=y > CONFIG_IOSCHED_NOOP=y > CONFIG_IOSCHED_AS=y > CONFIG_IOSCHED_DEADLINE=y > # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set > > # > # Loadable module support > # > CONFIG_MODULES=y > CONFIG_MODULE_UNLOAD=y > # CONFIG_MODULE_FORCE_UNLOAD is not set > CONFIG_OBSOLETE_MODPARM=y > # CONFIG_MODVERSIONS is not set > CONFIG_KMOD=y > > # > # Processor type and features > # > CONFIG_X86_PC=y > # CONFIG_X86_VOYAGER is not set > # CONFIG_X86_NUMAQ is not set > # CONFIG_X86_SUMMIT is not set > # CONFIG_X86_BIGSMP is not set > # CONFIG_X86_VISWS is not set > # CONFIG_X86_GENERICARCH is not set > # CONFIG_X86_ES7000 is not set > # CONFIG_M386 is not set > # CONFIG_M486 is not set > # CONFIG_M586 is not set > # CONFIG_M586TSC is not set > # CONFIG_M586MMX is not set > # CONFIG_M686 is not set > # CONFIG_MPENTIUMII is not set > # CONFIG_MPENTIUMIII is not set > # CONFIG_MPENTIUM4 is not set > # CONFIG_MK6 is not set > CONFIG_MK7=y > # CONFIG_MK8 is not set > # CONFIG_MELAN is not set > # CONFIG_MCRUSOE is not set > # CONFIG_MWINCHIPC6 is not set > # CONFIG_MWINCHIP2 is not set > # CONFIG_MWINCHIP3D is not set > # CONFIG_MCYRIXIII is not set > # CONFIG_MVIAC3_2 is not set > # CONFIG_X86_GENERIC is not set > CONFIG_X86_CMPXCHG=y > CONFIG_X86_XADD=y > CONFIG_X86_L1_CACHE_SHIFT=6 > CONFIG_RWSEM_XCHGADD_ALGORITHM=y > CONFIG_X86_WP_WORKS_OK=y > CONFIG_X86_INVLPG=y > CONFIG_X86_BSWAP=y > CONFIG_X86_POPAD_OK=y > CONFIG_X86_GOOD_APIC=y > CONFIG_X86_INTEL_USERCOPY=y > CONFIG_X86_USE_PPRO_CHECKSUM=y > CONFIG_X86_USE_3DNOW=y > CONFIG_HPET_TIMER=y > CONFIG_HPET_EMULATE_RTC=y > # CONFIG_SMP is not set > CONFIG_PREEMPT=y > # CONFIG_X86_UP_APIC is not set > CONFIG_X86_TSC=y > CONFIG_X86_MCE=y > CONFIG_X86_MCE_NONFATAL=y > # CONFIG_TOSHIBA is not set > # CONFIG_I8K is not set > CONFIG_MICROCODE=y > CONFIG_X86_MSR=y > CONFIG_X86_CPUID=y > # CONFIG_EDD is not set > # CONFIG_NOHIGHMEM is not set > CONFIG_HIGHMEM4G=y > # CONFIG_HIGHMEM64G is not set > CONFIG_HIGHMEM=y > CONFIG_HIGHPTE=y > # CONFIG_MATH_EMULATION is not set > CONFIG_MTRR=y > # CONFIG_EFI is not set > CONFIG_HAVE_DEC_LOCK=y > > # > # Power management options (ACPI, APM) > # > CONFIG_PM=y > # CONFIG_SOFTWARE_SUSPEND is not set > # CONFIG_PM_DISK is not set > > # > # ACPI (Advanced Configuration and Power Interface) Support > # > CONFIG_ACPI=y > CONFIG_ACPI_BOOT=y > CONFIG_ACPI_INTERPRETER=y > CONFIG_ACPI_SLEEP=y > CONFIG_ACPI_SLEEP_PROC_FS=y > CONFIG_ACPI_AC=y > CONFIG_ACPI_BATTERY=y > CONFIG_ACPI_BUTTON=y > CONFIG_ACPI_FAN=y > CONFIG_ACPI_PROCESSOR=y > CONFIG_ACPI_THERMAL=y > # CONFIG_ACPI_ASUS is not set > # CONFIG_ACPI_TOSHIBA is not set > # CONFIG_ACPI_DEBUG is not set > CONFIG_ACPI_BUS=y > CONFIG_ACPI_EC=y > CONFIG_ACPI_POWER=y > CONFIG_ACPI_PCI=y > CONFIG_ACPI_SYSTEM=y > # CONFIG_ACPI_RELAXED_AML is not set > > # > # APM (Advanced Power Management) BIOS Support > # > CONFIG_APM=y > # CONFIG_APM_IGNORE_USER_SUSPEND is not set > # CONFIG_APM_DO_ENABLE is not set > CONFIG_APM_CPU_IDLE=y > # CONFIG_APM_DISPLAY_BLANK is not set > # CONFIG_APM_RTC_IS_GMT is not set > # CONFIG_APM_ALLOW_INTS is not set > # CONFIG_APM_REAL_MODE_POWER_OFF is not set > > # > # CPU Frequency scaling > # > # CONFIG_CPU_FREQ is not set > > # > # Bus options (PCI, PCMCIA, EISA, MCA, ISA) > # > CONFIG_PCI=y > # CONFIG_PCI_GOBIOS is not set > # CONFIG_PCI_GODIRECT is not set > CONFIG_PCI_GOANY=y > CONFIG_PCI_BIOS=y > CONFIG_PCI_DIRECT=y > CONFIG_PCI_LEGACY_PROC=y > CONFIG_PCI_NAMES=y > CONFIG_ISA=y > # CONFIG_EISA is not set > # CONFIG_MCA is not set > # CONFIG_SCx200 is not set > CONFIG_HOTPLUG=y > > # > # PCMCIA/CardBus support > # > # CONFIG_PCMCIA is not set > CONFIG_PCMCIA_PROBE=y > > # > # PCI Hotplug Support > # > # CONFIG_HOTPLUG_PCI is not set > > # > # Executable file formats > # > CONFIG_BINFMT_ELF=y > CONFIG_BINFMT_AOUT=y > CONFIG_BINFMT_MISC=y > > # > # Device Drivers > # > > # > # Generic Driver Options > # > # CONFIG_FW_LOADER is not set > > # > # Memory Technology Devices (MTD) > # > # CONFIG_MTD is not set > > # > # Parallel port support > # > # CONFIG_PARPORT is not set > > # > # Plug and Play support > # > CONFIG_PNP=y > # CONFIG_PNP_DEBUG is not set > > # > # Protocols > # > # CONFIG_ISAPNP is not set > # CONFIG_PNPBIOS is not set > > # > # Block devices > # > CONFIG_BLK_DEV_FD=y > # CONFIG_BLK_DEV_XD is not set > # CONFIG_BLK_CPQ_DA is not set > # CONFIG_BLK_CPQ_CISS_DA is not set > # CONFIG_BLK_DEV_DAC960 is not set > # CONFIG_BLK_DEV_UMEM is not set > CONFIG_BLK_DEV_LOOP=y > # CONFIG_BLK_DEV_CRYPTOLOOP is not set > # CONFIG_BLK_DEV_NBD is not set > # CONFIG_BLK_DEV_RAM is not set > CONFIG_BLK_DEV_INITRD=y > CONFIG_LBD=y > > # > # ATA/ATAPI/MFM/RLL support > # > CONFIG_IDE=y > CONFIG_BLK_DEV_IDE=y > > # > # Please see Documentation/ide.txt for help/info on IDE drives > # > # CONFIG_BLK_DEV_HD_IDE is not set > CONFIG_BLK_DEV_IDEDISK=y > CONFIG_IDEDISK_MULTI_MODE=y > # CONFIG_IDEDISK_STROKE is not set > CONFIG_BLK_DEV_IDECD=y > # CONFIG_BLK_DEV_IDETAPE is not set > CONFIG_BLK_DEV_IDEFLOPPY=y > # CONFIG_BLK_DEV_IDESCSI is not set > CONFIG_IDE_TASK_IOCTL=y > CONFIG_IDE_TASKFILE_IO=y > > # > # IDE chipset support/bugfixes > # > # CONFIG_BLK_DEV_CMD640 is not set > # CONFIG_BLK_DEV_IDEPNP is not set > CONFIG_BLK_DEV_IDEPCI=y > CONFIG_IDEPCI_SHARE_IRQ=y > # CONFIG_BLK_DEV_OFFBOARD is not set > # CONFIG_BLK_DEV_GENERIC is not set > # CONFIG_BLK_DEV_OPTI621 is not set > # CONFIG_BLK_DEV_RZ1000 is not set > CONFIG_BLK_DEV_IDEDMA_PCI=y > # CONFIG_BLK_DEV_IDEDMA_FORCED is not set > CONFIG_IDEDMA_PCI_AUTO=y > # CONFIG_IDEDMA_ONLYDISK is not set > # CONFIG_IDEDMA_PCI_WIP is not set > CONFIG_BLK_DEV_ADMA=y > # CONFIG_BLK_DEV_AEC62XX is not set > # CONFIG_BLK_DEV_ALI15X3 is not set > CONFIG_BLK_DEV_AMD74XX=y > # CONFIG_BLK_DEV_CMD64X is not set > # CONFIG_BLK_DEV_TRIFLEX is not set > # CONFIG_BLK_DEV_CY82C693 is not set > # CONFIG_BLK_DEV_CS5520 is not set > # CONFIG_BLK_DEV_CS5530 is not set > # CONFIG_BLK_DEV_HPT34X is not set > # CONFIG_BLK_DEV_HPT366 is not set > # CONFIG_BLK_DEV_SC1200 is not set > # CONFIG_BLK_DEV_PIIX is not set > # CONFIG_BLK_DEV_NS87415 is not set > # CONFIG_BLK_DEV_PDC202XX_OLD is not set > # CONFIG_BLK_DEV_PDC202XX_NEW is not set > # CONFIG_BLK_DEV_SVWKS is not set > # CONFIG_BLK_DEV_SIIMAGE is not set > # CONFIG_BLK_DEV_SIS5513 is not set > # CONFIG_BLK_DEV_SLC90E66 is not set > # CONFIG_BLK_DEV_TRM290 is not set > # CONFIG_BLK_DEV_VIA82CXXX is not set > # CONFIG_IDE_CHIPSETS is not set > CONFIG_BLK_DEV_IDEDMA=y > # CONFIG_IDEDMA_IVB is not set > CONFIG_IDEDMA_AUTO=y > # CONFIG_DMA_NONPCI is not set > # CONFIG_BLK_DEV_HD is not set > > # > # SCSI device support > # > CONFIG_SCSI=y > CONFIG_SCSI_PROC_FS=y > > # > # SCSI support type (disk, tape, CD-ROM) > # > CONFIG_BLK_DEV_SD=y > # CONFIG_CHR_DEV_ST is not set > # CONFIG_CHR_DEV_OSST is not set > # CONFIG_BLK_DEV_SR is not set > # CONFIG_CHR_DEV_SG is not set > > # > # Some SCSI devices (e.g. CD jukebox) support multiple LUNs > # > # CONFIG_SCSI_MULTI_LUN is not set > # CONFIG_SCSI_REPORT_LUNS is not set > # CONFIG_SCSI_CONSTANTS is not set > # CONFIG_SCSI_LOGGING is not set > > # > # SCSI low-level drivers > # > # CONFIG_BLK_DEV_3W_XXXX_RAID is not set > # CONFIG_SCSI_7000FASST is not set > # CONFIG_SCSI_ACARD is not set > # CONFIG_SCSI_AHA152X is not set > # CONFIG_SCSI_AHA1542 is not set > # CONFIG_SCSI_AACRAID is not set > # CONFIG_SCSI_AIC7XXX is not set > # CONFIG_SCSI_AIC7XXX_OLD is not set > # CONFIG_SCSI_AIC79XX is not set > # CONFIG_SCSI_DPT_I2O is not set > # CONFIG_SCSI_ADVANSYS is not set > # CONFIG_SCSI_IN2000 is not set > # CONFIG_SCSI_AM53C974 is not set > # CONFIG_SCSI_MEGARAID is not set > CONFIG_SCSI_SATA=y > # CONFIG_SCSI_SATA_SVW is not set > # CONFIG_SCSI_ATA_PIIX is not set > # CONFIG_SCSI_SATA_PROMISE is not set > CONFIG_SCSI_SATA_SIL=y > # CONFIG_SCSI_SATA_VIA is not set > # CONFIG_SCSI_BUSLOGIC is not set > # CONFIG_SCSI_CPQFCTS is not set > # CONFIG_SCSI_DMX3191D is not set > # CONFIG_SCSI_DTC3280 is not set > # CONFIG_SCSI_EATA is not set > # CONFIG_SCSI_EATA_PIO is not set > # CONFIG_SCSI_FUTURE_DOMAIN is not set > # CONFIG_SCSI_GDTH is not set > # CONFIG_SCSI_GENERIC_NCR5380 is not set > # CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set > # CONFIG_SCSI_IPS is not set > # CONFIG_SCSI_INITIO is not set > # CONFIG_SCSI_INIA100 is not set > # CONFIG_SCSI_NCR53C406A is not set > # CONFIG_SCSI_SYM53C8XX_2 is not set > # CONFIG_SCSI_PAS16 is not set > # CONFIG_SCSI_PCI2000 is not set > # CONFIG_SCSI_PCI2220I is not set > # CONFIG_SCSI_PSI240I is not set > # CONFIG_SCSI_QLOGIC_FAS is not set > # CONFIG_SCSI_QLOGIC_ISP is not set > # CONFIG_SCSI_QLOGIC_FC is not set > # CONFIG_SCSI_QLOGIC_1280 is not set > CONFIG_SCSI_QLA2XXX_CONFIG=y > # CONFIG_SCSI_QLA21XX is not set > # CONFIG_SCSI_QLA22XX is not set > # CONFIG_SCSI_QLA23XX is not set > # CONFIG_SCSI_SEAGATE is not set > # CONFIG_SCSI_SYM53C416 is not set > # CONFIG_SCSI_DC395x is not set > # CONFIG_SCSI_DC390T is not set > # CONFIG_SCSI_T128 is not set > # CONFIG_SCSI_U14_34F is not set > # CONFIG_SCSI_ULTRASTOR is not set > # CONFIG_SCSI_NSP32 is not set > # CONFIG_SCSI_DEBUG is not set > > # > # Old CD-ROM drivers (not SCSI, not IDE) > # > # CONFIG_CD_NO_IDESCSI is not set > > # > # Multi-device support (RAID and LVM) > # > # CONFIG_MD is not set > > # > # Fusion MPT device support > # > # CONFIG_FUSION is not set > > # > # IEEE 1394 (FireWire) support (EXPERIMENTAL) > # > # CONFIG_IEEE1394 is not set > > # > # I2O device support > # > CONFIG_I2O=y > CONFIG_I2O_PCI=y > # CONFIG_I2O_BLOCK is not set > # CONFIG_I2O_SCSI is not set > CONFIG_I2O_PROC=y > > # > # Networking support > # > CONFIG_NET=y > > # > # Networking options > # > CONFIG_PACKET=y > # CONFIG_PACKET_MMAP is not set > # CONFIG_NETLINK_DEV is not set > CONFIG_UNIX=y > # CONFIG_NET_KEY is not set > CONFIG_INET=y > CONFIG_IP_MULTICAST=y > # CONFIG_IP_ADVANCED_ROUTER is not set > # CONFIG_IP_PNP is not set > # CONFIG_NET_IPIP is not set > # CONFIG_NET_IPGRE is not set > # CONFIG_IP_MROUTE is not set > # CONFIG_ARPD is not set > # CONFIG_INET_ECN is not set > # CONFIG_SYN_COOKIES is not set > # CONFIG_INET_AH is not set > # CONFIG_INET_ESP is not set > # CONFIG_INET_IPCOMP is not set > # CONFIG_IPV6 is not set > # CONFIG_DECNET is not set > # CONFIG_BRIDGE is not set > # CONFIG_NETFILTER is not set > > # > # SCTP Configuration (EXPERIMENTAL) > # > CONFIG_IPV6_SCTP__=y > # CONFIG_IP_SCTP is not set > # CONFIG_ATM is not set > # CONFIG_VLAN_8021Q is not set > # CONFIG_LLC2 is not set > # CONFIG_IPX is not set > # CONFIG_ATALK is not set > # CONFIG_X25 is not set > # CONFIG_LAPB is not set > # CONFIG_NET_DIVERT is not set > # CONFIG_ECONET is not set > # CONFIG_WAN_ROUTER is not set > # CONFIG_NET_FASTROUTE is not set > # CONFIG_NET_HW_FLOWCONTROL is not set > > # > # QoS and/or fair queueing > # > # CONFIG_NET_SCHED is not set > > # > # Network testing > # > # CONFIG_NET_PKTGEN is not set > CONFIG_NETDEVICES=y > > # > # ARCnet devices > # > # CONFIG_ARCNET is not set > CONFIG_DUMMY=y > # CONFIG_BONDING is not set > # CONFIG_EQUALIZER is not set > # CONFIG_TUN is not set > # CONFIG_NET_SB1000 is not set > > # > # Ethernet (10 or 100Mbit) > # > CONFIG_NET_ETHERNET=y > # CONFIG_MII is not set > # CONFIG_HAPPYMEAL is not set > # CONFIG_SUNGEM is not set > # CONFIG_NET_VENDOR_3COM is not set > # CONFIG_LANCE is not set > # CONFIG_NET_VENDOR_SMC is not set > # CONFIG_NET_VENDOR_RACAL is not set > > # > # Tulip family network device support > # > # CONFIG_NET_TULIP is not set > # CONFIG_AT1700 is not set > # CONFIG_DEPCA is not set > # CONFIG_HP100 is not set > # CONFIG_NET_ISA is not set > CONFIG_NET_PCI=y > # CONFIG_PCNET32 is not set > # CONFIG_AMD8111_ETH is not set > # CONFIG_ADAPTEC_STARFIRE is not set > # CONFIG_AC3200 is not set > # CONFIG_APRICOT is not set > # CONFIG_B44 is not set > CONFIG_FORCEDETH=y > # CONFIG_CS89x0 is not set > # CONFIG_DGRS is not set > # CONFIG_EEPRO100 is not set > # CONFIG_E100 is not set > # CONFIG_FEALNX is not set > # CONFIG_NATSEMI is not set > # CONFIG_NE2K_PCI is not set > # CONFIG_8139CP is not set > # CONFIG_8139TOO is not set > # CONFIG_SIS900 is not set > # CONFIG_EPIC100 is not set > # CONFIG_SUNDANCE is not set > # CONFIG_TLAN is not set > # CONFIG_VIA_RHINE is not set > # CONFIG_NET_POCKET is not set > > # > # Ethernet (1000 Mbit) > # > # CONFIG_ACENIC is not set > # CONFIG_DL2K is not set > # CONFIG_E1000 is not set > # CONFIG_NS83820 is not set > # CONFIG_HAMACHI is not set > # CONFIG_YELLOWFIN is not set > # CONFIG_R8169 is not set > # CONFIG_SIS190 is not set > # CONFIG_SK98LIN is not set > # CONFIG_TIGON3 is not set > > # > # Ethernet (10000 Mbit) > # > # CONFIG_IXGB is not set > # CONFIG_FDDI is not set > # CONFIG_HIPPI is not set > # CONFIG_PPP is not set > # CONFIG_SLIP is not set > > # > # Wireless LAN (non-hamradio) > # > # CONFIG_NET_RADIO is not set > > # > # Token Ring devices > # > # CONFIG_TR is not set > # CONFIG_NET_FC is not set > # CONFIG_RCPCI is not set > # CONFIG_SHAPER is not set > > # > # Wan interfaces > # > # CONFIG_WAN is not set > > # > # Amateur Radio support > # > # CONFIG_HAMRADIO is not set > > # > # IrDA (infrared) support > # > # CONFIG_IRDA is not set > > # > # Bluetooth support > # > # CONFIG_BT is not set > > # > # ISDN subsystem > # > # CONFIG_ISDN_BOOL is not set > > # > # Telephony Support > # > # CONFIG_PHONE is not set > > # > # Input device support > # > CONFIG_INPUT=y > > # > # Userland interfaces > # > CONFIG_INPUT_MOUSEDEV=y > CONFIG_INPUT_MOUSEDEV_PSAUX=y > CONFIG_INPUT_MOUSEDEV_SCREEN_X=1280 > CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1024 > # CONFIG_INPUT_JOYDEV is not set > # CONFIG_INPUT_TSDEV is not set > CONFIG_INPUT_EVDEV=y > # CONFIG_INPUT_EVBUG is not set > > # > # Input I/O drivers > # > # CONFIG_GAMEPORT is not set > CONFIG_SOUND_GAMEPORT=y > CONFIG_SERIO=y > CONFIG_SERIO_I8042=y > # CONFIG_SERIO_SERPORT is not set > # CONFIG_SERIO_CT82C710 is not set > # CONFIG_SERIO_PCIPS2 is not set > > # > # Input Device Drivers > # > CONFIG_INPUT_KEYBOARD=y > CONFIG_KEYBOARD_ATKBD=y > # CONFIG_KEYBOARD_SUNKBD is not set > # CONFIG_KEYBOARD_XTKBD is not set > # CONFIG_KEYBOARD_NEWTON is not set > CONFIG_INPUT_MOUSE=y > CONFIG_MOUSE_PS2=y > # CONFIG_MOUSE_SERIAL is not set > # CONFIG_MOUSE_INPORT is not set > # CONFIG_MOUSE_LOGIBM is not set > # CONFIG_MOUSE_PC110PAD is not set > # CONFIG_INPUT_JOYSTICK is not set > # CONFIG_INPUT_TOUCHSCREEN is not set > # CONFIG_INPUT_MISC is not set > > # > # Character devices > # > CONFIG_VT=y > CONFIG_VT_CONSOLE=y > CONFIG_HW_CONSOLE=y > # CONFIG_SERIAL_NONSTANDARD is not set > > # > # Serial drivers > # > CONFIG_SERIAL_8250=y > # CONFIG_SERIAL_8250_CONSOLE is not set > # CONFIG_SERIAL_8250_ACPI is not set > CONFIG_SERIAL_8250_NR_UARTS=4 > # CONFIG_SERIAL_8250_EXTENDED is not set > > # > # Non-8250 serial port support > # > CONFIG_SERIAL_CORE=y > CONFIG_UNIX98_PTYS=y > CONFIG_UNIX98_PTY_COUNT=256 > > # > # Mice > # > # CONFIG_BUSMOUSE is not set > # CONFIG_QIC02_TAPE is not set > > # > # IPMI > # > # CONFIG_IPMI_HANDLER is not set > > # > # Watchdog Cards > # > # CONFIG_WATCHDOG is not set > # CONFIG_HW_RANDOM is not set > CONFIG_NVRAM=y > CONFIG_RTC=y > # CONFIG_DTLK is not set > # CONFIG_R3964 is not set > # CONFIG_APPLICOM is not set > # CONFIG_SONYPI is not set > > # > # Ftape, the floppy tape device driver > # > # CONFIG_FTAPE is not set > # CONFIG_AGP is not set > # CONFIG_DRM is not set > # CONFIG_MWAVE is not set > # CONFIG_RAW_DRIVER is not set > # CONFIG_HANGCHECK_TIMER is not set > > # > # I2C support > # > CONFIG_I2C=y > CONFIG_I2C_CHARDEV=y > > # > # I2C Algorithms > # > CONFIG_I2C_ALGOBIT=y > # CONFIG_I2C_ALGOPCF is not set > > # > # I2C Hardware Bus support > # > # CONFIG_I2C_ALI1535 is not set > # CONFIG_I2C_ALI15X3 is not set > # CONFIG_I2C_AMD756 is not set > # CONFIG_I2C_AMD8111 is not set > # CONFIG_I2C_ELEKTOR is not set > # CONFIG_I2C_ELV is not set > # CONFIG_I2C_I801 is not set > # CONFIG_I2C_I810 is not set > # CONFIG_I2C_ISA is not set > CONFIG_I2C_NFORCE2=y > # CONFIG_I2C_PARPORT_LIGHT is not set > # CONFIG_I2C_PIIX4 is not set > # CONFIG_I2C_PROSAVAGE is not set > # CONFIG_I2C_SAVAGE4 is not set > # CONFIG_SCx200_ACB is not set > # CONFIG_I2C_SIS5595 is not set > # CONFIG_I2C_SIS630 is not set > # CONFIG_I2C_SIS96X is not set > # CONFIG_I2C_VELLEMAN is not set > # CONFIG_I2C_VIA is not set > # CONFIG_I2C_VIAPRO is not set > # CONFIG_I2C_VOODOO3 is not set > > # > # I2C Hardware Sensors Chip support > # > CONFIG_I2C_SENSOR=y > # CONFIG_SENSORS_ADM1021 is not set > # CONFIG_SENSORS_ASB100 is not set > # CONFIG_SENSORS_EEPROM is not set > # CONFIG_SENSORS_IT87 is not set > CONFIG_SENSORS_LM75=y > # CONFIG_SENSORS_LM78 is not set > # CONFIG_SENSORS_LM83 is not set > # CONFIG_SENSORS_LM85 is not set > # CONFIG_SENSORS_LM90 is not set > # CONFIG_SENSORS_VIA686A is not set > CONFIG_SENSORS_W83781D=y > # CONFIG_SENSORS_W83L785TS is not set > # CONFIG_I2C_DEBUG_CORE is not set > # CONFIG_I2C_DEBUG_BUS is not set > # CONFIG_I2C_DEBUG_CHIP is not set > > # > # Multimedia devices > # > # CONFIG_VIDEO_DEV is not set > > # > # Digital Video Broadcasting Devices > # > CONFIG_DVB=y > CONFIG_DVB_CORE=y > > # > # Supported Frontend Modules > # > # CONFIG_DVB_TWINHAN_DST is not set > # CONFIG_DVB_STV0299 is not set > # CONFIG_DVB_SP887X is not set > # CONFIG_DVB_ALPS_TDLB7 is not set > # CONFIG_DVB_ALPS_TDMB7 is not set > # CONFIG_DVB_ATMEL_AT76C651 is not set > # CONFIG_DVB_CX24110 is not set > # CONFIG_DVB_GRUNDIG_29504_491 is not set > # CONFIG_DVB_GRUNDIG_29504_401 is not set > CONFIG_DVB_MT312=y > # CONFIG_DVB_VES1820 is not set > # CONFIG_DVB_VES1X93 is not set > # CONFIG_DVB_TDA1004X is not set > > # > # Supported SAA7146 based PCI Adapters > # > # CONFIG_DVB_AV7110 is not set > # CONFIG_DVB_BUDGET is not set > # CONFIG_DVB_BUDGET_CI is not set > # CONFIG_DVB_BUDGET_AV is not set > > # > # Supported USB Adapters > # > # CONFIG_DVB_TTUSB_BUDGET is not set > # CONFIG_DVB_TTUSB_DEC is not set > > # > # Supported FlexCopII (B2C2) Adapters > # > CONFIG_DVB_B2C2_SKYSTAR=y > > # > # Supported BT878 Adapters > # > > # > # Graphics support > # > CONFIG_FB=y > # CONFIG_FB_CIRRUS is not set > # CONFIG_FB_PM2 is not set > # CONFIG_FB_CYBER2000 is not set > # CONFIG_FB_IMSTT is not set > # CONFIG_FB_VGA16 is not set > CONFIG_FB_VESA=y > CONFIG_VIDEO_SELECT=y > # CONFIG_FB_HGA is not set > # CONFIG_FB_RIVA is not set > # CONFIG_FB_MATROX is not set > # CONFIG_FB_RADEON is not set > # CONFIG_FB_ATY128 is not set > # CONFIG_FB_ATY is not set > # CONFIG_FB_SIS is not set > # CONFIG_FB_NEOMAGIC is not set > # CONFIG_FB_KYRO is not set > # CONFIG_FB_3DFX is not set > # CONFIG_FB_VOODOO1 is not set > # CONFIG_FB_TRIDENT is not set > # CONFIG_FB_PM3 is not set > # CONFIG_FB_VIRTUAL is not set > > # > # Console display driver support > # > CONFIG_VGA_CONSOLE=y > # CONFIG_MDA_CONSOLE is not set > CONFIG_DUMMY_CONSOLE=y > CONFIG_FRAMEBUFFER_CONSOLE=y > CONFIG_PCI_CONSOLE=y > # CONFIG_FONTS is not set > CONFIG_FONT_8x8=y > CONFIG_FONT_8x16=y > > # > # Logo configuration > # > CONFIG_LOGO=y > # CONFIG_LOGO_LINUX_MONO is not set > # CONFIG_LOGO_LINUX_VGA16 is not set > CONFIG_LOGO_LINUX_CLUT224=y > > # > # Sound > # > CONFIG_SOUND=y > > # > # Advanced Linux Sound Architecture > # > CONFIG_SND=y > CONFIG_SND_SEQUENCER=y > # CONFIG_SND_SEQ_DUMMY is not set > CONFIG_SND_OSSEMUL=y > CONFIG_SND_MIXER_OSS=y > CONFIG_SND_PCM_OSS=y > CONFIG_SND_SEQUENCER_OSS=y > CONFIG_SND_RTCTIMER=y > # CONFIG_SND_VERBOSE_PRINTK is not set > # CONFIG_SND_DEBUG is not set > > # > # Generic devices > # > # CONFIG_SND_DUMMY is not set > # CONFIG_SND_VIRMIDI is not set > # CONFIG_SND_MTPAV is not set > # CONFIG_SND_SERIAL_U16550 is not set > # CONFIG_SND_MPU401 is not set > > # > # ISA devices > # > # CONFIG_SND_AD1848 is not set > # CONFIG_SND_CS4231 is not set > # CONFIG_SND_CS4232 is not set > # CONFIG_SND_CS4236 is not set > # CONFIG_SND_ES1688 is not set > # CONFIG_SND_ES18XX is not set > # CONFIG_SND_GUSCLASSIC is not set > # CONFIG_SND_GUSEXTREME is not set > # CONFIG_SND_GUSMAX is not set > # CONFIG_SND_INTERWAVE is not set > # CONFIG_SND_INTERWAVE_STB is not set > # CONFIG_SND_OPTI92X_AD1848 is not set > # CONFIG_SND_OPTI92X_CS4231 is not set > # CONFIG_SND_OPTI93X is not set > # CONFIG_SND_SB8 is not set > # CONFIG_SND_SB16 is not set > # CONFIG_SND_SBAWE is not set > # CONFIG_SND_WAVEFRONT is not set > # CONFIG_SND_CMI8330 is not set > # CONFIG_SND_OPL3SA2 is not set > # CONFIG_SND_SGALAXY is not set > # CONFIG_SND_SSCAPE is not set > > # > # PCI devices > # > # CONFIG_SND_ALI5451 is not set > # CONFIG_SND_AZT3328 is not set > # CONFIG_SND_CS46XX is not set > # CONFIG_SND_CS4281 is not set > # CONFIG_SND_EMU10K1 is not set > # CONFIG_SND_KORG1212 is not set > # CONFIG_SND_NM256 is not set > # CONFIG_SND_RME32 is not set > # CONFIG_SND_RME96 is not set > # CONFIG_SND_RME9652 is not set > # CONFIG_SND_HDSP is not set > # CONFIG_SND_TRIDENT is not set > # CONFIG_SND_YMFPCI is not set > # CONFIG_SND_ALS4000 is not set > # CONFIG_SND_CMIPCI is not set > # CONFIG_SND_ENS1370 is not set > # CONFIG_SND_ENS1371 is not set > # CONFIG_SND_ES1938 is not set > # CONFIG_SND_ES1968 is not set > # CONFIG_SND_MAESTRO3 is not set > # CONFIG_SND_FM801 is not set > # CONFIG_SND_ICE1712 is not set > # CONFIG_SND_ICE1724 is not set > CONFIG_SND_INTEL8X0=y > # CONFIG_SND_SONICVIBES is not set > # CONFIG_SND_VIA82XX is not set > # CONFIG_SND_VX222 is not set > > # > # ALSA USB devices > # > # CONFIG_SND_USB_AUDIO is not set > > # > # Open Sound System > # > # CONFIG_SOUND_PRIME is not set > > # > # USB support > # > CONFIG_USB=m > # CONFIG_USB_DEBUG is not set > > # > # Miscellaneous USB options > # > CONFIG_USB_DEVICEFS=y > # CONFIG_USB_BANDWIDTH is not set > # CONFIG_USB_DYNAMIC_MINORS is not set > > # > # USB Host Controller Drivers > # > # CONFIG_USB_EHCI_HCD is not set > CONFIG_USB_OHCI_HCD=m > # CONFIG_USB_UHCI_HCD is not set > > # > # USB Device Class drivers > # > # CONFIG_USB_AUDIO is not set > # CONFIG_USB_BLUETOOTH_TTY is not set > # CONFIG_USB_MIDI is not set > # CONFIG_USB_ACM is not set > CONFIG_USB_PRINTER=m > # CONFIG_USB_STORAGE is not set > > # > # USB Human Interface Devices (HID) > # > # CONFIG_USB_HID is not set > > # > # USB HID Boot Protocol drivers > # > # CONFIG_USB_KBD is not set > # CONFIG_USB_MOUSE is not set > # CONFIG_USB_AIPTEK is not set > # CONFIG_USB_WACOM is not set > # CONFIG_USB_KBTAB is not set > # CONFIG_USB_POWERMATE is not set > # CONFIG_USB_XPAD is not set > > # > # USB Imaging devices > # > # CONFIG_USB_MDC800 is not set > # CONFIG_USB_SCANNER is not set > # CONFIG_USB_MICROTEK is not set > # CONFIG_USB_HPUSBSCSI is not set > > # > # USB Multimedia devices > # > # CONFIG_USB_DABUSB is not set > > # > # Video4Linux support is needed for USB Multimedia device support > # > > # > # USB Network adaptors > # > # CONFIG_USB_CATC is not set > # CONFIG_USB_KAWETH is not set > # CONFIG_USB_PEGASUS is not set > # CONFIG_USB_RTL8150 is not set > # CONFIG_USB_USBNET is not set > > # > # USB port drivers > # > > # > # USB Serial Converter support > # > # CONFIG_USB_SERIAL is not set > > # > # USB Miscellaneous drivers > # > # CONFIG_USB_EMI62 is not set > # CONFIG_USB_EMI26 is not set > # CONFIG_USB_TIGL is not set > # CONFIG_USB_AUERSWALD is not set > # CONFIG_USB_RIO500 is not set > # CONFIG_USB_LEGOTOWER is not set > # CONFIG_USB_BRLVGER is not set > # CONFIG_USB_LCD is not set > # CONFIG_USB_LED is not set > # CONFIG_USB_TEST is not set > # CONFIG_USB_GADGET is not set > > # > # File systems > # > CONFIG_EXT2_FS=y > # CONFIG_EXT2_FS_XATTR is not set > # CONFIG_EXT3_FS is not set > # CONFIG_JBD is not set > CONFIG_REISERFS_FS=y > # CONFIG_REISERFS_CHECK is not set > # CONFIG_REISERFS_PROC_INFO is not set > # CONFIG_JFS_FS is not set > # CONFIG_XFS_FS is not set > # CONFIG_MINIX_FS is not set > # CONFIG_ROMFS_FS is not set > # CONFIG_QUOTA is not set > # CONFIG_AUTOFS_FS is not set > CONFIG_AUTOFS4_FS=y > > # > # CD-ROM/DVD Filesystems > # > CONFIG_ISO9660_FS=y > CONFIG_JOLIET=y > CONFIG_ZISOFS=y > CONFIG_ZISOFS_FS=y > CONFIG_UDF_FS=y > > # > # DOS/FAT/NT Filesystems > # > CONFIG_FAT_FS=y > CONFIG_MSDOS_FS=y > CONFIG_VFAT_FS=y > CONFIG_NTFS_FS=y > # CONFIG_NTFS_DEBUG is not set > CONFIG_NTFS_RW=y > > # > # Pseudo filesystems > # > CONFIG_PROC_FS=y > CONFIG_PROC_KCORE=y > # CONFIG_DEVFS_FS is not set > CONFIG_DEVPTS_FS=y > # CONFIG_DEVPTS_FS_XATTR is not set > CONFIG_TMPFS=y > # CONFIG_HUGETLBFS is not set > # CONFIG_HUGETLB_PAGE is not set > CONFIG_RAMFS=y > > # > # Miscellaneous filesystems > # > # CONFIG_ADFS_FS is not set > # CONFIG_AFFS_FS is not set > # CONFIG_HFS_FS is not set > # CONFIG_BEFS_FS is not set > # CONFIG_BFS_FS is not set > # CONFIG_EFS_FS is not set > # CONFIG_CRAMFS is not set > # CONFIG_VXFS_FS is not set > # CONFIG_HPFS_FS is not set > # CONFIG_QNX4FS_FS is not set > # CONFIG_SYSV_FS is not set > # CONFIG_UFS_FS is not set > > # > # Network File Systems > # > CONFIG_NFS_FS=y > # CONFIG_NFS_V3 is not set > # CONFIG_NFS_V4 is not set > # CONFIG_NFS_DIRECTIO is not set > CONFIG_NFSD=y > # CONFIG_NFSD_V3 is not set > # CONFIG_NFSD_TCP is not set > CONFIG_LOCKD=y > CONFIG_EXPORTFS=y > CONFIG_SUNRPC=y > # CONFIG_SUNRPC_GSS is not set > CONFIG_SMB_FS=y > # CONFIG_SMB_NLS_DEFAULT is not set > # CONFIG_CIFS is not set > # CONFIG_NCP_FS is not set > # CONFIG_CODA_FS is not set > # CONFIG_INTERMEZZO_FS is not set > # CONFIG_AFS_FS is not set > > # > # Partition Types > # > # CONFIG_PARTITION_ADVANCED is not set > CONFIG_MSDOS_PARTITION=y > > # > # Native Language Support > # > CONFIG_NLS=y > CONFIG_NLS_DEFAULT="iso8859-1" > CONFIG_NLS_CODEPAGE_437=y > # CONFIG_NLS_CODEPAGE_737 is not set > # CONFIG_NLS_CODEPAGE_775 is not set > CONFIG_NLS_CODEPAGE_850=y > # CONFIG_NLS_CODEPAGE_852 is not set > # CONFIG_NLS_CODEPAGE_855 is not set > # CONFIG_NLS_CODEPAGE_857 is not set > # CONFIG_NLS_CODEPAGE_860 is not set > # CONFIG_NLS_CODEPAGE_861 is not set > # CONFIG_NLS_CODEPAGE_862 is not set > # CONFIG_NLS_CODEPAGE_863 is not set > # CONFIG_NLS_CODEPAGE_864 is not set > # CONFIG_NLS_CODEPAGE_865 is not set > # CONFIG_NLS_CODEPAGE_866 is not set > # CONFIG_NLS_CODEPAGE_869 is not set > # CONFIG_NLS_CODEPAGE_936 is not set > # CONFIG_NLS_CODEPAGE_950 is not set > # CONFIG_NLS_CODEPAGE_932 is not set > # CONFIG_NLS_CODEPAGE_949 is not set > # CONFIG_NLS_CODEPAGE_874 is not set > # CONFIG_NLS_ISO8859_8 is not set > # CONFIG_NLS_CODEPAGE_1250 is not set > # CONFIG_NLS_CODEPAGE_1251 is not set > CONFIG_NLS_ISO8859_1=y > # CONFIG_NLS_ISO8859_2 is not set > # CONFIG_NLS_ISO8859_3 is not set > # CONFIG_NLS_ISO8859_4 is not set > # CONFIG_NLS_ISO8859_5 is not set > # CONFIG_NLS_ISO8859_6 is not set > # CONFIG_NLS_ISO8859_7 is not set > # CONFIG_NLS_ISO8859_9 is not set > # CONFIG_NLS_ISO8859_13 is not set > # CONFIG_NLS_ISO8859_14 is not set > # CONFIG_NLS_ISO8859_15 is not set > # CONFIG_NLS_KOI8_R is not set > # CONFIG_NLS_KOI8_U is not set > CONFIG_NLS_UTF8=y > > # > # Profiling support > # > # CONFIG_PROFILING is not set > > # > # Kernel hacking > # > # CONFIG_DEBUG_KERNEL is not set > # CONFIG_DEBUG_SPINLOCK_SLEEP is not set > # CONFIG_FRAME_POINTER is not set > > # > # Security options > # > # CONFIG_SECURITY is not set > > # > # Cryptographic options > # > # CONFIG_CRYPTO is not set > > # > # Library routines > # > CONFIG_CRC32=y > CONFIG_ZLIB_INFLATE=y > CONFIG_X86_BIOS_REBOOT=y > CONFIG_PC=y