From: Otto Meier <gf435@gmx.net>
To: linux-kernel@vger.kernel.org
Subject: dl2k driver in 2.6.4
Date: Tue, 09 Mar 2004 16:15:37 +0100 [thread overview]
Message-ID: <404DDF99.3080408@gmx.net> (raw)
[-- Attachment #1: Type: text/plain, Size: 5030 bytes --]
The kernel driver has release Nr. 1.17a. On the dlink ftp server
exists a newer release 1.18b. which has a modified TX Path.
I need this because the 1.17a version stops working under heavy load the
1.18b version works under 2.4
Unfortuatly it is for kernel 2.4. But by good luck the attached diff against
kernel 2.6.4-rc2 is compilable. when loaded it spit out a lot of
messages like
this:
Mar 9 15:12:07 gate2 kernel: handlers:
Mar 9 15:12:07 gate2 kernel: [__crc_dev_getfirstbyhwtype+78192/2170958]
(rio_interrupt+0x0/0x110 [dl2k])
Mar 9 15:12:07 gate2 kernel: [<e13b0460>] (rio_interrupt+0x0/0x110 [dl2k])
Mar 9 15:12:07 gate2 kernel: irq event 16: bogus return value 1388
Mar 9 15:12:07 gate2 kernel: Call Trace:
Mar 9 15:12:07 gate2 kernel: [__report_bad_irq+42/144]
__report_bad_irq+0x2a/0x90
Mar 9 15:12:07 gate2 kernel: [<c010acea>] __report_bad_irq+0x2a/0x90
Mar 9 15:12:07 gate2 kernel: [note_interrupt+131/192]
note_interrupt+0x83/0xc0
Mar 9 15:12:07 gate2 kernel: [<c010adf3>] note_interrupt+0x83/0xc0
Mar 9 15:12:07 gate2 kernel: [do_IRQ+278/320] do_IRQ+0x116/0x140
Mar 9 15:12:07 gate2 kernel: [<c010b0b6>] do_IRQ+0x116/0x140
Mar 9 15:12:07 gate2 kernel: [rest_init+0/80] _stext+0x0/0x50
Mar 9 15:12:07 gate2 kernel: [<c0103000>] _stext+0x0/0x50
Mar 9 15:12:07 gate2 kernel: [common_interrupt+24/32]
common_interrupt+0x18/0x20
Mar 9 15:12:07 gate2 kernel: [<c032922c>] common_interrupt+0x18/0x20
Mar 9 15:12:07 gate2 kernel: [default_idle+0/64] default_idle+0x0/0x40
Mar 9 15:12:07 gate2 kernel: [<c0107030>] default_idle+0x0/0x40
Mar 9 15:12:07 gate2 kernel: [rest_init+0/80] _stext+0x0/0x50
Mar 9 15:12:07 gate2 kernel: [<c0103000>] _stext+0x0/0x50
Mar 9 15:12:07 gate2 kernel: [default_idle+44/64] default_idle+0x2c/0x40
Mar 9 15:12:07 gate2 kernel: [<c010705c>] default_idle+0x2c/0x40
Mar 9 15:12:07 gate2 kernel: [cpu_idle+52/80] cpu_idle+0x34/0x50
Mar 9 15:12:07 gate2 kernel: [<c01070e4>] cpu_idle+0x34/0x50
Mar 9 15:12:07 gate2 kernel: [start_kernel+451/528]
start_kernel+0x1c3/0x210
Mar 9 15:12:07 gate2 kernel: [<c0408973>] start_kernel+0x1c3/0x210
Mar 9 15:12:07 gate2 kernel: [unknown_bootoption+0/304]
unknown_bootoption+0x0/0x130
Mar 9 15:12:07 gate2 kernel: [<c0408480>] unknown_bootoption+0x0/0x130
Mar 9 15:12:07 gate2 kernel:
Mar 9 15:12:07 gate2 kernel: handlers:
Mar 9 15:12:07 gate2 kernel: [__crc_dev_getfirstbyhwtype+78192/2170958]
(rio_interrupt+0x0/0x110 [dl2k])
Mar 9 15:12:07 gate2 kernel: [<e13b0460>] (rio_interrupt+0x0/0x110
[dl2k])Mar 9 15:32:13 gate2 kernel: irq event 16: bogus return value 1388
Mar 9 15:12:08 gate2 kernel: eth0: Link up
Mar 9 15:12:08 gate2 kernel: Auto 1000 Mbps, Full duplex
Mar 9 15:12:08 gate2 kernel: Enable Tx Flow Control
Mar 9 15:12:08 gate2 kernel: Enable Rx Flow Control
but it starts working
after a while it stops to operate with following messages:
Mar 9 15:32:13 gate2 kernel: irq event 16: bogus return value 1388
Mar 9 15:32:13 gate2 kernel: Call Trace:
Mar 9 15:32:13 gate2 kernel: [__report_bad_irq+42/144]
__report_bad_irq+0x2a/0x90
Mar 9 15:32:13 gate2 kernel: [<c010acea>] __report_bad_irq+0x2a/0x90
Mar 9 15:32:13 gate2 kernel: [note_interrupt+149/192]
note_interrupt+0x95/0xc0
Mar 9 15:32:13 gate2 kernel: [<c010ae05>] note_interrupt+0x95/0xc0
Mar 9 15:32:13 gate2 kernel: [do_IRQ+278/320] do_IRQ+0x116/0x140
Mar 9 15:32:13 gate2 kernel: [<c010b0b6>] do_IRQ+0x116/0x140
Mar 9 15:32:13 gate2 kernel: [rest_init+0/80] _stext+0x0/0x50
Mar 9 15:32:13 gate2 kernel: [<c0103000>] _stext+0x0/0x50
Mar 9 15:32:13 gate2 kernel: [common_interrupt+24/32]
common_interrupt+0x18/0x20
Mar 9 15:32:13 gate2 kernel: [<c032922c>] common_interrupt+0x18/0x20
Mar 9 15:32:13 gate2 kernel: [default_idle+0/64] default_idle+0x0/0x40
Mar 9 15:32:13 gate2 kernel: [<c0107030>] default_idle+0x0/0x40
Mar 9 15:32:13 gate2 kernel: [rest_init+0/80] _stext+0x0/0x50
Mar 9 15:32:13 gate2 kernel: [<c0103000>] _stext+0x0/0x50
Mar 9 15:32:13 gate2 kernel: [default_idle+44/64] default_idle+0x2c/0x40
Mar 9 15:32:13 gate2 kernel: [<c010705c>] default_idle+0x2c/0x40
Mar 9 15:32:13 gate2 kernel: [cpu_idle+52/80] cpu_idle+0x34/0x50
Mar 9 15:32:13 gate2 kernel: [<c01070e4>] cpu_idle+0x34/0x50
Mar 9 15:32:13 gate2 kernel: [start_kernel+451/528]
start_kernel+0x1c3/0x210
Mar 9 15:32:13 gate2 kernel: [<c0408973>] start_kernel+0x1c3/0x210
Mar 9 15:32:13 gate2 kernel: [unknown_bootoption+0/304]
unknown_bootoption+0x0/0x130
Mar 9 15:32:13 gate2 kernel: [<c0408480>] unknown_bootoption+0x0/0x130
Mar 9 15:32:13 gate2 kernel:
Mar 9 15:32:13 gate2 kernel: handlers:
Mar 9 15:32:13 gate2 kernel: [__crc_dev_getfirstbyhwtype+78192/2170958]
(rio_interrupt+0x0/0x110 [dl2k])
Mar 9 15:32:13 gate2 kernel: [<e13b0460>] (rio_interrupt+0x0/0x110 [dl2k])
Mar 9 15:32:13 gate2 kernel: Disabling IRQ #16
I have not the skills to migrate the 1.18b version to kernel 2.6. It
would be very nice if someone
could review the patch and give the needed guidance.
[-- Attachment #2: dl-1.18b.diff.gz --]
[-- Type: application/x-gunzip, Size: 8261 bytes --]
reply other threads:[~2004-03-09 15:15 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=404DDF99.3080408@gmx.net \
--to=gf435@gmx.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox