public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Mike Fedyk <mfedyk@matchmail.com>
To: Andrew Morton <akpm@osdl.org>
Cc: linux-kernel@vger.kernel.org
Subject: Re: 2.6.3-mm3
Date: Tue, 24 Feb 2004 18:51:43 -0800	[thread overview]
Message-ID: <403C0DBF.7040608@matchmail.com> (raw)
In-Reply-To: <20040222172200.1d6bdfae.akpm@osdl.org>

Andrew Morton wrote:
> 
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.3/2.6.3-mm3/

I have a dual CPU server that won't boot 2.6.3-mm3.  It will however 
boot vanilla 2.6.3.

Right after is says "uncompressing kernel" and "booting" it hangs.

Any patches I should try reverting?  I know it uses aic7xxx, but it 
doesn't even get to that point.  Does ACPI start that early?

model name      : Pentium III (Coppermine)
stepping        : 3
cpu MHz         : 664.913

00:00.0 Host bridge: ServerWorks CNB20LE Host Bridge (rev 05)
00:00.1 Host bridge: ServerWorks CNB20LE Host Bridge (rev 05)
00:02.0 PCI bridge: Intel Corp. 80960RM [i960RM Bridge] (rev 01)
00:08.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] 
(rev 08)
00:0e.0 VGA compatible controller: ATI Technologies Inc 3D Rage IIC (rev 7a)
00:0f.0 ISA bridge: ServerWorks OSB4 South Bridge (rev 4f)
00:0f.2 USB Controller: ServerWorks OSB4/CSB5 OHCI USB Controller (rev 04)
01:04.0 SCSI storage controller: Adaptec AHA-2940U2/U2W / 7890/7891 (rev 01)
01:06.0 SCSI storage controller: Adaptec AIC-7880U (rev 02)
02:06.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] 
(rev 08)
02:08.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] 
(rev 08)

  parent reply	other threads:[~2004-02-25  2:51 UTC|newest]

Thread overview: 73+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2004-02-23  1:22 2.6.3-mm3 Andrew Morton
2004-02-23  1:43 ` 2.6.3-mm3 Nick Piggin
2004-02-23  1:55   ` 2.6.3-mm3 Andrew Morton
2004-02-23  2:02     ` 2.6.3-mm3 Nick Piggin
2004-02-23  2:51     ` 2.6.3-mm3 Nick Piggin
2004-02-23  3:04       ` 2.6.3-mm3 Nick Piggin
2004-02-23  8:08         ` 2.6.3-mm3 Nick Piggin
2004-02-23  8:48           ` [PATCH] vm-fix-all_zones_ok (was Re: 2.6.3-mm3) Nick Piggin
2004-02-23  8:59             ` Andrew Morton
2004-02-23  9:21               ` Nick Piggin
2004-02-23  9:24                 ` Andrew Morton
2004-02-23 16:23                 ` Bill Davidsen
2004-02-23 22:47               ` Chris Wedgwood
2004-02-24  4:11                 ` Nick Piggin
2004-02-24  9:12                   ` Chris Wedgwood
2004-02-24  9:22                     ` Andrew Morton
2004-02-24  9:30                       ` Chris Wedgwood
2004-02-24  9:37                         ` Andrew Morton
2004-02-24 20:55                       ` Rik van Riel
2004-02-24 22:36                         ` Andrew Morton
2004-02-24 22:41                           ` Rik van Riel
2004-02-23  2:19 ` 2.6.3-mm3 Christoph Hellwig
2004-02-23  2:52 ` 2.6.3-mm3 Joshua Kwan
2004-02-23  3:34 ` 2.6.3-mm3 Joshua Kwan
2004-02-23 18:09 ` [patch] 2.6.3-mm3: ALSA miXart driver doesn't compile Adrian Bunk
2004-02-23 18:58 ` 2.6.3-mm3 (compile stats) John Cherry
2004-02-23 20:00   ` Sam Ravnborg
2004-02-24 22:22 ` 2.6.3-mm3 Mike Fedyk
2004-02-24 22:30   ` 2.6.3-mm3 Andrew Morton
2004-02-25 21:27     ` 2.6.3-mm3 Mike Fedyk
2004-02-26  1:06       ` 2.6.3-mm3 Nick Piggin
2004-02-26  1:18         ` 2.6.3-mm3 Marc-Christian Petersen
2004-02-26  1:28           ` 2.6.3-mm3 Mike Fedyk
2004-02-26  1:32         ` 2.6.3-mm3 Mike Fedyk
2004-02-26  1:52           ` 2.6.3-mm3 Nick Piggin
2004-02-26  2:34             ` 2.6.3-mm3 Mike Fedyk
2004-02-26  2:40               ` 2.6.3-mm3 Nick Piggin
2004-02-26  2:48                 ` 2.6.3-mm3 Mike Fedyk
2004-02-26  3:05                   ` 2.6.3-mm3 Nick Piggin
2004-02-26  3:19                     ` 2.6.3-mm3 Mike Fedyk
2004-02-26  3:29                       ` 2.6.3-mm3 Nick Piggin
2004-02-26  4:08                         ` 2.6.3-mm3 Mike Fedyk
2004-02-26  4:56             ` 2.6.3-mm3 Mike Fedyk
2004-02-27 19:02               ` 2.6.3-mm3 Mike Fedyk
2004-02-27 21:57                 ` 2.6.3-mm3 Nick Piggin
2004-02-25  0:26 ` 2.6.3-mm3 hangs on boot x440 (scsi?) john stultz
2004-02-25  1:06   ` Andrew Morton
2004-02-25  1:22     ` john stultz
2004-02-25  1:27       ` john stultz
2004-02-25  1:48       ` Andrew Morton
2004-02-25 22:15         ` john stultz
2004-02-26 14:40     ` Go Taniguchi
2004-02-26 21:26       ` john stultz
2004-02-26 23:02         ` john stultz
2004-02-26 23:15           ` Matthew Wilcox
2004-02-27  0:14             ` john stultz
2004-02-27  0:58               ` john stultz
2004-02-27  2:25             ` john stultz
2004-02-25  1:15 ` [PATCH 2.6.3-mm3] serialize_writeback_fdatawait patch Daniel McNeil
2004-02-25  1:43   ` Andrew Morton
2004-02-25 22:56     ` Daniel McNeil
2004-02-25  2:51 ` Mike Fedyk [this message]
2004-02-25  3:09   ` 2.6.3-mm3 Andrew Morton
2004-02-25  3:34     ` 2.6.3-mm3 Mike Fedyk
2004-02-25 10:47 ` 2.6.3-mm3 sometimes freeze on "sync" Helge Hafting
2004-02-25  9:39   ` Andrew Morton
2004-02-26  8:49     ` Helge Hafting
2004-02-27 14:49       ` Alexander Hoogerhuis
2004-02-27 23:34 ` 2.6.3-mm3 john stultz
2004-02-28  0:06   ` 2.6.3-mm3 Andrew Morton
2004-02-28  2:48     ` 2.6.3-mm3 (ioremap failure w/ _X86_4G and _NUMA) john stultz
2004-02-28  3:18       ` Dave Hansen
2004-02-28  4:34       ` Martin J. Bligh

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=403C0DBF.7040608@matchmail.com \
    --to=mfedyk@matchmail.com \
    --cc=akpm@osdl.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox