From: Mike Fedyk <mfedyk@matchmail.com>
To: Rumi Szabolcs <rumi_ml@rtfm.hu>
Cc: linux-kernel@vger.kernel.org, Jeff Garzik <jgarzik@pobox.com>,
Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Subject: Re: Marvell PATA-SATA bridge meets 2.4.x
Date: Sat, 06 Mar 2004 19:55:00 -0800 [thread overview]
Message-ID: <404A9D14.5030107@matchmail.com> (raw)
In-Reply-To: <20040305231642.708841dd.rumi_ml@rtfm.hu>
Rumi Szabolcs wrote:
> Hello!
>
> A while ago I reported a problem with the 2.4.22 kernel and the
> tiny Marvell PATA to SATA bridge chip that is used on many of
> the now-not-so-recent motherboards which don't have native
> SATA ports in their southbridges.
>
> As it can be seen below, a native SATA150 drive is connected
> to a SATA port implemented using that Marvell chip hooked up
> to the ICH4's parallel ATA133 port and this way the drive is
> only recognized (and used) as UDMA33:
>
> ICH4: IDE controller at PCI slot 00:1f.1
> ICH4: chipset revision 2
> ICH4: not 100% native mode: will probe irqs later
> ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio
> ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio
> hdc: ST3160023AS, ATA DISK drive
> blk: queue c04a1ff4, I/O limit 4095Mb (mask 0xffffffff)
> ide1 at 0x170-0x177,0x376 on irq 15
> hdc: attached ide-disk driver.
> hdc: host protected area => 1
> hdc: 312581808 sectors (160042 MB) w/8192KiB Cache, CHS=19457/255/63, UDMA(33)
>
> As far as I can remember someone (Jeff Garzik?) suspected the
> SATA cable not being recognized as a 80-conductor thus >=UDMA66
> capable cable. Then it was told that there is a fix underway that
> will be included in the 2.4.23 kernel. The above snippet shows
> that the 2.4.25 kernel still has this problem. Any comments?
You want to use a 2.6 kernel and talk to Bart, and Jeff about this...
next prev parent reply other threads:[~2004-03-07 3:55 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-03-05 22:16 Marvell PATA-SATA bridge meets 2.4.x Rumi Szabolcs
2004-03-07 3:55 ` Mike Fedyk [this message]
2004-03-08 16:28 ` Rumi Szabolcs
2004-03-08 22:07 ` Mike Fedyk
2004-03-08 23:53 ` Rumi Szabolcs
2004-03-09 4:06 ` Mike Fedyk
2004-03-11 7:20 ` Andre Hedrick
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=404A9D14.5030107@matchmail.com \
--to=mfedyk@matchmail.com \
--cc=B.Zolnierkiewicz@elka.pw.edu.pl \
--cc=jgarzik@pobox.com \
--cc=linux-kernel@vger.kernel.org \
--cc=rumi_ml@rtfm.hu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox