* spontaneous reboots 2.6
@ 2004-02-11 19:30 Stephen Clark
0 siblings, 0 replies; only message in thread
From: Stephen Clark @ 2004-02-11 19:30 UTC (permalink / raw)
To: linux-kernel
Gentle people,
Since 2.6.2-rc1 on Jan 26 thru 2.6.2-mm1 I have had 5 occasions where my
system rebooted, nothing shows up in the system log. I had been using
2.4.20 without ever having had this happen.
Anybody have any ideas or additional information I can provide?
Hardware:
00:00.0 Host bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333]
00:01.0 PCI bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo
KT266/A/333 AGP]
00:08.0 Multimedia video controller: Brooktree Corporation Bt878 Video
Capture (rev 02)
00:08.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture
(rev 02)
00:09.0 Ethernet controller: Linksys Network Everywhere Fast Ethernet
10/100 model NC100 (rev 11)
00:0a.0 Ethernet controller: Linksys Network Everywhere Fast Ethernet
10/100 model NC100 (rev 11)
00:0b.0 SCSI storage controller: BusLogic BT-946C (BA80C30) [MultiMaster
10] (rev 08)
00:0d.0 Unknown mass storage controller: Promise Technology, Inc. 20265
(rev 02)
00:0e.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8233 PCI to ISA Bridge
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586/B/686A/B PIPC Bus
Master IDE (rev 06)
00:11.2 USB Controller: VIA Technologies, Inc. USB (rev 1b)
00:11.3 USB Controller: VIA Technologies, Inc. USB (rev 1b)
00:11.4 USB Controller: VIA Technologies, Inc. USB (rev 1b)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II]
(rev 70)
01:00.0 VGA compatible controller: ATI Technologies Inc Rage 128 RF/SG AGP
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2004-02-11 19:31 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-02-11 19:30 spontaneous reboots 2.6 Stephen Clark
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox