From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S263444AbUCTPdW (ORCPT ); Sat, 20 Mar 2004 10:33:22 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S263447AbUCTPdW (ORCPT ); Sat, 20 Mar 2004 10:33:22 -0500 Received: from viefep18-int.chello.at ([213.46.255.21]:48175 "EHLO viefep18-int.chello.at") by vger.kernel.org with ESMTP id S263444AbUCTPdU (ORCPT ); Sat, 20 Mar 2004 10:33:20 -0500 Message-ID: <405C653D.10008@freemail.hu> Date: Sat, 20 Mar 2004 16:37:33 +0100 From: Janos Makadi User-Agent: Mozilla Thunderbird 0.5 (X11/20040208) X-Accept-Language: en-us, en MIME-Version: 1.0 To: linux-kernel@vger.kernel.org Subject: Serial card Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Hello, I have a SWEEX i/o CARD, which has two serial, and one paralell ports. On the board is a Netmos (Moschip) Nm9835cv. Is it possible to use this card with the 2.6 series kernel? I`m searching on the net two days now, but didn`t found any information. Using setserial for setup failed. lspci -v : 00:0b.0 Communication controller: Unknown device 9710:9835 (rev 01) Subsystem: LSI Logic / Symbios Logic (formerly NCR): Unknown device 0012 Flags: medium devsel, IRQ 11 I/O ports at b400 [disabled] [size=8] I/O ports at b000 [disabled] [size=8] I/O ports at a800 [disabled] [size=8] I/O ports at a400 [disabled] [size=8] I/O ports at a000 [disabled] [size=8] I/O ports at 9800 [disabled] [size=16] /proc/pci : Bus 0, device 11, function 0: Communication controller: NetMos Technology 222N-2 I/O Card (2S+1P) (rev 1). IRQ 11. Master Capable. Latency=32. I/O at 0xb400 [0xb407]. I/O at 0xb000 [0xb007]. I/O at 0xa800 [0xa807]. I/O at 0xa400 [0xa407]. I/O at 0xa000 [0xa007]. I/O at 0x9800 [0x980f]. Regards, Janos