* Serial card
@ 2004-03-20 15:37 Janos Makadi
0 siblings, 0 replies; only message in thread
From: Janos Makadi @ 2004-03-20 15:37 UTC (permalink / raw)
To: linux-kernel
Hello,
I have a SWEEX i/o CARD, which has two serial, and one paralell ports.
On the board is a Netmos (Moschip) Nm9835cv. Is it possible to use this
card with the 2.6 series kernel? I`m searching on the net two days now,
but didn`t found any information. Using setserial for setup failed.
lspci -v :
00:0b.0 Communication controller: Unknown device 9710:9835 (rev 01)
Subsystem: LSI Logic / Symbios Logic (formerly NCR): Unknown device 0012
Flags: medium devsel, IRQ 11
I/O ports at b400 [disabled] [size=8]
I/O ports at b000 [disabled] [size=8]
I/O ports at a800 [disabled] [size=8]
I/O ports at a400 [disabled] [size=8]
I/O ports at a000 [disabled] [size=8]
I/O ports at 9800 [disabled] [size=16]
/proc/pci :
Bus 0, device 11, function 0:
Communication controller: NetMos Technology 222N-2 I/O Card (2S+1P)
(rev 1).
IRQ 11.
Master Capable. Latency=32.
I/O at 0xb400 [0xb407].
I/O at 0xb000 [0xb007].
I/O at 0xa800 [0xa807].
I/O at 0xa400 [0xa407].
I/O at 0xa000 [0xa007].
I/O at 0x9800 [0x980f].
Regards,
Janos
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2004-03-20 15:33 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-03-20 15:37 Serial card Janos Makadi
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox