From: Jo Christian Buvarp <jcb@svorka.no>
To: Marcelo Tosatti <marcelo.tosatti@cyclades.com>
Cc: Enrico Demarin <enricod@videotron.ca>,
linux-kernel@vger.kernel.org, "Moore,
Eric Dean" <Emoore@lsil.com>, Andrew Morton <akpm@osdl.org>
Subject: Re: Ibm Serveraid Problem with 2.4.25
Date: Fri, 27 Feb 2004 08:16:09 +0100 [thread overview]
Message-ID: <403EEEB9.5030408@svorka.no> (raw)
In-Reply-To: <Pine.LNX.4.58L.0402270011140.2029@logos.cnet>
No, I only got IBM ServeRAID support
--------------------------------------------------------------
Med vennlig hilsen/Yours sincerely
Jo Christian Buvarp
Teknisk Leder
Svorka Aksess AS
Notice:
This e-mail may contain confidential and privileged material for the sole use of the intended recipient. Any review or distribution by others is strictly prohibited. If this e-mail is received by others than the intended recipient, please contact the sender and delete all copies.
Marcelo Tosatti wrote:
>Jo,
>
>You're also using the MPT Fusion driver?
>
>It has been updated in 2.4.25, and probably something broke. DAMN.
>
>Eric, please look into this for us ?
>
>On Thu, 26 Feb 2004, Enrico Demarin wrote:
>
>
>
>>Hi everyone,
>>
>>I just checked, same message on a IBM x235 , it uses the
>>
>>Fusion MPT SCSI Host driver 2.05.11.03
>>
>>driver.
>>
>>Same message as you ( except the offsets vary ) when I reboot.
>>
>>- Enrico
>>
>>On Thu, 2004-02-26 at 18:48, Enrico Demarin wrote:
>>
>>
>>>I have the same here using the "partially opensource" drivers for a
>>>Promise TX2... no message on 2.4.24.I wonder if it also means it's
>>>corrupting the FS ? :(
>>>
>>>
>>>- Enrico
>>>
>>>On Thu, 2004-02-26 at 04:12, Jo Christian Buvarp wrote:
>>>
>>>
>>>>Just upgraded my server with the 2.4.25 kernel and I noticed an error :/
>>>>The server is an IBM 345 with a Serveraid 5I controller, when doing an
>>>>dmesg i get this error:
>>>>
>>>>attempt to access beyond end of device
>>>>08:05: rw=0, want=528036, limit=528034
>>>>attempt to access beyond end of device
>>>>08:09: rw=0, want=65208120, limit=65208118
>>>>
>>>>This error only shows up in 2.4.25, when rebooting to 2.4.24 everything
>>>>looks fine :)
>>>>I tried upgrading the serveraid bios to the newest version (6.11.07),
>>>>but i still got the error.
>>>>
>>>>So is this an bug in the kernel? Or do I have a problem on my server ?
>>>>Is it safe to run 2.4.25 with this error ? Or should i go back to 2.4.24
>>>>
>>>>
next prev parent reply other threads:[~2004-02-27 7:17 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-02-26 9:12 Ibm Serveraid Problem with 2.4.25 Jo Christian Buvarp
2004-02-26 23:48 ` Enrico Demarin
2004-02-27 1:48 ` Enrico Demarin
2004-02-27 3:14 ` Marcelo Tosatti
2004-02-27 2:37 ` Enrico Demarin
2004-02-27 7:16 ` Jo Christian Buvarp [this message]
2004-02-27 14:36 ` Marcelo Tosatti
2004-03-01 2:10 ` Alain Fauconnet
2004-03-01 3:10 ` Enrico Demarin
2004-03-01 3:30 ` Alain Fauconnet
2004-03-01 15:01 ` Enrico Demarin
2004-03-01 15:51 ` Marcelo Tosatti
2004-03-01 17:24 ` Chuck Lever
2004-03-01 18:23 ` Marcelo Tosatti
2004-03-01 18:39 ` Chuck Lever
2004-03-01 18:41 ` Enrico Demarin
2004-03-02 5:18 ` Chuck Lever
[not found] <Pine.LNX.4.44.0403011149560.4148-200000@dmt.cyclades>
2004-03-01 15:38 ` Jo Christian Buvarp
-- strict thread matches above, loose matches on Subject: below --
2004-03-01 21:38 Alan Swanson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=403EEEB9.5030408@svorka.no \
--to=jcb@svorka.no \
--cc=Emoore@lsil.com \
--cc=akpm@osdl.org \
--cc=enricod@videotron.ca \
--cc=linux-kernel@vger.kernel.org \
--cc=marcelo.tosatti@cyclades.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox