From: Thomas Steudten <alpha@steudten.com>
To: linux-kernel@vger.kernel.org
Subject: Msg from scsi aic7xxx driver or PCI layer on alpha
Date: Fri, 12 Mar 2004 16:42:59 +0100 [thread overview]
Message-ID: <4051DA83.90902@steudten.com> (raw)
Hi
I got this messages from the pci allocator and the
scsi aic7xxx driver on kernel 2.6.4 on alpha after
reboot: (why is this driver don´t using dma?)
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
<Adaptec 2940 Ultra SCSI adapter>
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
[..]
scsi0:A:3:0: Tagged Queuing enabled. Depth 128
PCI: Enabling device: (0000:00:07.0), cmd 7
XXX PCI: Unable to reserve mem region #2:1000@a051000 for device 0000:00:07.0
aic7xxx: <Adaptec AHA-294X Ultra SCSI host adapter> at PCI 0/7/0
XXX aic7xxx: I/O ports already in use, ignoring.
lspci -vv gives
00:07.0 SCSI storage controller: Adaptec AHA-2940U/UW/D / AIC-7881U (rev 01)
Subsystem: Adaptec AHA-2940UW SCSI Host Adapter
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (2000ns min, 2000ns max), cache line size 08
Interrupt: pin A routed to IRQ 26
Region 0: I/O ports at 8400 [size=256]
Region 1: Memory at 000000000a051000 (32-bit, non-prefetchable)
[size=4K]
Expansion ROM at 000000000a040000 [disabled] [size=64K]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
--
Tom
LINUX user since kernel 0.99.x 1994.
RPM Alpha packages at http://alpha.steudten.com/packages
Want to know what S.u.S.E 1995 cdrom-set contains?
next reply other threads:[~2004-03-12 15:43 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-03-12 15:42 Thomas Steudten [this message]
2004-03-12 22:55 ` Msg from scsi aic7xxx driver or PCI layer on alpha Ivan Kokshaysky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4051DA83.90902@steudten.com \
--to=alpha@steudten.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox