From: Petr Sebor <petr@scssoft.com>
To: Jeff Garzik <jgarzik@pobox.com>
Cc: linux-kernel@vger.kernel.org
Subject: Re: [sata] libata update
Date: Wed, 31 Mar 2004 00:59:15 +0200 [thread overview]
Message-ID: <4069FBC3.2080104@scssoft.com> (raw)
In-Reply-To: <4064E691.2070009@pobox.com>
[-- Attachment #1: Type: text/plain, Size: 2526 bytes --]
Hi Jeff,
I have upgraded from 2.6.3 to 2.6.5-rc3 and can't see the secondary
sata drive anymore...
I am seeing this:
-------------------------------------------------------------------
libata version 1.02 loaded.
sata_via version 0.20
sata_via(0000:00:0f.0): routed to hard irq line 11
ata1: SATA max UDMA/133 cmd 0xC400 ctl 0xC802 bmdma 0xD400 irq 20
ata2: SATA max UDMA/133 cmd 0xCC00 ctl 0xD002 bmdma 0xD408 irq 20
ata1: dev 0 cfg 49:2f00 82:346b 83:7f21 84:4003 85:3469 86:3c01 87:4003
88:203f
ata1: dev 0 ATA, max UDMA/100, 488397168 sectors (lba48)
ata1: dev 0 configured for UDMA/100
scsi0 : sata_via
ata2: no device found (phy stat 00000000)
ata2: thread exiting
scsi1 : sata_via
Using anticipatory io scheduler
Vendor: ATA Model: WDC WD2500JD-00F Rev: 1.02
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
SCSI device sda: drive cache: write through
sda: sda1 sda2
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0
--------------------------------------------------------------------
instead of this:
libata version 1.00 loaded.
sata_via version 0.11
ata1: SATA max UDMA/133 cmd 0xC400 ctl 0xC802 bmdma 0xD400 irq 20
ata2: SATA max UDMA/133 cmd 0xCC00 ctl 0xD002 bmdma 0xD408 irq 20
ata1: dev 0 cfg 49:2f00 82:346b 83:7f21 84:4003 85:3469 86:3c01 87:4003
88:203f
ata1: dev 0 ATA, max UDMA/100, 488397168 sectors (lba48)
ata1: dev 0 configured for UDMA/100
scsi0 : sata_via
ata2: dev 0 cfg 49:2f00 82:346b 83:7f21 84:4003 85:3469 86:3c01 87:4003
88:407f
ata2: dev 0 ATA, max UDMA/133, 72303840 sectors (lba48)
ata2: dev 0 configured for UDMA/133
scsi1 : sata_via
Using anticipatory io scheduler
Vendor: ATA Model: WDC WD2500JD-00F Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 05
Vendor: ATA Model: WDC WD360GD-00FN Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
SCSI device sda: drive cache: write through
sda: sda1 sda2
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sdb: 72303840 512-byte hdwr sectors (37020 MB)
SCSI device sdb: drive cache: write through
sdb: sdb1
Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0
Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0, type 0
Regards,
Petr
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 254 bytes --]
next prev parent reply other threads:[~2004-03-30 23:04 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-03-27 2:27 [sata] libata update Jeff Garzik
2004-03-30 22:59 ` Petr Sebor [this message]
2004-03-30 23:14 ` Jeff Garzik
2004-03-31 1:43 ` Jarno Paananen
2004-03-31 1:50 ` Jeff Garzik
2004-03-31 1:53 ` Jarno Paananen
2004-03-30 23:16 ` Jeff Garzik
2004-03-30 23:26 ` Petr Sebor
2004-03-30 23:39 ` Bartlomiej Zolnierkiewicz
2004-03-30 23:47 ` Jeff Garzik
2004-03-31 0:28 ` Bartlomiej Zolnierkiewicz
2004-03-31 2:33 ` Jeff Garzik
2004-03-31 8:24 ` [PATCH] " Jeff Garzik
2004-03-31 11:50 ` Petr Sebor
2004-03-31 16:41 ` Jarno Paananen
2004-03-31 16:48 ` Jeff Garzik
2004-03-31 17:21 ` Jarno Paananen
2004-03-31 21:04 ` Jeff Garzik
2004-04-01 7:35 ` Petr Sebor
-- strict thread matches above, loose matches on Subject: below --
2004-04-25 2:48 Jeff Garzik
2004-04-25 4:24 ` J. Ryan Earl
2004-03-31 21:02 Jeff Garzik
2004-04-03 0:45 ` Erik Andersen
2004-03-30 21:31 Jeff Garzik
2004-03-27 22:07 Henrik Gustafsson
2004-03-27 22:20 ` Jeff Garzik
2004-03-23 18:04 Jeff Garzik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4069FBC3.2080104@scssoft.com \
--to=petr@scssoft.com \
--cc=jgarzik@pobox.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox