From: Janos Makadi <maki@freemail.hu>
To: linux-kernel@vger.kernel.org
Subject: Serial card
Date: Sat, 20 Mar 2004 16:37:33 +0100 [thread overview]
Message-ID: <405C653D.10008@freemail.hu> (raw)
Hello,
I have a SWEEX i/o CARD, which has two serial, and one paralell ports.
On the board is a Netmos (Moschip) Nm9835cv. Is it possible to use this
card with the 2.6 series kernel? I`m searching on the net two days now,
but didn`t found any information. Using setserial for setup failed.
lspci -v :
00:0b.0 Communication controller: Unknown device 9710:9835 (rev 01)
Subsystem: LSI Logic / Symbios Logic (formerly NCR): Unknown device 0012
Flags: medium devsel, IRQ 11
I/O ports at b400 [disabled] [size=8]
I/O ports at b000 [disabled] [size=8]
I/O ports at a800 [disabled] [size=8]
I/O ports at a400 [disabled] [size=8]
I/O ports at a000 [disabled] [size=8]
I/O ports at 9800 [disabled] [size=16]
/proc/pci :
Bus 0, device 11, function 0:
Communication controller: NetMos Technology 222N-2 I/O Card (2S+1P)
(rev 1).
IRQ 11.
Master Capable. Latency=32.
I/O at 0xb400 [0xb407].
I/O at 0xb000 [0xb007].
I/O at 0xa800 [0xa807].
I/O at 0xa400 [0xa407].
I/O at 0xa000 [0xa007].
I/O at 0x9800 [0x980f].
Regards,
Janos
reply other threads:[~2004-03-20 15:33 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=405C653D.10008@freemail.hu \
--to=maki@freemail.hu \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox